Dataset Information

Development of generic Asian pelvic bone models using CT-based 3D statistical modelling.

ABSTRACT: Background/Objective:Artificial bone models (ABMs) are used in orthopaedics for research of biomechanics, development of implants and educational purposes. Most of the commercially available ABMs approximate the morphology of Europeans, but they may not depict the Asian anatomy. Therefore, our aim was to develop the first Asian ABM of the pelvis and compare it with the existing pelvic ABM (Synbone®; Caucasian male). Methods:One hundred clinical computed tomography (CTs) of adult pelvises (male n ?= ?50, female n ?= ?50) of Malay, Chinese and Indian descent were acquired. CTs were segmented and defined landmarks were placed. Three 3D statistical pelvic model and mean models (overall, male, female) were generated. Anatomical variations were analysed using principal component analysis. To measure gender-related differences and differences to the existing ABM, distances between the anterior superior iliac spines (ASIS), the anterior inferior iliac spines (AIIS), the promontory and the symphysis (conjugate vera, CV) as well as the ischial spines (diameter transversa, DT) were quantified. Results:Principal component analysis displayed large variability regarding the pelvic shape and size. Female and male statistical models were similar in ASIS (225 ?± ?20; 227 ?± ?13 ?mm; P ?= ?0.4153) and AIIS (185 ?± ?11; 187 ?± ?10 ?mm; P ?= ?0.3982) and differed in CV (116 ?± ?10; 105 ?± ?10 ?mm; P ?< ?0.0001) and DT (105 ?± ?7; 88 ?± ?8 ?mm; P ?< ?0.0001). Comparing the unisex mean model with the pre-existing ABM, the ASIS (226; 275 ?mm; P ?< ?0.0001), the AIIS (186; 209 ?mm; P ?< ?0.0001) and the CV (111; 105 ?mm; P ?< ?0.0001) differed significantly. Both models were similar regarding DT (97; 95 ?mm; P ?= ?0.6927). The analysis revealed notable gender- and size-dependent anatomical variations within the Asian population. Chinese, Malay and Indian descents did not differ notably. The overall Asian model was smaller than the existing ABM. The translation potential of this article:Owing to the large differences between the Asian ABM and the pre-existing ABM, as well as differences between genders, the use of an Asian- and gender-specific ABM is important to consider in research, biomechanics and implant development for this population.

SUBMITTER: Ahrend MD

PROVIDER: S-EPMC6939105 | biostudies-literature | 2020 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Development of generic Asian pelvic bone models using CT-based 3D statistical modelling.

Ahrend Marc-Daniel MD Noser Hansrudi H Shanmugam Rukmanikanthan R Burr Felix F Kamer Lukas L Kamarul Tunku T Hügli Heinz H Nagy Andreas A Richards Robert Geoff RG Gueorguiev-Rüegg Boyko B

Journal of orthopaedic translation 20191104

<h4>Background/objective</h4>Artificial bone models (ABMs) are used in orthopaedics for research of biomechanics, development of implants and educational purposes. Most of the commercially available ABMs approximate the morphology of Europeans, but they may not depict the Asian anatomy. Therefore, our aim was to develop the first Asian ABM of the pelvis and compare it with the existing pelvic ABM (Synbone®; Caucasian male).<h4>Methods</h4>One hundred clinical computed tomography (CTs) of adult p ...[more]

PMID: 31908940

Similar Datasets

Project description:BackgroundComputed tomography (CT) imaging is the most important and common means of detecting and diagnosing pelvic bone tumors. While phantoms with sufficient flexibility and anatomical realism are useful in CT research, using phantoms has been difficult for pelvic bone tumors because of the tumors' relatively large size and highly variable shape. By combining medical 3D printing technology and fresh tumor specimens, this study aimed to design such a hybrid phantom, test its imaging properties, and demonstrate its usefulness in optimizing the CT protocols.MethodsTwo phantoms were designed for 2 patients with pelvic bone tumors who underwent surgical resection. One phantom was scanned with a routine pelvic CT protocol and compared against the patient image to test the imaging properties. We optimized the imaging protocol by assessing a series of varied settings on tube voltage (80, 100, 120, and 140 kVp), tube current (80, 120, and 160 to 200 mAs), and pitch factor (0.5, 0.8, 1.1, and 1.4) using the other phantom. These were assessed in comparison to the clinical reference of 140 kVp, 240 mAs, and 1.0 pitch, respectively. Image quality was quantified in terms of CT value, image noise, signal to noise ratio (SNR), and contrast to noise ratio (CNR) in various regions of interest.ResultsWith the routine protocol, the phantom image showed no significant difference in CT values of the bone and soft tissues and image noise compared to the patient image (all P values >0.05). With a lower tube voltage (80, 100, and 120 kVp) than the reference protocol, the CT value of bone tissue showed significant differences (all P values <0.001). No significant difference was found when applying a reduced tube current (all P values >0.05). With an increased helical pitch, pitches of 0.5, 0.8 and 1.1 were found to be comparable to those using the reference protocol (all P values >0.05).ConclusionsThe 3D-printed phantom can simulate the radiological properties of tumors in the pelvis and was successfully used in imaging studies of pelvic bone tumors. According to our preliminary findings, a low-dose pelvic CT protocol with acceptable image quality is achievable using reduced tube current or increased pitch.

Project description:IntroductionMusculoskeletal models are important tools for studying movement patterns, tissue loading, and neuromechanics. Personalising bone anatomy within models improves analysis accuracy. Few studies have focused on personalising foot bone anatomy, potentially incorrectly estimating the foot's contribution to locomotion. Statistical shape models have been created for a subset of foot-ankle bones, but have not been validated. This study aimed to develop and validate statistical shape models of the functional segments in the foot: first metatarsal, midfoot (second-to-fifth metatarsals, cuneiforms, cuboid, and navicular), calcaneus, and talus; then, to assess reconstruction accuracy of these shape models using sparse anatomical data.MethodsMagnetic resonance images of 24 individuals feet (age = 28 ± 6 years, 52% female, height = 1.73 ± 0.8 m, mass = 66.6 ± 13.8 kg) were manually segmented to generate three-dimensional point clouds. Point clouds were registered and analysed using principal component analysis. For each bone segment, a statistical shape model and principal components were created, describing population shape variation. Statistical shape models were validated by assessing reconstruction accuracy in a leave-one-out cross validation. Statistical shape models were created by excluding a participant's bone segment and used to reconstruct that same excluded bone using full segmentations and sparse anatomical data (i.e. three discrete points on each segment), for all combinations in the dataset. Tali were not reconstructed using sparse anatomical data due to a lack of externally accessible landmarks. Reconstruction accuracy was assessed using Jaccard index, root mean square error (mm), and Hausdorff distance (mm).ResultsReconstructions generated using full segmentations had mean Jaccard indices between 0.77 ± 0.04 and 0.89 ± 0.02, mean root mean square errors between 0.88 ± 0.19 and 1.17 ± 0.18 mm, and mean Hausdorff distances between 2.99 ± 0.98 mm and 6.63 ± 3.68 mm. Reconstructions generated using sparse anatomical data had mean Jaccard indices between 0.67 ± 0.06 and 0.83 ± 0.05, mean root mean square error between 1.21 ± 0.54 mm and 1.66 ± 0.41 mm, and mean Hausdorff distances between 3.21 ± 0.94 mm and 7.19 ± 3.54 mm. Jaccard index was higher (P < 0.01) and root mean square error was lower (P < 0.01) in reconstructions from full segmentations compared to sparse anatomical data. Hausdorff distance was lower (P < 0.01) for midfoot and calcaneus reconstructions using full segmentations compared to sparse anatomical data.ConclusionFor the first time, statistical shape models of the primary functional segments of the foot were developed and validated. Foot segments can be reconstructed with minimal error using full segmentations and sparse anatomical landmarks. In future, larger training datasets could increase statistical shape model robustness, extending use to paediatric or pathological populations.

Project description:ObjectivesTo compare ultra-low-dose CT (ULD-CT) of the osseous pelvis with tin filtration to standard clinical CT (CT), and to assess the quality of computed virtual pelvic radiographs (VRs).MethodsCT protocols were optimized in a phantom and three pelvic cadavers. Thirty prospectively included patients received both standard CT (automated tube voltage selection and current modulation) and tin-filtered ULD-CT of the pelvis (Sn140kV/50mAs). VRs of ULD-CT data were computed using an adapted cone beam-based projection algorithm and were compared to digital radiographs (DRs) of the pelvis. CT and DR dose parameters and quantitative and qualitative measures (1 = worst, 4 = best) were compared. CT and ULD-CT were assessed for osseous pathologies.ResultsDose reduction of ULD-CT was 84% compared to CT, with a median effective dose of 0.38 mSv (quartile 1-3: 0.37-0.4 mSv) versus 2.31 mSv (1.82-3.58 mSv; p < .001), respectively. Mean dose of DR was 0.37 mSv (± 0.14 mSv). The median signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) of bone were significantly higher for CT (64.3 and 21.5, respectively) compared to ULD-CT (50.4 and 18.8; p ≤ .01), while ULD-CT was significantly more dose efficient (figure of merit (FOM) 927.6) than CT (FOM 167.6; p < .001). Both CT and ULD-CT were of good image quality with excellent depiction of anatomy, with a median score of 4 (4-4) for both methods (p = .1). Agreement was perfect between both methods regarding the prevalence of assessed osseous pathologies (p > .99). VRs were successfully calculated and were equivalent to DRs.ConclusionTin-filtered ULD-CT of the pelvis at a dose equivalent to standard radiographs is adequate for assessing bone anatomy and osseous pathologies and had a markedly superior dose efficiency than standard CT.Key points• Ultra-low-dose pelvic CT with tin filtration (0.38 mSv) can be performed at a dose of digital radiographs (0.37 mSv), with a dose reduction of 84% compared to standard CT (2.31 mSv). • Tin-filtered ultra-low-dose CT had lower SNR and CNR and higher image noise than standard CT, but showed clear depiction of anatomy and accurate detection of osseous pathologies. • Virtual pelvic radiographs were successfully calculated from ultra-low-dose CT data and were equivalent to digital radiographs.

Dataset Information

Development of generic Asian pelvic bone models using CT-based 3D statistical modelling.

Publications

Development of generic Asian pelvic bone models using CT-based 3D statistical modelling.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets