Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Tailoring nanocomposite interfaces with graphene to achieve high strength and toughness.

ABSTRACT: The nanofiller reinforcing effect in nanocomposites is often far below the theoretically predicted values, largely because of the poor interfacial interaction between the nanofillers and matrix. Here, we report that graphene-wrapped B4C nanowires (B4C-NWs@graphene) empowered exceptional dispersion of nanowires in matrix and superlative nanowire-matrix bonding. The 0.2 volume % B4C-NWs@graphene reinforced epoxy composite exhibited simultaneous enhancements in strength (144.2 MPa), elastic modulus (3.5 GPa), and ductility (15%). Tailoring the composite interfaces with graphene enabled effective utilization of the nanofillers, resulting in two times increase in load transfer efficiency. Molecular dynamics simulations unlocked the shear mixing graphene/nanowire self-assembly mechanism. This low-cost yet effective technique presents unprecedented opportunities for improving nanocomposite interfaces, enabling high load transfer efficiency, and opens up a new path for developing strong and tough nanocomposites.

SUBMITTER: Song N

PROVIDER: S-EPMC7556841 | biostudies-literature | 2020 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Tailoring nanocomposite interfaces with graphene to achieve high strength and toughness.

Song Ningning N Gao Zan Z Li Xiaodong X

Science advances 20201014 42

The nanofiller reinforcing effect in nanocomposites is often far below the theoretically predicted values, largely because of the poor interfacial interaction between the nanofillers and matrix. Here, we report that graphene-wrapped B4C nanowires (B4C-NWs@graphene) empowered exceptional dispersion of nanowires in matrix and superlative nanowire-matrix bonding. The 0.2 volume % B4C-NWs@graphene reinforced epoxy composite exhibited simultaneous enhancements in stre ...[more]

PMID: 33055154

Similar Datasets

Bioinspired, graphene-enabled Ni composites with high strength and toughness.

Project description:Nature's wisdom resides in achieving a joint enhancement of strength and toughness by constructing intelligent, hierarchical architectures from extremely limited resources. A representative example is nacre, in which a brick-and-mortar structure enables a confluence of toughening mechanisms on multiple length scales. The result is an outstanding combination of strength and toughness which is hardly achieved by engineering materials. Here, a bioinspired Ni/Ni3C composite with nacre-like, brick-and-mortar structure was constructed from Ni powders and graphene sheets. This composite achieved a 73% increase in strength with only a 28% compromise on ductility, leading to a notable improvement in toughness. The graphene-derived Ni-Ti-Al/Ni3C composite retained high hardness up to 1000°C. The present study unveiled a method to smartly use 2D materials to fabricate high-performance metal matrix composites with brick-and-mortar structure through interfacial reactions and, furthermore, created an opportunity of developing advanced Ni-C-based alloys for high-temperature environments.

| S-EPMC6544452 | biostudies-literature

Toughness and strength of nanocrystalline graphene.

Project description:Pristine monocrystalline graphene is claimed to be the strongest material known with remarkable mechanical and electrical properties. However, graphene made with scalable fabrication techniques is polycrystalline and contains inherent nanoscale line and point defects--grain boundaries and grain-boundary triple junctions--that lead to significant statistical fluctuations in toughness and strength. These fluctuations become particularly pronounced for nanocrystalline graphene where the density of defects is high. Here we use large-scale simulation and continuum modelling to show that the statistical variation in toughness and strength can be understood with 'weakest-link' statistics. We develop the first statistical theory of toughness in polycrystalline graphene, and elucidate the nanoscale origins of the grain-size dependence of its strength and toughness. Our results should lead to more reliable graphene device design, and provide a framework to interpret experimental results in a broad class of two-dimensional materials.

| S-EPMC4738364 | biostudies-literature

Sequentially bridged graphene sheets with high strength, toughness, and electrical conductivity.

Project description:We here show that infiltrated bridging agents can convert inexpensively fabricated graphene platelet sheets into high-performance materials, thereby avoiding the need for a polymer matrix. Two types of bridging agents were investigated for interconnecting graphene sheets, which attach to sheets by either ?-? bonding or covalent bonding. When applied alone, the ?-? bonding agent is most effective. However, successive application of the optimized ratio of ?-? bonding and covalent bonding agents provides graphene sheets with the highest strength, toughness, fatigue resistance, electrical conductivity, electromagnetic interference shielding efficiency, and resistance to ultrasonic dissolution. Raman spectroscopy measurements of stress transfer to graphene platelets allow us to decipher the mechanisms of property improvement. In addition, the degree of orientation of graphene platelets increases with increasing effectiveness of the bonding agents, and the interlayer spacing increases. Compared with other materials that are strong in all directions within a sheet, the realized tensile strength (945 MPa) of the resin-free graphene platelet sheets was higher than for carbon nanotube or graphene platelet composites, and comparable to that of commercially available carbon fiber composites. The toughness of these composites, containing the combination of ?-? bonding and covalent bonding, was much higher than for these other materials having high strengths for all in-plane directions, thereby opening the path to materials design of layered nanocomposites using multiple types of quantitatively engineered chemical bonds between nanoscale building blocks.

| S-EPMC6003513 | biostudies-literature

Diphenolic Acid-Derived Hyperbranched Epoxy Thermosets with High Mechanical Strength and Toughness.

Project description:Diglycidyl ether of bisphenol A (DGEBA) is a kind of widely used epoxy resin, but its thermosets normally show high brittleness and poor impact resistance due to the intrinsic rigid aromatic rings, which limit its application greatly. To avoid this drawback, we proposed a method to prepare a series of hyperbranched epoxies (HBEPs) with different molecular weights. After HBEPs were cured with methyl tetrahydrophthalic anhydride (MTHPA), characterizations were carried out to evaluate the properties of the cured HBEP samples. Testing results indicate that the hyperbranched thermosets can achieve excellent mechanical strength and toughness (tensile strength: 89.2 MPa, bending strength: 129.6 MPa, elongation at break: 6.1%, toughness: 4.5 MJ m-3, and impact strength: 6.7 kJ m-2), which are superior to those of the thermosets of commercial DGEBA (tensile strength: 81.2 MPa, bending strength: 108.2 MPa, elongation at break: 3.0%, toughness: 1.5 MJ m-3, and impact strength: 4.2 kJ m-2). In addition, HBEP with the highest molecular weight and degree of branching shows the best comprehensive mechanical properties. All hyperbranched thermosets exhibit high glass-transition temperatures (T g) and thermostability, which further illustrates the potential application value of HBEPs.

| S-EPMC8675157 | biostudies-literature

Adhesion toughness of multilayer graphene films.

Project description:Interface adhesion toughness between multilayer graphene films and substrates is a major concern for their integration into functional devices. Results from the circular blister test, however, display seemingly anomalous behaviour as adhesion toughness depends on number of graphene layers. Here we show that interlayer shearing and sliding near the blister crack tip, caused by the transition from membrane stretching to combined bending, stretching and through-thickness shearing, decreases fracture mode mixity G II/G I, leading to lower adhesion toughness. For silicon oxide substrate and pressure loading, mode mixity decreases from 232% for monolayer films to 130% for multilayer films, causing the adhesion toughness G c to decrease from 0.424 J?m-2 to 0.365 J?m-2. The mode I and II adhesion toughnesses are found to be G Ic?=?0.230 J?m-2 and G IIc?=?0.666 J?m-2, respectively. With point loading, mode mixity decreases from 741% for monolayer films to 262% for multilayer films, while the adhesion toughness G c decreases from 0.543 J?m-2 to 0.438 J?m-2.

| S-EPMC5717257 | biostudies-literature

High stretchability, strength, and toughness of living cells enabled by hyperelastic vimentin intermediate filaments.

Project description:In many developmental and pathological processes, including cellular migration during normal development and invasion in cancer metastasis, cells are required to withstand severe deformations. The structural integrity of eukaryotic cells under small deformations has been known to depend on the cytoskeleton including actin filaments (F-actin), microtubules (MT), and intermediate filaments (IFs). However, it remains unclear how cells resist severe deformations since both F-actin and microtubules yield or disassemble under moderate strains. Using vimentin containing IFs (VIFs) as a model for studying the large family of IF proteins, we demonstrate that they dominate cytoplasmic mechanics and maintain cell viability at large deformations. Our results show that cytoskeletal VIFs form a stretchable, hyperelastic network in living cells. This network works synergistically with other cytoplasmic components, substantially enhancing the strength, stretchability, resilience, and toughness of cells. Moreover, we find the hyperelastic VIF network, together with other quickly recoverable cytoskeletal components, forms a mechanically robust structure which can mechanically recover after damage.

| S-EPMC6717279 | biostudies-literature

Strategies Regarding High-Temperature Applications w.r.t Strength, Toughness, and Fatigue Life for SA508 Alloy.

Project description:In this work, the stabilities of secondary phases, including carbides, brittle phases, and inclusions, were simulated by computational thermodynamics. Calphad strategical optimization is preferable for all steel alloys regarding energy resource consumption during manufacturing and processing. The alloy composition has been changed to enhance the strength, hardenability, and longevity of a reactor pressure vessel (RPV) steel by computing the phase equilibrium calculations and predicting mechanical properties such as yield and tensile strengths hardness and martensitic and bainitic volume fractions. The stabilities of the pro-eutectoid carbides (cementite), inclusions, and brittle phases in SA508 steel are critical to the toughness and fatigue life related to the crack initiation and expansion of this steel. Overall, the simulations presented in this paper explain the mechanisms that can affect the fatigue resistance and toughness of steel and offer a possible solution to controlling these properties at elevated temperatures by optimizing the steel composition and heat treatment process parameters.

| S-EPMC8069931 | biostudies-literature

Graphene/Sulfur/Carbon Nanocomposite for High Performance Lithium-Sulfur Batteries.

Project description:Here, we report a two-step synthesis of graphene/sulfur/carbon ternary composite with a multilayer structure. In this composite, ultrathin S layers are uniformly deposited on graphene nanosheets and covered by a thin layer of amorphous carbon derived from ?-cyclodextrin on the surface. Such a unique microstructure, not only improves the electrical conductivity of sulfur, but also effectively inhibits the dissolution of polysulfides during charging/discharging processes. As a result, this ternary nanocomposite exhibits excellent electrochemical performance. It can deliver a high initial discharge and charge capacity of 1410 mAh·g-¹ and 1370 mAh·g-¹, respectively, and a capacity retention of 63.8% can be achieved after 100 cycles at 0.1 C (1 C = 1675 mA·g-¹). A relatively high specific capacity of 450 mAh·g-¹ can still be retained after 200 cycles at a high rate of 2 C. The synthesis process introduced here is simple and broadly applicable to the modification of sulfur cathode for better electrochemical performance.

| S-EPMC5304645 | biostudies-literature

Ultrahigh Charpy impact toughness (~450J) achieved in high strength ferrite/martensite laminated steels.

Project description:Strength and toughness are a couple of paradox as similar as strength-ductility trade-off in homogenous materials, body-centered-cubic steels in particular. Here we report a simple way to get ultrahigh toughness without sacrificing strength. By simple alloying design and hot rolling the 5Mn3Al steels in ferrite/austenite dual phase temperature region, we obtain a series of ferrite/martensite laminated steels that show up-to 400-450J Charpy V-notch impact energy combined with a tensile strength as high as 1.0-1.2?GPa at room temperature, which is nearly 3-5 times higher than that of conventional low alloy steels at similar strength level. This remarkably enhanced toughness is mainly attributed to the delamination between ferrite and martensite lamellae. The current finding gives us a promising way to produce high strength steel with ultrahigh impact toughness by simple alloying design and hot rolling in industry.

| S-EPMC5288709 | biostudies-other

High-Strength GO/PA66 Nanocomposite Fibers via In Situ Precipitation and Polymerization.

Project description:The uniform dispersion of graphene oxide (GO) and strong interfacial bonding are the key factors in achieving the high mechanical strength of GO/polymer composites. It is still challenging to prepare GO/PA66 composites with uniform GO dispersion by the in situ polymerization method. In this paper, we prepare GO/PA66 salt nanocomposite by in situ precipitating PA66 salt with GO in ethanol. The GO/PA66 nanocomposite fibers are then fabricated using the as-prepared GO/PA66 salt by in situ polymerizing and melt spinning. By tuning the GO content, the tensile strength and Young's modulus of the GO/PA66 fibers are increased from 265 ± 18 to 710 ± 14 MPa (containing 0.3 wt% GO) and from 1.1 ± 0.08 to 3.8 ± 0.19 GPa (containing 0.5 wt% GO), respectively. The remarkable improvements are attributed to the uniform dispersion of GO in the GO/PA66 salt nanocomposite via ionic bonding and hydrogen bonding in the in situ precipitation process, and the covalent interfacial bonding between the GO and PA66 during the in situ polymerization process. This work sheds light on the easy fabrication of high-performance PA66-based nanocomposites.

| S-EPMC8196895 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data