Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Mechanical properties and microstructures data of AISI 1070 steel quenched in epoxidized transesterified cottonseed oil.

ABSTRACT: The quenching ability of modified and unmodified cottonseed oils was investigated using AISI 1070 steel. In the event of the quenching, the steel samples immersed in each of five distinct quench media, namely epoxidized cottonseed oil (EC), epoxidized-transesterified cottonseed oil (ETC), transesterified cottonseed oil (TC) and fresh cottonseed oil (FC). Tests and analysis conducted determined mechanical properties and microstructures of the quenched samples. The data obtained showed that ETC outperformed other quench media with hardness value of the quenched sample; 407 HVN (hardness value from the FC-quenched sample) increased to 746 HVN indicating an 83.29% improvement. Notably, in the microstructure of ETC-quenched sample, a unique homogeneous microstructure containing a mixture of lath and plate martensite observed with largest martensite per cent of 95.

SUBMITTER: Dodo RM

PROVIDER: S-EPMC7417905 | biostudies-literature | 2020 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Mechanical properties and microstructures data of AISI 1070 steel quenched in epoxidized transesterified cottonseed oil.

Dodo R M RM Ause T T Dauda E T ET Shehu U U Gaminana J O JO Popoola A P I API Mudiare E E

Data in brief 20200730

The quenching ability of modified and unmodified cottonseed oils was investigated using AISI 1070 steel. In the event of the quenching, the steel samples immersed in each of five distinct quench media, namely epoxidized cottonseed oil (EC), epoxidized-transesterified cottonseed oil (ETC), transesterified cottonseed oil (TC) and fresh cottonseed oil (FC). Tests and analysis conducted determined mechanical properties and microstructures of the quenched samples. The data obtained showed that ETC ou ...[more]

PMID: 32802922

Similar Datasets

Spark plasma welding joining of copper- AISI4140 steel: Microstructures and mechanical properties

Project description: Not available

| S-EPMC10641177 | biostudies-literature

Experimental data on mechanical properties evaluation of medium carbon steel quenched in different waste media.

Project description:Several wastes can be instrumental in the improvement of the mechanical properties of medium carbon steel when quenched. The quenching media employed such as coconut water (CW), pap water (PW) and spent engine oil (SPE) have been largely considered as wastes. The data in this article are related to the research article titled "Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different Media" (Ikubanni et al., 2017) [1]. The article provides information on the mechanical properties evaluation of medium carbon steel quenched in different media. Twenty-seven (27) samples of medium carbon steel samples were heated to temperatures of 730 °C, 760 °C and 790 °C and soaked for 30, 45 and 60 min respectively. The test results recorded include hardness value, yield strength (YS) and the ultimate tensile strength (UTS) for each of the samples at different heating temperatures and soaking time for the different quenching media.

| S-EPMC6143757 | biostudies-literature

Effects of Cooling Rate during Quenching and Tempering Conditions on Microstructures and Mechanical Properties of Carbon Steel Flange.

Project description:This study investigated the mechanical properties of steel in flanges, with the goal of obtaining high strength and high toughness. Quenching was applied alone or in combination with tempering at one of nine combinations of three temperatures TTEM and durations tTEM. Cooling rates at various flange locations during quenching were first estimated using finite element method simulation, and the three locations were selected for mechanical testing in terms of cooling rate. Microstructures of specimens were observed at each condition. Tensile test and hardness test were performed at room temperature, and a Charpy impact test was performed at -46 °C. All specimens had a multiphase microstructure composed of matrix and secondary phases, which decomposed under the various tempering conditions. Decrease in cooling rate (CR) during quenching caused reduction in hardness and strength but did not affect low-temperature toughness significantly. After tempering, hardness and strength were reduced and low-temperature toughness was increased. Microstructures and mechanical properties under the various tempering conditions and CRs during quenching were discussed. This work was based on the properties directly obtained from flanges under industrial processes and is thus expected to be useful for practical applications.

| S-EPMC7560453 | biostudies-literature

Enhancement of the Mechanical Properties of Poly(lactic acid)/Epoxidized Soybean Oil Blends by the Addition of 3-Aminophenylboronic Acid.

Project description:Here, the high-strength, high-ductility blends of poly(lactic acid) (PLA) with epoxidized soybean oil (ESO) and 3-aminophenylboronic acid (APBA) were successfully prepared via a melt-bending method. The effects of APBA addition on the mechanical and thermal properties, morphologies, and crystallization behavior of the blends were investigated. The results showed that the addition of APBA endowed the PLA/ESO/APBA blends with a good balance of strength and toughness. The yield strength of the PLA/ESO/APBA (90:10:3) blend was 70 MPa, which was 25% higher than that of the corresponding PLA/ESO blend without APBA (56 MPa), while its elongation at break reached 160%, which is greatly superior to that of pure PLA (6.5%). Scanning electron microscopy images showed that the incorporation of APBA significantly improved the compatibility between PLA and ESO, while gel permeation chromatography and rheological analysis suggested the occurrence of complex reactions between the three constituents, which improved the compatibility between PLA and ESO and enhanced the mechanical properties of the blends. Hence, the PLA/ESO/APBA blends possess great potential for application in the manufacture of environmentally friendly degradable plastics.

| S-EPMC9161406 | biostudies-literature

In-situ ToF-SIMS analyses of deuterium re-distribution in austenitic steel AISI 304L under mechanical load.

Project description:Hydrocarbons fuel our economy. Furthermore, intermediate goods and consumer products are often hydrocarbon-based. Beside all the progress they made possible, hydrogen-containing substances can have severe detrimental effects on materials exposed to them. Hydrogen-assisted failure of iron alloys has been recognised more than a century ago. The present study aims to providing further insight into the degradation of the austenitic stainless steel AISI 304L (EN 1.4307) exposed to hydrogen. To this end, samples were electrochemically charged with the hydrogen isotope deuterium (2H, D) and analysed by scanning electron microscopy (SEM), electron back-scatter diffraction (EBSD) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). It was found that deuterium caused a phase transformation from the original ? austenite into ?- and ?'-martensite. Despite their low solubility for hydrogen, viz. deuterium, the newly formed phases showed high deuterium concentration which was attributed to the increased density of traps. Information about the behaviour of deuterium in the material subjected to external mechanical load was gathered. A four-point-bending device was developed for this purpose. This allowed to analyse in-situ pre-charged samples in the ToF-SIMS during the application of external mechanical load. The results indicate a movement of deuterium towards the regions of highest stress.

| S-EPMC7046711 | biostudies-literature

Influence of Epoxidized Canola Oil (eCO) and Cellulose Nanocrystals (CNCs) on the Mechanical and Thermal Properties of Polyhydroxybutyrate (PHB)-Poly(lactic acid) (PLA) Blends.

Project description:Two major obstacles to utilizing polyhydroxybutyrate (PHB)-a biodegradable and biocompatible polymer-in commercial applications are its low tensile yield strength (<10 MPa) and elongation at break (~5%). In this work, we investigated the modification of the mechanical properties of PHB through the use of a variety of bio-derived additives. Poly(lactic acid) (PLA) and sugarcane-sourced cellulose nanocrystals (CNCs) were proposed as mechanical reinforcing elements, and epoxidized canola oil (eCO) was utilized as a green plasticizer. Zinc acetate was added to PHB and PLA blends in order to improve blending. Composites were mixed in a micro-extruder, and the resulting filaments were molded into 2-mm sheets utilizing a hot-press prior to characterization. The inclusion of the various additives was found to influence the crystallization process of PHB without affecting thermal stability. In general, the addition of PLA and, to a lesser degree, CNCs, resulted in an increase in the Young's modulus of the material, while the addition of eCO improved the strain at break. Overall, samples containing eCO and PLA (at concentrations of 10 wt %, and 25 wt %, respectively) demonstrated the best mechanical properties in terms of Young's modulus, tensile strength and strain at break.

| S-EPMC6631437 | biostudies-literature

Influence of Size on the Microstructure and Mechanical Properties of an AISI 304L Stainless Steel-A Comparison between Bulk and Fibers.

Project description:In this work, the mechanical properties and microstructural features of an AISI 304L stainless steel in two presentations, bulk and fibers, were systematically studied in order to establish the relationship among microstructure, mechanical properties, manufacturing process and effect on sample size. The microstructure was analyzed by XRD, SEM and TEM techniques. The strength, Young's modulus and elongation of the samples were determined by tensile tests, while the hardness was measured by Vickers microhardness and nanoindentation tests. The materials have been observed to possess different mechanical and microstructural properties, which are compared and discussed.

| S-EPMC5455263 | biostudies-other

Helical Microstructures of the Mineralized Coralline Red Algae Determine Their Mechanical Properties.

Project description:Through controlled biomineralization, organisms yield complicated structures with specific functions. Here, Jania sp., an articulated coralline red alga that secretes high-Mg calcite as part of its skeleton, is in focus. It is shown that Jania sp. exhibits a remarkable structure, which is highly porous (with porosity as high as 64 vol%) and reveals several hierarchical orders from the nano to the macroscale. It is shown that the structure is helical, and proven that its helical configuration provides the alga with superior compliance that allows it to adapt to stresses in its natural environment. Thus, the combination of high porosity and a helical configuration result in a sophisticated, light-weight, compliant structure. It is anticipated that the findings on the advantages of such a structure are likely to be of value in the design or improvement of lightweight structures with superior mechanical properties.

| S-EPMC7284203 | biostudies-literature

Effects of Rare Earth Metals on Steel Microstructures.

Project description:Rare earth metals are used in semiconductors, solar cells and catalysts. This review focuses on the background of oxide metallurgy technologies, the chemical and physical properties of rare earth (RE) metals, the background of oxide metallurgy, the functions of RE metals in steelmaking, and the influences of RE metals on steel microstructures. Future prospects for RE metal applications in steelmaking are also presented.

| S-EPMC5456817 | biostudies-literature

Formation of Nanospikes on AISI 420 Martensitic Stainless Steel under Gallium Ion Bombardment.

Project description:The focused ion beam (FIB) has proven to be an extremely powerful tool for the nanometer-scale machining and patterning of nanostructures. In this work, we experimentally study the behavior of AISI 420 martensitic stainless steel when bombarded by Ga+ ions in a FIB system. The results show the formation of nanometer sized spiky structures. Utilizing the nanospiking effect, we fabricated a single-tip needle with a measured 15.15 nanometer curvature radius and a microneedle with a nanometer sized spiky surface. The nanospikes can be made straight or angled, depending on the incident angle between the sample and the beam. We also show that the nanospiking effect is present in ferritic AISI 430 stainless steel. The weak occurrence of the nanospiking effect in between nano-rough regions (nano-cliffs) was also witnessed for austenitic AISI 316 and martensitic AISI 431 stainless steel samples.

| S-EPMC6836003 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data