Unknown

Dataset Information

0

Carbon Nanotube Reinforced Natural Rubber Nanocomposite for Anthropomorphic Prosthetic Foot Purpose.


ABSTRACT: This research is motivated by the desire to restore the quality of life to amputees. The study uses multi-walled carbon nanotube (WMCNT) reinforced natural rubber (NR) polymer nanocomposite (PNC) for prosthetic foot application. The compound formulation was carried out in accordance to a modified procedure described by Hemkaew et al. Mixing of the ingredients during vulcanisation was performed according to ASTM D-3182 standard on an open two-roll mill. The various compositions of the nanocomposites (NCs) were cured at a temperature of 150?±?2?°C and a pressure of 0.2?MPa for 10?minutes in an electrically heated hydraulic press. Mechanical investigation revealed that NR/MWCNT-3 exhibited the highest capacity to withstand tensile and dynamic loading (449.79?MPa). It also showed superior filler distribution and hence improved crystallinity and cross-link. Water absorption test indicated that NR/MWCNT-3 offers optimum dimensional stability at ambient conditions. Moreover, thermogravimetric analysis/differential thermogravimetry (TGA/DTG) showed degradation peaks at 305?°C and 290?°C respectively with temperature range within which the NCs degraded lying between 250?°C and 600?°C. Dynamic mechanical analysis (DMA) revealed that filler incorporation results in higher storage and loss moduli (2000-7500?MPa and 500-1413?MPa respectively). Tan ? curves proved that NR/MWCNT-3 has the highest capacity to dissipate energy through segmental motion. Furthermore, microstructure examination confirmed good filler/matrix adhesion as NR/MWCNT-3 indicated improved interaction; hence higher strength (6.02?MPa) of the NC. Better wear resistance ability can also be reported of the newly developed than existing prosthetic material. It can be deduced that the formulated nanocomposite from MWCNTs for reinforced natural rubber is suitable for the development of the anthropomorphic prosthetic foot.

SUBMITTER: Medupin RO 

PROVIDER: S-EPMC6934845 | biostudies-literature | 2019 Dec

REPOSITORIES: biostudies-literature

altmetric image

Publications

Carbon Nanotube Reinforced Natural Rubber Nanocomposite for Anthropomorphic Prosthetic Foot Purpose.

Medupin Rasaq Olawale RO   Abubakre Oladiran Kamardeen OK   Abdulkareem Ambali Saka AS   Muriana Rasheed Aremu RA   Abdulrahman Asipita Salawu AS  

Scientific reports 20191227 1


This research is motivated by the desire to restore the quality of life to amputees. The study uses multi-walled carbon nanotube (WMCNT) reinforced natural rubber (NR) polymer nanocomposite (PNC) for prosthetic foot application. The compound formulation was carried out in accordance to a modified procedure described by Hemkaew et al. Mixing of the ingredients during vulcanisation was performed according to ASTM D-3182 standard on an open two-roll mill. The various compositions of the nanocomposi  ...[more]

Similar Datasets

| S-EPMC8471937 | biostudies-literature
| S-EPMC6918317 | biostudies-literature
| S-EPMC6281659 | biostudies-literature
| S-EPMC7077650 | biostudies-literature
| S-EPMC7767227 | biostudies-literature
| S-EPMC8271377 | biostudies-literature
| S-EPMC3807724 | biostudies-literature
| S-EPMC8309489 | biostudies-literature
| S-EPMC7433849 | biostudies-literature
| S-EPMC7412307 | biostudies-literature