Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Cycling-Induced Capacity Increase of Graphene Aerogel/ZnO Nanomembrane Composite Anode Fabricated by Atomic Layer Deposition.

ABSTRACT: Zinc oxide (ZnO) nanomembranes/graphene aerogel (GAZ) composites were successfully fabricated via atomic layer deposition (ALD). The composition of GAZ composites can be controlled by changing the number of ALD cycles. Experimental results demonstrated that the anode made from GAZ composite with ZnO nanomembrane of 100 ALD cycles exhibited highest specific capacity and best rate performance. A capacity increase of more than 2 times during the first 500?cycles was observed, and a highest capacity of 1200?mAh g-1 at current density of 1000?mA?g-1 was observed after 500?cycles. On the basis of detailed electrochemical investigations, we ascribe the remarkable cycling-induced capacity increase to the alloying process accompanied by the formation of a polymer layer resulting from kinetically activated electrolyte degradation at low voltage regions.

SUBMITTER: Wang D

PROVIDER: S-EPMC6395466 | biostudies-literature | 2019 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Cycling-Induced Capacity Increase of Graphene Aerogel/ZnO Nanomembrane Composite Anode Fabricated by Atomic Layer Deposition.

Wang Dingrun D Li Yalan Y Zhao Yuting Y Guo Qinglei Q Yang Siwei S Ding Guqiao G Mei YongFeng Y Huang Gaoshan G

Nanoscale research letters 20190228 1

Zinc oxide (ZnO) nanomembranes/graphene aerogel (GAZ) composites were successfully fabricated via atomic layer deposition (ALD). The composition of GAZ composites can be controlled by changing the number of ALD cycles. Experimental results demonstrated that the anode made from GAZ composite with ZnO nanomembrane of 100 ALD cycles exhibited highest specific capacity and best rate performance. A capacity increase of more than 2 times during the first 500 cycles was observed, and a highest capacity ...[more]

PMID: 30820685

Similar Datasets

Atomic layer deposition of ZnO/TiO2 nanolaminates as ultra-long life anode material for lithium-ion batteries.

Project description:In this work, we designed ZnO/TiO2 nanolaminates by atomic layer deposition (ALD) as anode material for lithium ion batteries. ZnO/TiO2 nanolaminates were fabricated on copper foil by depositing unit of 26 cycles ZnO/26 cycles TiO2 repeatedly using ALD. ZnO/TiO2 nanolaminates are much more stable than pristine ZnO films during electrochemical cycling process. Therefore, ZnO/TiO2 nanolaminates exhibit excellent lithium storage performance with an improved cycling performance and superior rate capability compared to pristine ZnO films. Moreover, coulombic efficiency (CE) of ZnO/TiO2 nanolaminates is above 99%, which is much higher than the value of pristine ZnO films. Excellent ultralong-life performance is gained for ZnO/TiO2 nanolaminates, retaining a reversible capacity of ~667 mAh g-1 within cut-off voltage of 0.05-2.5 V after 1200 cycles of charge-discharge at 500 mA g-1. Constructing nanolaminates structures via ALD might open up new opportunities for improving the performance of anode materials with large volume expansion in lithium ion batteries.

| S-EPMC6687889 | biostudies-literature

Fermi Level Tuning of ZnO Films Through Supercycled Atomic Layer Deposition.

Project description:A novel supercycled atomic layer deposition (ALD) process which combines thermal ALD process with in situ O2 plasma treatment is presented in this work to deposit ZnO thin films with highly tunable electrical properties. Both O2 plasma time and the number of thermal ALD cycles in a supercycle can be adjusted to achieve fine tuning of film resistivity and carrier concentration up to six orders of magnitude without extrinsic doping. The concentration of hydrogen defects are believed to play a major role in adjusting the electrical properties of ZnO films. Kelvin probe force microscopy results evidently show the shift of Fermi level in different ZnO films and are well associated with the changing of carrier concentration. This reliable and robust technique reported here clearly points towards the capability of using this method to produce ZnO films with controlled properties in different applications.

| S-EPMC5605484 | biostudies-literature

Characterization of Sn4P3-Carbon Composite Films for Lithium-Ion Battery Anode Fabricated by Aerosol Deposition.

Project description:We fabricated tin phosphide-carbon (Sn4P3/C) composite film by aerosol deposition (AD) and investigated its electrochemical performance for a lithium-ion battery anode. Sn4P3/C composite powders prepared by a ball milling was used as raw material and deposited onto a stainless steel substrate to form the composite film via impact consolidation. The Sn4P3/C composite film fabricated by AD showed much better electrochemical performance than the Sn4P3 film without complexing carbon. Although both films showed initial discharge (Li+ extraction) capacities of approximately 1000 mAh g-1, Sn4P3/C films retained higher reversible capacity above 700 mAh g-1 after 100 cycles of charge and discharge processes while the capacity of Sn4P3 film rapidly degraded with cycling. In addition, by controlling the potential window in galvanostatic testing, Sn4P3/C composite film retained the reversible capacity of 380 mAh g-1 even after 400 cycles. The complexed carbon works not only as a buffer to suppress the collapse of electrodes by large volume change of Sn4P3 in charge and discharge reactions but also as an electronic conduction path among the atomized active material particles in the film.

| S-EPMC6669548 | biostudies-literature

Nanoscale Au-ZnO Heterostructure Developed by Atomic Layer Deposition Towards Amperometric H2O2 Detection.

Project description:Nanoscale Au-ZnO heterostructures were fabricated on 4-in. SiO2/Si wafers by the atomic layer deposition (ALD) technique. Developed Au-ZnO heterostructures after post-deposition annealing at 250 °C were tested for amperometric hydrogen peroxide (H2O2) detection. The surface morphology and nanostructure of Au-ZnO heterostructures were examined by field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), etc. Additionally, the electrochemical behavior of Au-ZnO heterostructures towards H2O2 sensing under various conditions is assessed by chronoamperometry and electrochemical impedance spectroscopy (EIS). The results showed that ALD-fabricated Au-ZnO heterostructures exhibited one of the highest sensitivities of 0.53 μA μM-1 cm-2, the widest linear H2O2 detection range of 1.0 μM-120 mM, a low limit of detection (LOD) of 0.78 μM, excellent selectivity under the normal operation conditions, and great long-term stability. Utilization of the ALD deposition method opens up a unique opportunity for the improvement of the various capabilities of the devices based on Au-ZnO heterostructures for amperometric detection of different chemicals.

| S-EPMC7026348 | biostudies-literature

Photocatalytic and Gas Sensitive Multiwalled Carbon Nanotube/TiO2-ZnO and ZnO-TiO2 Composites Prepared by Atomic Layer Deposition.

Project description:TiO2 and ZnO single and multilayers were deposited on hydroxyl functionalized multi-walled carbon nanotubes using atomic layer deposition. The bare carbon nanotubes and the resulting heterostructures were characterized by TG/DTA, Raman, XRD, SEM-EDX, XPS, TEM-EELS-SAED and low temperature nitrogen adsorption techniques, and their photocatalytic and gas sensing activities were also studied. The carbon nanotubes (CNTs) were uniformly covered with anatase TiO2 and wurtzite ZnO layers and with their combinations. In the photocatalytic degradation of methyl orange, the most beneficial structures are those where ZnO is the external layer, both in the case of single and double oxide layer covered CNTs (CNT-ZnO and CNT-TiO2-ZnO). The samples with multilayer oxides (CNT-ZnO-TiO2 and CNT-TiO2-ZnO) have lower catalytic activity due to their larger average densities, and consequently lower surface areas, compared to single oxide layer coated CNTs (CNT-ZnO and CNT-TiO2). In contrast, in gas sensing it is advantageous to have TiO2 as the outer layer. Since ZnO has higher conductivity, its gas sensing signals are lower when reacting with NH3 gas. The double oxide layer samples have higher resistivity, and hence a larger gas sensing response than their single oxide layer counterparts.

| S-EPMC7075193 | biostudies-literature

Photocatalytic hollow TiO2 and ZnO nanospheres prepared by atomic layer deposition.

Project description:Carbon nanospheres (CNSs) were prepared by hydrothermal synthesis, and coated with TiO2 and ZnO nanofilms by atomic layer deposition. Subsequently, through burning out the carbon core templates hollow metal oxide nanospheres were obtained. The substrates, the carbon-metal oxide composites and the hollow nanospheres were characterized with TG/DTA-MS, FTIR, Raman, XRD, SEM-EDX, TEM-SAED and their photocatalytic activity was also investigated. The results indicate that CNSs are not beneficial for photocatalysis, but the crystalline hollow metal oxide nanospheres have considerable photocatalytic activity.

| S-EPMC5489517 | biostudies-literature

Evolution of microstructure and related optical properties of ZnO grown by atomic layer deposition.

Project description:A study of transmittance and photoluminescence spectra on the growth of oxygen-rich ultra-thin ZnO films prepared by atomic layer deposition is reported. The structural transition from an amorphous to a polycrystalline state is observed upon increasing the thickness. The unusual behavior of the energy gap with thickness reflected by optical properties is attributed to the improvement of the crystalline structure resulting from a decreasing concentration of point defects at the growth of grains. The spectra of UV and visible photoluminescence emissions correspond to transitions near the band-edge and defect-related transitions. Additional emissions were observed from band-tail states near the edge. A high oxygen ratio and variable optical properties could be attractive for an application of atomic layer deposition (ALD) deposited ultrathin ZnO films in optical sensors and biosensors.

| S-EPMC3817613 | biostudies-literature

Particle atomic layer deposition.

Project description:The functionalization of fine primary particles by atomic layer deposition (particle ALD) provides for nearly perfect nanothick films to be deposited conformally on both external and internal particle surfaces, including nanoparticle surfaces. Film thickness is easily controlled from several angstroms to nanometers by the number of self-limiting surface reactions that are carried out sequentially. Films can be continuous or semi-continuous. This review starts with a short early history of particle ALD. The discussion includes agitated reactor processing, both atomic and molecular layer deposition (MLD), coating of both inorganic and polymer particles, nanoparticles, and nanotubes. A number of applications are presented, and a path forward, including likely near-term commercial products, is given.

| S-EPMC6320374 | biostudies-literature

Atomic Layer Deposition of ZnO on Mesoporous Silica: Insights into Growth Behavior of ZnO via In-Situ Thermogravimetric Analysis.

Project description:ZnO is a remarkable material with many applications in electronics and catalysis. Atomic layer deposition (ALD) of ZnO on flat substrates is an industrially applied and well-known process. Various studies describe the growth of ZnO layers on flat substrates. However, the growth characteristics and reaction mechanisms of atomic layer deposition of ZnO on mesoporous powders have not been well studied. This study investigates the ZnO ALD process based on diethylzinc (DEZn) and water with silica powder as substrate. In-situ thermogravimetric analysis gives direct access to the growth rates and reaction mechanisms of this process. Ex-situ analytics, e.g., N2 sorption analysis, XRD, XRF, HRTEM, and STEM-EDX mapping, confirm deposition of homogenous and thin films of ZnO on SiO2. In summary, this study offers new insights into the fundamentals of an ALD process on high surface area powders.

| S-EPMC7279530 | biostudies-literature

TiO2 Nanomembranes Fabricated by Atomic Layer Deposition for Supercapacitor Electrode with Enhanced Capacitance.

Project description:TiO2 is a promising environment friendly, low cost, and high electrochemical performance material. However, impediments like high internal ion resistance and low electrical conductivity restrict its applications as electrode for supercapacitor. In the present work, atomic layer deposition was used to fabricate TiO2 nanomembranes (NMs) with accurately controlled thicknesses. The TiO2 NMs were then used as electrodes for high-performance pseudocapacitors. Experimental results demonstrated that the TiO2 NM with 100 ALD cycles had the highest capacitance of 2332 F/g at 1 A/g with energy density of 81 Wh/kg. The enhanced performance was ascribed to the large surface area and the interconnectivity in the case of ultra-thin and flexible NMs. Increased ALD cycles led to stiffer NMs and decreased capacitance. Moreover, one series of two supercapacitors can light up one light-emitting diode with a working voltage of ~ 1.5 V, sufficiently describing its application values.

| S-EPMC6419636 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data