Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effect of ethanol dosage and upflow velocity on taxonomic profile and metabolic potential in fluidized bed reactor

ABSTRACT: Effect of ethanol dosage and upflow velocity on taxonomic profile and metabolic potential in fluidized bed reactor

PROVIDER: PRJEB33655 | ENA |

REPOSITORIES: ENA

ACCESS DATA

Json Xml

Dataset's files

Source:

			Action	DRS
	ERR3450160_1.fastq.gz	Fastqsanger.gz
	ERR3450160_2.fastq.gz	Fastqsanger.gz
	ERR3450158_1.fastq.gz	Fastqsanger.gz
	ERR3450158_2.fastq.gz	Fastqsanger.gz
	ERR3450159_1.fastq.gz	Fastqsanger.gz

Items per page:

1 - 5 of 6

Similar Datasets

Effect of ethanol dosage and upflow velocity on taxonomic profile and metabolic potential in fluidized bed reactor applied to surfactant removal

Project description:Effect of ethanol dosage and upflow velocity on taxonomic profile and metabolic potential in fluidized bed reactor applied to surfactant removal

| PRJEB33570 | ENA

Fluidized bed reactor treating commercial laundry wastewater

Project description:Fluidized bed reactor treating commercial laundry wastewater Metagenome

| PRJNA430815 | ENA

fluidized bed organisms

Project description:microorganisms obtained from fungal fluidized bed reactor Genome sequencing and assembly

| PRJNA574236 | ENA

Effect of bed characters on the direct synthesis of dimethyldichlorosilane in fluidized bed reactor.

Project description:This paper presents the numerical investigation of the effects of the general bed characteristics such as superficial gas velocities, bed temperature, bed heights and particle size, on the direct synthesis in a 3D fluidized bed reactor. A 3D model for the gas flow, heat transfer, and mass transfer was coupled to the direct synthesis reaction mechanism verified in the literature. The model was verified by comparing the simulated reaction rate and dimethyldichlorosilane (M2) selectivity with the experimental data in the open literature and real production data. Computed results indicate that superficial gas velocities, bed temperature, bed heights, and particle size have vital effect on the reaction rates and/or M2 selectivity.

| S-EPMC4649753 | biostudies-other

Fluidized bed reactors applied to surfactants degradation

Project description:Fluidized bed reactors applied to surfactants degradation Metagenome

| PRJNA1031704 | ENA

Response surface data for sensitivity study of industrial spray injected fluidized bed reactor.

Project description:An industrial fluidized bed reactor was designed to convert an aqueous solid laden stream into a consistent granular product. CFD simulations were run using the MFiX two-fluid model for a fluidizing bed operating at 650?°C. A set of simulations were run over a Latin-hypercube sample of five model parameters - bed particle size, bed particle density, coal particle size, spray feed flow rate, and fluidizing gas flow rate. Data from the simulations were collected on three quantities of interest - bed differential temperature, low solids velocity, and bed void fraction. The data presented here is the full set of response surfaces generated using the process Gaussian response surface model in the Dakota toolkit, as well as the table of data for coefficients of the fitted model. The fits to the five-dimensional Gaussian Process models were 0.7797, 0.8664, and 0.9440 for the temperature, velocity, and solids packing, respectively.

| S-EPMC6197788 | biostudies-literature

Production of bio-oil from Tung seed residues in a fluidized-bed reactor.

Project description:The current paper presents research on bio-oil production from Tung seed residues fed at 500 g/h via fast pyrolysis in a fluidized-bed. The objective was to investigate the influence of temperature on bio-oil production in a pyrolysis process. Three portions Tung residues were studied, Tung seed outer shells (TO), Tung seed inner shells (TI), and pressed residues of oil seeds (RS), all having particle sizes of 0.150-0.500 mm. The process temperatures were 350-500 °C. The physical and chemical properties of pressed residue particles were characterized by ASTM standard methods. Bio-oil component identification was done using GC-MS. Experimentally derived data showed an optimal pyrolysis temperatures for all three types of Tung residues (TO, TI and RS) of 400 °C, yielding respective maximum bio-oil yields of 53.46, 52.81, and 62.85 wt% on a dry basis (db). Apart from having highest bio-oil yield, RS produced bio-oil with the highest carbon content, leading to its greatest lower heating value (LHV), 28.05 MJ/kg (db). The main bio-oil components were acids, nitrogen compounds, and hydrocarbons. Char yield was reduced with increased temperature. Tung seed outer shells produced the highest char level (39.26 wt%) while RS gave highest char quality in term of density and heating value.

| S-EPMC11002048 | biostudies-literature

Microfluidic low-input fluidized-bed enabled ChIP-seq device for automated and parallel analysis of histone modifications

Project description:Genome-wide epigenetic changes such as histone modifications form a critical layer of gene regulations and have been implicated in a number of different disorders such as cancer and inflammation. Progress has made to decrease the input required for gold-standard genome-wide profiling tools like chromatin immunoprecipitation followed by next generation sequencing (i.e. ChIP-seq) to allow scarce primary tissues of specific type from patients and lab animals to be tested. However, there has been very little effort to rapidly increase the throughput of these low-input tools. In this report, we demonstrate LIFE-ChIP-seq (Low-Input Fluidized-bed Enabled Chromatin Immunoprecipitation combined with sequencing), an automated and high-throughput microfluidic platform capable of running multiple sets of ChIP assays in as little as 1 h with as few as 50 cells per assay. Our technology will enable testing of a large number of samples and replicates with low-abundance primary samples in the context of precision medicine.

2018-06-01 | GSE102932 | GEO

Microbiota in fluidized bed membrane bioreactor

Project description:An aerated and fluidized bed membrane bioreactor for effective wastewater treatment with low membrane fouling

| PRJEB13756 | ENA

Continuous reduction of tellurite to recoverable tellurium nanoparticles using an upflow anaerobic sludge bed (UASB) reactor.

Project description:According to the U.S. Department of Energy and the European Union, tellurium is a critical element needed for energy and defense technology. Thus methods are needed to recover tellurium from waste streams. The objectives of this study was to determine the feasibility of utilizing upflow anaerobic sludge bed (UASB) reactors to convert toxic tellurite (TeIV) oxyanions to non-toxic insoluble elemental tellurium (Te0) nanoparticles (NP) that are amendable to separation from aqueous effluents. The reactors were supplied with ethanol as the electron donating substrate to promote the biological reduction of TeIV. One reactor was additionally amended with the redox mediating flavonoid compound, riboflavin (RF), with the goal of enhancing the bioreduction of TeIV. Its performance was compared to a control reactor lacking RF. The continuous formation of Te0 NPs using the UASB reactors was found to be feasible and remarkably improved by the addition of RF. The presence of this flavonoid was previously shown to enhance the conversion rate of TeIV by approximately 11-fold. In this study, we demonstrated that this was associated with the added benefit of reducing the toxic impact of TeIV towards the methanogenic consortium in the UASB and thus enabled a 4.7-fold higher conversion rate of the chemical oxygen demand. Taken as a whole, this work demonstrates the potential of a methanogenic granular sludge to be applied as a bioreactor technology producing recoverable Te0 NPs in a continuous fashion.

| S-EPMC5593269 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data