Dataset Information

Availability of lignocellulose from forestry waste for use as a biofuel in China.

ABSTRACT: Biomass is a very important renewable energy and plays an important role in the energy structure of China. Here, the role of forestry waste in producing energy in China was analyzed and the availability of forestry waste for biofuel production, theoretically collectable amounts of forest biomass, and density of forestry waste were assessed. Agricultural and forestry waste are important biomass resources. The potential for using forestry waste as a low cost substrate for producing fuel ethanol using existing forestry resources and techniques was analyzed, and the feasibility of producing fuel ethanol in different Chinese provinces was assessed using the specific situation for each province. The results showed that 1081.73?×?106 t of forestry waste could be produced in China, and 270.43?×?106 t (25% of the amount that could be collected) could be used to produce fuel ethanol. Assuming 10 t of sawdust could be converted into 1 t of ethanol, 27?×?106 t of ethanol could be produced from forestry waste. Different provinces have different potentials for producing ethanol from forestry waste, Guangdong Province, Guangxi Province, Sichuan Province, and Yunnan Province having higher potentials than the other provinces. It was predicted that 4478?×?106 t of fuel ethanol could be produced from woodcraft waste by 2020, and the provinces with the most potential were found to be Fujian Province, Heilongjiang Province, Jilin Province, Shanxi Province, Sichuan Province, Xinjiang Province, and Yunnan Province. Using forestry waste to produce ethanol could alleviate the energy shortage in China.

SUBMITTER: Xie H

PROVIDER: S-EPMC5928010 | biostudies-literature | 2018 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Availability of lignocellulose from forestry waste for use as a biofuel in China.

Xie Hui H Zhang Dong D Mao Guotao G Wang Fengqin F Song Andong A

3 Biotech 20180430 5

Biomass is a very important renewable energy and plays an important role in the energy structure of China. Here, the role of forestry waste in producing energy in China was analyzed and the availability of forestry waste for biofuel production, theoretically collectable amounts of forest biomass, and density of forestry waste were assessed. Agricultural and forestry waste are important biomass resources. The potential for using forestry waste as a low cost substrate for producing fuel ethanol us ...[more]

PMID: 29725573

Similar Datasets

Project description:BACKGROUND:Worldwide 3.4 billion tonnes of municipal solid waste (MSW) will be produced annually by 2050, however, current approaches to MSW management predominantly involve unsustainable practices like landfilling and incineration. The organic fraction of MSW (OMSW) typically comprises ~ 50% lignocellulose-rich material but is underexplored as a biomanufacturing feedstock due to its highly inconsistent and heterogeneous composition. This study sought to overcome the limitations associated with studying MSW-derived feedstocks by using OMSW produced from a realistic and reproducible MSW mixture on a commercial autoclave system. The resulting OMSW fibre was enzymatically hydrolysed and used to screen diverse microorganisms of biotechnological interest to identify robust species capable of fermenting this complex feedstock. RESULTS:The autoclave pre-treated OMSW fibre contained a polysaccharide fraction comprising 38% cellulose and 4% hemicellulose. Enzymatic hydrolysate of OMSW fibre was high in D-glucose (5.5% w/v) and D-xylose (1.8%w/v) but deficient in nitrogen and phosphate. Although relatively low levels of levulinic acid (30 mM) and vanillin (2 mM) were detected and furfural and 5-hydroxymethylfurfural were absent, the hydrolysate contained an abundance of potentially toxic metals (0.6% w/v). Hydrolysate supplemented with 1% yeast extract to alleviate nutrient limitation was used in a substrate-oriented shake-flask screen with eight biotechnologically useful microorganisms (Clostridium saccharoperbutylacetonicum, Escherichia coli, Geobacillus thermoglucosidasius, Pseudomonas putida, Rhodococcus opacus, Saccharomyces cerevisiae, Schizosaccharomyces pombe and Zymomonas mobilis). Each species' growth and productivity were characterised and three species were identified that robustly and efficiently fermented OMSW fibre hydrolysate without significant substrate inhibition: Z. mobilis, S. cerevisiae and R. opacus, respectively produced product to 69%, 70% and 72% of the maximum theoretical fermentation yield and could theoretically produce 136 kg and 139 kg of ethanol and 91 kg of triacylglycerol (TAG) per tonne of OMSW. CONCLUSIONS:Developing an integrated biorefinery around MSW has the potential to significantly alleviate the environmental burden of current waste management practices. Substrate-oriented screening of a representative and reproducible OMSW-derived fibre identified microorganisms intrinsically suited to growth on OMSW hydrolysates. These species are promising candidates for developing an MSW biorefining platform and provide a foundation for future studies aiming to valorise this underexplored feedstock.

Project description:Food waste is a promising resource for the production of fuels and chemicals. However, increasing plastic contamination has a large impact on the efficiency of conversion for the more established biological routes such as anaerobic digestion or fermentation. Here, we assessed a novel route through the hydrothermal liquefaction (HTL) of a model waste (pistachio hulls) and polypropylene (PP). Pure pistachio hulls gave a biocrude yield of 34% (w/w), though this reduced to 16% (w/w) on the addition of 50% PP in the mixture. The crude composition was a complex blend of phenolics, alkanes, carboxylic acids, and other oxygenates, which did not change substantially on the addition of PP. Pure PP does not breakdown at all under HTL conditions (350 °C, 15% solids loading), and even with biomass, there is only a small synergistic effect resulting in a conversion of 19% PP. This conversion was enhanced through using typical HTL catalysts including Fe, FeSO4·7H2O, MgSO4·H2O, ZnSO4·7H2O, ZSM-5, aluminosilicate, Y-zeolite, and Na2CO3; the conversion of PP reached a maximum of 38% with the aluminosilicate, for example. However, the PP almost exclusively broke down into a solid-phase product, with no enhancement of the biocrude fraction. The mechanism was explored, and with the addition of the radical scavenger butylated hydroxytoluene (BHT), the conversion of plastic reduced substantially, demonstrating that radical formation is necessary. As a result, the plastic conversion was enhanced to over 50% through the addition of the co-solvent and hydrogen donor, formic acid, and the radical donor, hydrogen peroxide. The addition of formic acid also changed the crude composition, including more carboxylic acids and oxygenated species than the conversion of the biomass alone; however, the majority of the carbon distributed to the volatile organic gas fraction producing an array of short-chain volatile hydrocarbons, which potentially could be repolymerized as a polyolefin or combined with the biocrude for further processing. Catalytic HTL was therefore shown to be a promising method for the valorization of polyolefins with biomass under typical HTL conditions.

Project description:Environmental or 'ecological' footprints have been widely used in recent years as indicators of resource consumption and waste absorption presented in terms of biologically productive land area [in global hectares (gha)] required per capita with prevailing technology. In contrast, 'carbon footprints' are the amount of carbon (or carbon dioxide equivalent) emissions for such activities in units of mass or weight (like kilograms per functional unit), but can be translated into a component of the environmental footprint (on a gha basis). The carbon and environmental footprints associated with the world production of liquid biofuels have been computed for the period 2010-2050. Estimates of future global biofuel production were adopted from the 2011 International Energy Agency (IEA) 'technology roadmap' for transport biofuels. This suggests that, although first generation biofuels will dominate the market up to 2020, advanced or second generation biofuels might constitute some 75% of biofuel production by 2050. The overall environmental footprint was estimated to be 0.29 billion (bn) gha in 2010 and is likely to grow to around 2.57 bn gha by 2050. It was then disaggregated into various components: bioproductive land, built land, carbon emissions, embodied energy, materials and waste, transport, and water consumption. This component-based approach has enabled the examination of the Manufactured and Natural Capital elements of the 'four capitals' model of sustainability quite broadly, along with specific issues (such as the linkages associated with the so-called energy-land-water nexus). Bioproductive land use was found to exhibit the largest footprint component (a 48% share in 2050), followed by the carbon footprint (23%), embodied energy (16%), and then the water footprint (9%). Footprint components related to built land, transport and waste arisings were all found to account for an insignificant proportion to the overall environmental footprint, together amounting to only about 2.

Dataset Information

Availability of lignocellulose from forestry waste for use as a biofuel in China.

Publications

Availability of lignocellulose from forestry waste for use as a biofuel in China.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets