Bioelectrochemical acetate and isopropanol production
Ontology highlight
ABSTRACT:
PROVIDER: PRJEB20993 | ENA |
REPOSITORIES: ENA
Similar Datasets
Project description:Due to increasing ecological concerns, recombinant microbial production of biochemicals from sustainable carbon sources like acetate is rapidly gaining importance. However, for establishing successful large-scale production scenarios, a solid understanding of metabolic driving forces is required to inform bioprocess design. To generate such knowledge, we constructed isopropanol-producing Escherichia coli W strains. Based on strain screening and metabolic considerations a 2-stage process was designed incorporating a growth phase followed by a nitrogen starvation phase. This process design yielded the highest isopropanol titers on acetate to date (13.3 g L-1). Additionally, we performed shotgun and acetylated proteomics and identified several stress conditions in the bioreactor scenarios, such as acid stress and impaired sulfur uptake. Metabolic modelling allowed for an in-depth characterization of intracellular flux distributions, uncovering ATP availability as a determining factor for routing carbon towards the isopropanol pathway. Moreover, we asserted the importance of a balance between fluxes of the NADPH-providing isocitrate dehydrogenase (ICDH) and the product pathway. Using the newly gained system-level understanding for isopropanol production from acetate, we assessed possible engineering approaches and propose process designs to maximize production. Collectively, our work contributes to the establishment and optimization of acetate-based bioproduction systems.
2024-10-17 | PXD047939 | Pride
Project description:Cheap and renewable feedstocks such as the one carbon substrate formate are emerging for sustainable production in a growing chemical industry. By quantitatively analyzing physiology, transcriptome, proteome in chemostat cultivations in combination with computational analyses, we investigated the acetogen Acetobacterium woodii as a potential host for bioproduction from formate alone and together with autotrophic and heterotrophic co-substrates. Continuous cultivations with a specific growth rate of 0.05 h-1 on formate showed high specific substrate uptake rates (47 mmol g‑1 h‑1). Co-utilization of formate with H2, CO, CO2 or fructose was achieved without catabolite repression and with acetate as the sole metabolic product. A transcriptomic comparison of all growth conditions revealed a distinct adaptation of A. woodii to growth on formate as 570 genes were changed in their transcription. Transcriptome and proteome showed higher expression of the Wood-Ljungdahl pathway during growth on formate and gaseous substrates, underlining its function during utilization of one carbon substrates. Flux balance analysis showed varying flux levels for the WLP (0.7-16.4 mmol/g/h) and major differences in redox and energy metabolism. Growth on formate, H2/CO2, and formate+H2/CO2 resulted in low energy availability (0.20-0.22 ATP/acetate) which was increased during co-utilization with CO or fructose (0.31 ATP/acetate for formate+H2/CO/CO2, 0.75 ATP/acetate for formate+fructose). Unitrophic and mixotrophic conversion of all substrates was further characterized by high energetic efficiencies. In silico analysis of bioproduction of ethanol and lactate from formate and autotrophic and heterotrophic co-substrates showed promising energetic efficiencies (70-92%). Collectively, our findings reveal A. woodii as a promising host for flexible and simultaneous bioconversion of multiple substrates, underline the potential of substrate co-utilization to improve the energy availability of acetogens and encourage metabolic engineering of acetogenic bacteria for the efficient synthesis of bulk chemicals and fuels from sustainable one carbon substrates.
2023-03-08 | PXD026569 | Pride
Project description:Understand the mechanisms of evolution in large-scale bio-production by tracking population dynamics leading to production decline in mevalonic acid-producing Escherichia coli. Industrial bioproduction entails growth of the production host to large bioreactors (e.g. 1-300 m3). This may put the organism at risk for generating non-producing subpopulations of genetic heterogeneity, which is not phenotypically detected at lab-scale (e.g. 2 L). To study these dynamics, we experimentally simulated these growth durations by passing mevalonic acid-producing E. coli to maintain the populations in exponential growth for 45 generations.
2018-01-19 | E-MTAB-5862 | biostudies-arrayexpress
Project description:Graphene oxide (GO) is an emerging material for energy and environmental applications, but it has been primarily produced using chemical processes involving high energy consumption and hazardous chemicals. In this study, we reported a new bioelectrochemical method to produce GO from graphite under ambient conditions without chemical amendments, value-added organic compounds and high rate H2 were also produced. Compared with abiotic electrochemical electrolysis control, the microbial assisted graphite oxidation produced high rate of graphite oxide and graphene oxide (BEGO) sheets, CO2, and current at lower applied voltage. The resultant electrons are transferred to a biocathode, where H2 and organic compounds are produced by microbial reduction of protons and CO2, respectively, a process known as microbial electrosynthesis (MES). Pseudomonas is the dominant population on the anode, while abundant anaerobic solvent-producing bacteria Clostridium carboxidivorans is likely responsible for electrosynthesis on the cathode. Oxygen production through water electrolysis was not detected on the anode due to the presence of facultative and aerobic bacteria as O2 sinkers. This new method provides a sustainable route for producing graphene materials and renewable H2 at low cost, and it may stimulate a new area of research in MES.
| S-EPMC4647224 | biostudies-literature
Project description:Acetate is a simple carboxylic acid that is synthesized in various microorganisms. Although acetate toxicity and tolerance have been studied in many microorganisms, little is known about the effects of exogenous acetate on the cell growth of acetogenic bacteria. In this study, we report the phenotypic changes that occurred in the acetogenic bacterium Clostridium sp. AWRP as a result of an adaptive laboratory evolution under acetate challenge. When compared with the wild-type strain, the acetate-adapted strain displayed a tolerance to acetate up to 10 g L-1 and higher biomass yields in batch cultures, although the metabolite profiles greatly varied depending on culture conditions. Interestingly, genome sequencing revealed that the adapted strain harbored three point mutations in the genes encoding an electron-bifurcating hydrogenase, which is crucial to its autotrophic growth on CO2 + H2, in addition to one in the dnaK gene. Transcriptome analysis revealed the global change in the gene expression profile of the acetate-adapted strain. Strikingly, most genes involved in CO2-fixing Wood-Ljungdahl pathway and auxiliary pathways for energy conservation (e.g., Rnf complex, Nfn, etc.) were significantly down-regulated. In addition, we observed that a couple of metabolic pathways associated with dissimilation of nucleosides and carbohydrates were significantly up-regulated in the acetate-adapted strain as well as several amino acid biosynthetic pathways, indicating that the strain might increase its fitness by utilizing organic substrates in response to the down-regulation of carbon fixation. Further investigation into the carbon fixation degeneration of the acetate-adapted strain will provide practical implications in CO2 + H2 fermentation using acetogenic bacteria for long-term continuous fermentation. The transcriptome profiles of the wild-type Clostridium sp. AWRP and its acetate-tolerant derivative 46T-a were compared.
2022-06-26 | GSE206757 | GEO
Project description:P. tricornutum (Bacillariophyta, Pennatae, NEPCC640) was obtained from the Algal Center of the Institute of Oceanology of the Chinese Academy of Sciences. The cells were cultured in a modified f/2 medium (Guillard, 1975) at 20 +/- 1C, and illuminated with 120 umol photon m-2 s-1 under a 12:12 light: dark cycle. Flasks were shaken by the researchers twice a day at the fixed times. Experiments were conducted in triplicate in 3L sterilized and acid-washed Erlenmeyer flask containing 2L medium. The equipment used in this study is similar to the ones used in previous ocean acidification research (Fu et al., 2007; Hutchins et al., 2007; Wu et al., 2010). Prior to inoculation, the mediums were treated by different CO2 concentrations. The low CO2 medium was bubbled with ambient air of about 400 ppmv (low CO2, LC) and the high CO2 medium was bubbled with pre-mixed air-CO2 mixtures (1000 ppmv; high CO2, HC) from a plant growth CO2 chamber (HP400G-D, Ruihua Instrument & Equipment Ltd, Wuhan, China) with a variation of less than 5%. Semi-continuous cultures were used to maintain the pH stability during P. tricornutum growth in the present study, All the cultures were diluted to 1x104 cells mL-1 with fresh medium and pre-acclimated to the desired CO2 level every 24 h to maintain an exponential growth phase and minimize pH fluctuations of the cells. Cultures were harvested after 8 months of semi-continuous incubation. Significant differences between the carbonate systems in different cultures.
2019-11-07 | E-MTAB-8351 | biostudies-arrayexpress
Project description:Modeling guided pathway engineering for isopropanol production in Clostridium sp.
2022-02-15 | MSV000088839 | MassIVE
Project description:Production of biopolymers from renewable carbon sources provides a path towards a circular economy. This review compares several existing and emerging approaches for polyhydroxyalkanoate (PHA) production from soluble organic and gaseous carbon sources and considers technologies based on pure and mixed microbial cultures. While bioplastics are most often produced from soluble sources of organic carbon, the use of carbon dioxide (CO2) as the carbon source for PHA production is emerging as a sustainable approach that combines CO2 sequestration with the production of a value-added product. Techno-economic analysis suggests that the emerging approach of CO2 conversion to carboxylic acids by microbial electrosynthesis followed by microbial PHA production could lead to a novel cost-efficient technology for production of green biopolymers.
| S-EPMC9159792 | biostudies-literature
Project description:Acetate as the dominant fraction of volatile fatty acids (VFAs) is an important intermediate in metabolic pathways of methanogenesis, which could reflect the stability status of anaerobic digestion (AD) process. Bioelectrochemical sensors for environmental or bioprocess monitoring have become increasingly attractive in recent years. Although it was more favorable, several challenges still need to be addressed for acetate detection, including large electrode spacing, low stability, biofouling at the cathode and low detection range. In this study, an innovative biosensor on the basis of a three-chamber microbial electrochemical system was proposed to monitor the acetate during the AD process. In such a system, acetate was first transferred from sample chamber through the anion exchange membrane (AEM) to anode due to the driven force of concentration difference and then oxidized by anodic biofilm as a substrate for the current generation. With such design, the influence of waste properties fluctuation in the cathodic reaction could be avoided. The response of current density to different acetate concentrations was investigated. The selectivity, the influence of the sample temperature and the external resistance were also evaluated. The correlation (R 2 > 0.99) between the current densities and acetate concentrations (up to 160 mM) was established at specific reaction time (from 2 to 5 h). Current densities after 5 h reaction were improving about 20% when the sample temperature was high (e.g., 37 and 55°C). The detection range increased along with the decrease of external resistance. The acetate concentrations of AD effluents as determined by the biosensor where within 24.2% of the ones determined by gas chromatography. Nevertheless, the application of the biosensor for monitoring acetate in environmental samples could still be promising.
| S-EPMC6340975 | biostudies-literature
Project description:Sufficient supply of oxygen is a major bottleneck in industrial biotechnological synthesis. One example is the heterologous production of rhamnolipids using Pseudomonas putida KT2440. Typically, the synthesis is accompanied by strong foam formation in the reactor vessel hampering the process. It is caused by the extensive bubbling needed to sustain the high respirative oxygen demand in the presence of the produced surfactants. One way to reduce the oxygen requirement is to enable the cells to use the anode of a bioelectrochemical system (BES) as an alternative sink for their metabolically derived electrons. We here used a P. putida KT2440 strain that interacts with the anode using mediated extracellular electron transfer via intrinsically produced phenazines, to perform heterologous rhamnolipid production under oxygen limitation. The strain P. putida RL-PCA successfully produced 30.4 ± 4.7 mg/L mono-rhamnolipids together with 11.2 ± 0.8 mg/L of phenazine-1-carboxylic acid (PCA) in 500-mL benchtop BES reactors and 30.5 ± 0.5 mg/L rhamnolipids accompanied by 25.7 ± 8.0 mg/L PCA in electrode containing standard 1-L bioreactors. Hence, this study marks a first proof of concept to produce glycolipid surfactants in oxygen-limited BES with an industrially relevant strain.
| S-EPMC7763313 | biostudies-literature