Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Orthogonal Cu- and Pd-based catalyst systems for the O- and N-arylation of aminophenols.

ABSTRACT: O- or N-arylated aminophenol products constitute a common structural motif in various potentially useful therapeutic agents and/or drug candidates. We have developed a complementary set of Cu- and Pd-based catalyst systems for the selective O- and N-arylation of unprotected aminophenols using aryl halides. Selective O-arylation of 3- and 4-aminophenols is achieved with copper-catalyzed methods employing picolinic acid or CyDMEDA, trans-N,N'-dimethyl-1,2-cyclohexanediamine, respectively, as the ligand. The selective formation of N-arylated products of 3- and 4-aminophenols can be obtained with BrettPhos precatalyst, a biarylmonophosphine-based palladium catalyst. 2-Aminophenol can be selectively N-arylated with CuI, although no system for the selective O-arylation could be found. Coupling partners with diverse electronic properties and a variety of functional groups can be selectively transformed under these conditions.

SUBMITTER: Maiti D

PROVIDER: S-EPMC3130739 | biostudies-literature | 2009 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Orthogonal Cu- and Pd-based catalyst systems for the O- and N-arylation of aminophenols.

Maiti Debabrata D Buchwald Stephen L SL

Journal of the American Chemical Society 20091201 47

O- or N-arylated aminophenol products constitute a common structural motif in various potentially useful therapeutic agents and/or drug candidates. We have developed a complementary set of Cu- and Pd-based catalyst systems for the selective O- and N-arylation of unprotected aminophenols using aryl halides. Selective O-arylation of 3- and 4-aminophenols is achieved with copper-catalyzed methods employing picolinic acid or CyDMEDA, trans-N,N'-dimethyl-1,2-cyclohexanediamine, respectively, as the l ...[more]

PMID: 19899753

Similar Datasets

Orthogonal Pd- and Cu-based catalyst systems for C- and N-arylation of oxindoles.

Project description:In the cross-coupling reactions of unprotected oxindoles with aryl halides, Pd- and Cu-based catalyst systems displayed orthogonal chemoselectivity. A Pd-dialkylbiarylphosphine-based catalyst system chemoselectively arylated oxindole at the 3 position, while arylation occurred exclusively at the nitrogen using a Cu-diamine-based catalyst system. Computational examination of the relevant L1Pd(Ar)(oxindolate) and diamine-Cu(oxindolate) species was performed to gain mechanistic insight into the controlling features of the observed chemoselectivity.

| S-EPMC2587375 | biostudies-literature

Intramolecular arylation of benzimidazoles via Pd(II)/Cu(I) catalyzed cross-dehydrogenative coupling.

Project description:Electron poor benzimidazole substrates were arylated via an intramolecular cross-dehydrogenative coupling (CDC) reaction. These CDC reactions were catalyzed by a Pd(II)/Cu(I) catalyst system, capable of producing moderate yields on a large library of substrates. The substrate scope consisted of tethered arene-benzimidazoles that upon coupling, produced a fused polycyclic motif.

| S-EPMC3993984 | biostudies-literature

Pd-catalyzed N-arylation of secondary acyclic amides: catalyst development, scope, and computational study.

Project description:We report the efficient N-arylation of acyclic secondary amides and related nucleophiles with aryl nonaflates, triflates, and chlorides. This method allows for easy variation of the aromatic component in tertiary aryl amides. A new biaryl phosphine with P-bound 3,5-(bis)trifluoromethylphenyl groups was found to be uniquely effective for this amidation. The critical aspects of the ligand were explored through synthetic, mechanistic, and computational studies. Systematic variation of the ligand revealed the importance of (1) a methoxy group on the aromatic carbon of the "top ring" ortho to the phosphorus and (2) two highly electron-withdrawing P-bound 3,5-(bis)trifluoromethylphenyl groups. Computational studies suggest the electron-deficient nature of the ligand is important in facilitating amide binding to the LPd(II)(Ph)(X) intermediate.

| S-EPMC2805443 | biostudies-literature

Catalyst System for Hydrogenation Catalysis Based on Multiarm Hyperbranched Polymer Templated Metal (Au, Pt, Pd, Cu) Nanoparticles.

Project description:With a hyperbranched poly(amidoamine) core and many water-soluble poly(ethylene glycol) monomethyl ether arms connected by pH-sensitive acylhydrazone bonds, multiarm hyperbranched polymer was used as nanoreactor and reductant to prepare metal nanoparticles endowed with intelligence and biocompatibility. The multiarm hyperbranched polymer encapsulated nanoparticles (NPs) showed excellent catalytic activity for hydrogenation, thus an excellent catalyst system for hydrogenation was established. The rate constants could reach as high as 3.48 L·s-1·m-2, which can be attributed to the lack of surface passivation afforded by the multiarm hyperbranched polymer.

| S-EPMC6418630 | biostudies-literature

Visible-light-driven Photocatalytic N-arylation of Imidazole Derivatives and Arylboronic Acids on Cu/graphene catalyst.

Project description:N-aryl imidazoles play an important role as structural and functional units in many natural products and biologically active compounds. Herein, we report a photocatalytic route for the C-N cross-coupling reactions over a Cu/graphene catalyst, which can effectively catalyze N-arylation of imidazole and phenylboronic acid, and achieve a turnover frequency of 25.4 h(-1) at 25°C and the irradiation of visible light. The enhanced catalytic activity of the Cu/graphene under the light irradiation results from the localized surface plasmon resonance of copper nanoparticles. The Cu/graphene photocatalyst has a general applicability for photocatalytic C-N, C-O and C-S cross-coupling of arylboronic acids with imidazoles, phenols and thiophenols. This study provides a green photocatalytic route for the production of N-aryl imidazoles.

| S-EPMC4648406 | biostudies-other

A Cu-Pd single-atom alloy catalyst for highly efficient NO reduction.

Project description:A series of Cu-Pd alloy nanoparticles supported on Al2O3 were prepared and tested as catalysts for deNO x reactions. XRD, HAADF-STEM, XAFS, and FT-IR analyses revealed that a single-atom alloy structure was formed when the Cu/Pd ratio was 5, where Pd atoms were well isolated by Cu atoms. Compared with Pd/Al2O3, Cu5Pd/Al2O3 exhibited outstanding catalytic activity and N2 selectivity in the reduction of NO by CO: for the first time, the complete conversion of NO to N2 was achieved even at 175 °C, with long-term stability for at least 30 h. High catalytic performance was also obtained in the presence of O2 and C3H6 (model exhaust gas), where a 90% decrease in Pd use was achieved with minimum evolution of N2O. Kinetic and DFT studies demonstrated that N-O bond breaking of the (NO)2 dimer was the rate-determining step and was kinetically promoted by the isolated Pd.

| S-EPMC7006621 | biostudies-literature

Cu(I)- and Pd(0)-Catalyzed Arylation of Oxadiamines with Fluorinated Halogenobenzenes: Comparison of Efficiency.

Project description:The comparison of the possibilities of Pd- and Cu-catalyzed amination reactions using fluorine-containing aryl bromides and iodides with oxadiamines to produce their N,N'-diaryl derivatives was carried out. The dependence of the reactivity of the aryl halides on the nature of the substituents and halogen atoms as well as on the structure of oxadiamines was investigated. It was found that the copper-catalyzed reactions were somewhat comparable with the palladium-mediated processes in the majority of cases, especially in the reactions with para-fluorine- and para-(trifluoromethyl)-substituted aryl halides, although the necessity to use aryl iodides in the Cu(I)-catalyzed amination was obvious. Pd catalysis was found inevitable for the successful amination of more sterically hindered ortho-(trifluoromethyl)aryl bromides.

| S-EPMC7179129 | biostudies-literature

Cu@Pd/C with Controllable Pd Dispersion as a Highly Efficient Catalyst for Hydrogen Evolution from Ammonia Borane.

Project description:A series of Cu@Pd/C with different Pd contents was prepared using the galvanic reduction method to disperse Pd on the surface of Cu nanoparticles on Cu/C. The dispersion of Pd was regulated by the Cu(I) on the surface, which was introduced by pulse oxidation. The Cu2O did not react during the galvanic reduction process and restricted the Pd atoms to a specific area. The pulse oxidation method was demonstrated to be an effective process to control the oxidization degree of Cu on Cu/C and then to govern the dispersion of Pd. The catalysts were characterized by transmission electron microscopy (TEM), high-resolution transmission electron microscope (HRTEM), high angular annular dark field scanning TEM (HAADF-STEM), energy-dispersive spectroscopy (EDS) mapping, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), auger electron spectroscopy (AES), and inductively coupled plasma optical emission spectrometer (ICP-OES), which were used to catalyze the hydrogen evolution from ammonia borane. The Cu@Pd/C had much higher activity than the PdCu/C, which was prepared by the impregnation method. The TOF increased as the Cu2O in Cu/C used for the preparation of Cu@Pd/C increased, and the maximum TOF was 465 molH2 min-1 molPd-1 at 298 K on Cu@Pd0.5/C-640 (0.5 wt % of Pd, 640 mL of air was pulsed during the preparation of Cu/C-640). The activity could be maintained in five continuous processes, showing the strong stability of the catalysts.

| S-EPMC7558311 | biostudies-literature

ppm Pd-catalyzed, Cu-free Sonogashira couplings in water using commercially available catalyst precursors.

Project description:A new catalyst that derives from commercially available precursors for copper-free, Pd-catalyzed Sonogashira reactions at the sustainable ppm level of precious metal palladium under mild aqueous micellar conditions has been developed. Both the palladium pre-catalyst and ligand are commercially available, bench stable, and highly cost-effective. The catalyst is applicable to both aryl- and heteroaryl-bromides as educts. A wide range of functional groups are tolerated and the aqueous reaction medium can be recycled. An application to a key intermediate associated with an active pharmaceutical ingredient (ponatinib) is discussed.

| S-EPMC6438147 | biostudies-literature

Arylation of Azaarylmethylamines with Aryl Chlorides and a NiBr2/NIXANTPHOS-based Catalyst.

Project description:A nickel-catalyzed coupling of azaarylmethylamines with aryl chlorides has been achieved. NIXANTPHOS together with low cost NiBr2 was successfully developed and optimized to exhibit high reactivity at 2.5 mol % loading. Under optimized reaction conditions, aryl(azaaryl)methylamine products were afforded in good to excellent yields (22 examples, up to 98% yield).

| S-EPMC5844573 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data