Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Colloidal Synthesis of Bulk-Bandgap Lead Selenide Nanocrystals.

ABSTRACT: Lead selenide quantum dots (QDs) are low-bandgap IV-VI semiconducting nanomaterials that have been studied for a variety of applications. Their preparation using colloidal methods can create small spherical to larger cubic nanocrystals, with an upper limit of ~17 nm reported to date. Here we describe methods for preparing cubic PbSe nanocrystals over a 20-40 nm size range using a twostep procedure. Specifically, ~10 nm PbSe QDs are generated using the rapid injection method, the products from which are overcoated with additional lead and selenium precursors. The use of two lead reagents were studied; lead oleate resulted in a maximum of 20 nm cubes, while more reactive lead hexyldecanoate resulted in much larger nanomaterials with bulk bandgaps. However, PbSe samples prepared with lead hexyldecanoate also contained agglomerates. Special care must be taken when characterizing larger strained nanomaterials with X-ray powder diffraction, for which the Scherrer equation is inadequate. A more rigorous approach using the Williamson-Hall method provides characterizations that are consistent with electron microscopy analysis.

SUBMITTER: Abeywickrama TM

PROVIDER: S-EPMC6261983 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Highly Luminescent, Size- and Shape-Tunable Copper Indium Selenide Based Colloidal Nanocrystals.

Project description:We report a simple, high-yield colloidal synthesis of copper indium selenide nanocrystals (CISe NCs) based on a silylamide-promoted approach. The silylamide anions increase the nucleation rate, which results in small-sized NCs exhibiting high luminescence and constant NC stoichiometry and crystal structure regardless of the NC size and shape. In particular, by systematically varying synthesis time and temperature, we show that the size of the CISe NCs can be precisely controlled to be between 2.7 and 7.9 nm with size distributions down to 9-10%. By introducing a specific concentration of silylamide-anions in the reaction mixture, the shape of CISe NCs can be preselected to be either spherical or tetrahedral. Optical properties of these CISe NCs span from the visible to near-infrared region with peak luminescence wavelengths of 700 to 1200 nm. The luminescence efficiency improves from 10 to 15% to record values of 50-60% by overcoating as-prepared CISe NCs with ZnSe or ZnS shells, highlighting their potential for applications such as biolabeling and solid state lighting.

| S-EPMC3982935 | biostudies-literature

Benzoyl Halides as Alternative Precursors for the Colloidal Synthesis of Lead-Based Halide Perovskite Nanocrystals.

Project description:We propose here a new colloidal approach for the synthesis of both all-inorganic and hybrid organic-inorganic lead halide perovskite nanocrystals (NCs). The main limitation of the protocols that are currently in use, such as the hot injection and the ligand-assisted reprecipitation routes, is that they employ PbX2 (X = Cl, Br, or I) salts as both lead and halide precursors. This imposes restrictions on being able to precisely tune the amount of reaction species and, consequently, on being able to regulate the composition of the final NCs. In order to overcome this issue, we show here that benzoyl halides can be efficiently used as halide sources to be injected in a solution of metal cations (mainly in the form of metal carboxylates) for the synthesis of APbX3 NCs (in which A = Cs+, CH3NH3+, or CH(NH2)2+). In this way, it is possible to independently tune the amount of both cations and halide precursors in the synthesis. The APbX3 NCs that were prepared with our protocol show excellent optical properties, such as high photoluminescence quantum yields, low amplified spontaneous emission thresholds, and enhanced stability in air. It is noteworthy that CsPbI3 NCs, which crystallize in the cubic ? phase, are stable in air for weeks without any postsynthesis treatment. The improved properties of our CsPbX3 perovskite NCs can be ascribed to the formation of lead halide terminated surfaces, in which Cs cations are replaced by alkylammonium ions.

| S-EPMC5908184 | biostudies-literature

Low-Cost Synthesis of Highly Luminescent Colloidal Lead Halide Perovskite Nanocrystals by Wet Ball Milling.

Project description:Lead halide perovskites of APbX3 type [A = Cs, formamidinium (FA), methylammonium; X = Br, I] in the form of ligand-capped colloidal nanocrystals (NCs) are widely studied as versatile photonic sources. FAPbBr3 and CsPbBr3 NCs have become promising as spectrally narrow green primary emitters in backlighting of liquid-crystal displays (peak at 520-530 nm, full width at half-maximum of 22-30 nm). Herein, we report that wet ball milling of bulk APbBr3 (A = Cs, FA) mixed with solvents and capping ligands yields green luminescent colloidal NCs with a high overall reaction yield and optoelectronic quality on par with that of NCs of the same composition obtained by hot-injection method. We emphasize the superiority of oleylammonium bromide as a capping ligand used for this procedure over the standard oleic acid and oleylamine. We also show a mechanically induced anion-exchange reaction for the formation of orange-emissive CsPb(Br/I)3 NCs.

| S-EPMC5999230 | biostudies-literature

Colloidal Synthesis of CsX Nanocrystals (X = Cl, Br, I).

Project description:A facile colloidal synthesis of highly ionic cesium halide nanocrystals is reported. Colloidal nanocrystals of CsI, CsCl and CsBr with unprecedentedly small dimensions are obtained using oleylammonium halides and cesium oleate as precursors. The ease and adaptability of our method enables its universalization for the formation of other highly ionic nanocrystals.

| S-EPMC6070971 | biostudies-literature

Copper selenide nanocrystals for photothermal therapy.

Project description:Ligand-stabilized copper selenide (Cu(2-x)Se) nanocrystals, approximately 16 nm in diameter, were synthesized by a colloidal hot injection method and coated with amphiphilic polymer. The nanocrystals readily disperse in water and exhibit strong near-infrared (NIR) optical absorption with a high molar extinction coefficient of 7.7 × 10(7) cm(-1) M(-1) at 980 nm. When excited with 800 nm light, the Cu(2-x)Se nanocrystals produce significant photothermal heating with a photothermal transduction efficiency of 22%, comparable to nanorods and nanoshells of gold (Au). In vitro photothermal heating of Cu(2-x)Se nanocrystals in the presence of human colorectal cancer cell (HCT-116) led to cell destruction after 5 min of laser irradiation at 33 W/cm(2), demonstrating the viabilitiy of Cu(2-x)Se nanocrystals for photothermal therapy applications.

| S-EPMC3111000 | biostudies-literature

Colloidal Synthesis of Nickel Arsenide Nanocrystals for Electrochemical Water Splitting.

Project description:We report a detailed study on the first colloidal synthesis of NiAs nanocrystals. By optimizing the synthesis parameters, we were able to obtain trioctylphosphine-capped NiAs nanoplatelets with an average diameter of ∼10 nm and a thickness of ca. 4 nm. We then studied the performance of such NiAs nanocrystals as electrocatalysts for electrochemical water splitting reactions, namely, acidic hydrogen evolution reaction (HER) and alkaline oxygen evolution reaction (OER). These nanocrystals were found to be the most HER active ones among the transition metal arsenides reported to date despite exhibiting less than 40 h of stability under benchmark operative conditions (i.e., -10 mA cmgeo -2). When tested as alkaline OER electrocatalysts, our NiAs nanocrystals behaved as a pre-catalyst and transformed superficially into an active Ni-oxy/hydroxide. As a result, NiAs nanocrystals featured an OER activity higher than that of benchmark Ni0 nanocrystals. Noticeably, the OER performance, in terms of , was retained for up to 60 h of continuous operation. The present study highlights how transition metal arsenides, whose structural features could be successfully controlled through a proper tuning of the synthetic parameters, might represent an emerging class of materials for electrocatalytic applications.

| S-EPMC9832430 | biostudies-literature

Diffusion dynamics controlled colloidal synthesis of highly monodisperse InAs nanocrystals.

Project description:Highly monodisperse colloidal InAs quantum dots (QDs) with superior optoelectronic properties are promising candidates for various applications, including infrared photodetectors and photovoltaics. Recently, a synthetic process involving continuous injection has been introduced to synthesize uniformly sized InAs QDs. Still, synthetic efforts to increase the particle size of over 5 nm often suffer from growth suppression. Secondary nucleation or interparticle ripening during the growth accompanies the inhomogeneity in size as well. In this study, we propose a growth model for the continuous synthetic processing of colloidal InAs QDs based on molecular diffusion. The experimentally validated model demonstrates how precursor solution injection reduces monomer flux, limiting particle growth during synthesis. As predicted by our model, we control the diffusion dynamics by tuning reaction volume, precursor concentration, and injection rate of precursor. Through diffusion-dynamics-control in the continuous process, we synthesize the InAs QDs with a size over 9.0-nm (1Smax of 1600 nm) with a narrow size distribution (12.2%). Diffusion-dynamics-controlled synthesis presented in this study effectively manages the monomer flux and thus overcome monomer-reactivity-originating size limit of nanocrystal growth in solution.

| S-EPMC8140152 | biostudies-literature

Nanoscale determination of the mass enhancement factor in the lightly doped bulk insulator lead selenide.

Project description:Bismuth chalcogenides and lead telluride/selenide alloys exhibit exceptional thermoelectric properties that could be harnessed for power generation and device applications. Since phonons play a significant role in achieving these desired properties, quantifying the interaction between phonons and electrons, which is encoded in the Eliashberg function of a material, is of immense importance. However, its precise extraction has in part been limited due to the lack of local experimental probes. Here we construct a method to directly extract the Eliashberg function using Landau level spectroscopy, and demonstrate its applicability to lightly doped thermoelectric bulk insulator PbSe. In addition to its high energy resolution only limited by thermal broadening, this novel experimental method could be used to detect variations in mass enhancement factor at the nanoscale level. This opens up a new pathway for investigating the local effects of doping and strain on the mass enhancement factor.

| S-EPMC4389230 | biostudies-other

<i>N</i>-Methylformamide as a Source of Methylammonium Ions in the Synthesis of Lead Halide Perovskite Nanocrystals and Bulk Crystals.

Project description:We report chemical routes for the synthesis of both nanocrystals and bulk crystals of methylammonium (MA) lead halide perovskites employing N-methylformamide (NMF) as a source of MA ions. Colloidal nanocrystals were prepared by a transamidation reaction between NMF and an alkyl amine (oleylamine). The nanocrystals showed photoluminescence quantum yields reaching 74% for MAPbBr3 and 60% for MAPbI3. Bulk crystals were grown at room temperature, with no need for an antisolvent, by the acid hydrolysis of NMF. Important advantages of using NMF instead of MA salts are that the syntheses involve fewer steps and less toxic and less expensive chemicals.

| S-EPMC5210176 | biostudies-literature

Colloidal Bismuth Chalcohalide Nanocrystals.

Project description:Here we present a colloidal approach to synthesize bismuth chalcohalide nanocrystals (BiEX NCs, in which E=S, Se and X=Cl, Br, I). Our method yields orthorhombic elongated BiEX NCs, with BiSCl crystallizing in a previously unknown polymorph. The BiEX NCs display a composition-dependent band gap spanning the visible spectral range and absorption coefficients exceeding 105 cm-1 . The BiEX NCs show chemical stability at standard laboratory conditions and form colloidal inks in different solvents. These features enable the solution processing of the NCs into robust solid films yielding stable photoelectrochemical current densities under solar-simulated irradiation. Overall, our versatile synthetic protocol may prove valuable in accessing colloidal metal chalcohalide nanomaterials at large and contributes to establish metal chalcohalides as a promising complement to metal chalcogenides and halides for applied nanotechnology.

| S-EPMC9311208 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data