Browse
Submit Data
Databases
API
Help

Dataset Information

38 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Au/Ag/Cu-Mixed Catalysts for the Eco-Friendly Oxidation of 5-Hydroxymethylfurfural and Related Compounds to Carboxylic Acids under Atmospheric Oxygen in Water.

ABSTRACT: A green method for the oxidation of alcohols to carboxylic acids was developed using a novel co-catalytic system based on gold, silver, and copper catalysts. This reaction system was conducted under atmospheric oxygen in water and mild conditions to selectively oxidize 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid, as a building block for polyethylene furanoate, which is a 100% bio-based, future alternative to the petroleum-based polyethylene terephthalate. Furthermore, various primary alcohols were conveniently oxidized to their corresponding carboxylic acids in up to quantitative yields.

SUBMITTER: Yamamoto Y

PROVIDER: S-EPMC7841932 | biostudies-literature | 2021 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Au/Ag/Cu-Mixed Catalysts for the Eco-Friendly Oxidation of 5-Hydroxymethylfurfural and Related Compounds to Carboxylic Acids under Atmospheric Oxygen in Water.

Yamamoto Yuki Y Ota Miyuto M Kodama Shintaro S Michimoto Kazuki K Nomoto Akihiro A Ogawa Akiya A Furuya Mitsunori M Kawakami Kiminori K

ACS omega 20201209 3

A green method for the oxidation of alcohols to carboxylic acids was developed using a novel co-catalytic system based on gold, silver, and copper catalysts. This reaction system was conducted under atmospheric oxygen in water and mild conditions to selectively oxidize 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid, as a building block for polyethylene furanoate, which is a 100% bio-based, future alternative to the petroleum-based polyethylene terephthalate. Furthermore, various primary a ...[more]

PMID: 33521463

Similar Datasets

Ag surface segregation in nanoporous Au catalysts during CO oxidation.

Project description:The present study focuses on the modification of surface compositional profiles induced in nanoporous (NP) Au catalysts by the catalytic oxidation of carbon monoxide to carbon dioxide in the presence of oxygen. The phenomenon has deep implications concerning the catalytic behavior of NP Au foams in particular, and more in general for the design of more efficient catalysts. Aimed at gaining deeper insight into the mechanisms governing surface segregation, we exposed NP Au foams containing residual Ag to a mixture of gaseous carbon monoxide and oxygen at different temperature. Structural and surface composition analyses pointed out the concomitant occurrence of both NP Au coarsening and Ag surface segregation processes. Experimental findings suggest for Ag surface segregation a two-stage kinetics. During the initial, rapid coarsening of the NP Au structure, Ag surface segregation is mediated by surface rearrangements, which allow the Ag atoms to reach the surface at anomalously fast rate. As coarsening decelerates, the slower diffusion of buried Ag atoms towards the surface predominates, due to favorable chemical interactions with adsorbed oxygen. This novel mechanism's understanding can benefit strategic areas of science and technology.

| S-EPMC6185915 | biostudies-literature

Effect of the Electronic State of Cu, Ag, and Au on Diesel Soot Abatement: Performance of Cu/ZnO, Ag/ZnO, and Au/ZnO Catalysts.

Project description:Noble metals such as Au, Ag, and Cu supported over semiconducting ZnO are well-known heterogeneous oxidation catalysts. All of them have been utilized for the oxidation of diesel soot with varied success. However, Au-supported ZnO is seen to be superior among them. Here, we present a comparative study of all these three catalysts for diesel soot oxidation to explain why Au/ZnO is the best among them, demonstrating the contribution of electronic states of metals in composite catalysts. The electronic states of Cu, Ag, and Au determined by X-ray photoelectron spectroscopy on 1 wt % Cu/ZnO, 1 wt % Ag/ZnO, and 1 wt % Au/ZnO catalysts were correlated with their diesel soot oxidation activities. Although all three catalysts present reasonable diesel soot oxidation activities at relatively low temperature, 1% Cu/ZnO and 1% Ag/ZnO oxidize only about 60% of the deposited diesel soot around 250 °C and 1% Au/ZnO oxidizes 100% of the deposited diesel soot, at a temperature as low as 230 °C. The activity of the catalysts is attributed to the formation of stable M0-Mδ+ bifunctional catalytic sites at the metal-ZnO interface, which enhances the contact efficiency of solid diesel soot on Mδ+ and generates the superoxide species on M0 moieties. The stability of the bifunctional M0-Mδ+ sites is controlled by the electronic interactions between the metal (M) and n-type semiconductor ZnO at their interface. Very high activity of 1% Au/ZnO is attributed to the presence of Au3+ at the catalyst surface, which generates a stronger Coulombic force with diesel soot electrons. We demonstrate a direct relation between the diesel soot oxidation activity of these three metals and their electronic states at the catalyst surface.

| S-EPMC6648296 | biostudies-literature

Aerobic Oxidation of 5-Hydroxymethylfurfural over Ag Nanoparticle Catalysts Stabilized by Polyvinylpyrrolidone with Different Molecular Weights.

Project description:The metal-support interaction (MSI) has a remarkable effect on the catalytic properties, but how to precisely modulate its degree remains a huge challenge. Herein, polyvinylpyrrolidone (PVP) with three different molecular weights (MWs) (24, 58, and 130 kDa) was used as a capping agent to fabricate Ag nanoparticles (NPs) supported on ZrO2. The physiochemical properties of the catalysts were characterized by X-ray diffraction (XRD), Transmission Electron Microscope (TEM), X-ray Photoelectron Spectroscopy (XPS), and Fourier transform infrared (FT-IR) techniques. The impacts of MSI on the catalytic activity and reaction kinetics for aerobic oxidation of 5-hydroxymethylfurfural (HMF) were investigated. The results showed that the introduction of PVP with various MWs could efficiently tailor the interfacial interactions and charge transfers (CT) among PVP, the support, and Ag NPs, thereby affecting the oxidation activity of HMF. The turnover number (TON) for HMF oxidation decreases in the order of unsupported colloidal Ag clusters > Ag/ZrO2 (58,000) > Ag/ZrO2 (130,000) > Ag/ZrO2 (24,000) > Ag/ZrO2. The reason for this large difference in the catalytic activity for HMF oxidation is that various MWs of PVP result in a change of MSI, thereby facilitating CT from PVP to Ag metal sites. This study offers a new strategy for modulating MSI by varying the MW of capping agents, thereby tuning the catalytic properties in the oxidation of HMF.

| S-EPMC7558134 | biostudies-literature

Eco-friendly graphene synthesis on Cu foil electroplated by reusing Cu etchants.

Project description:Graphene film grown by chemical vapor deposition using Cu substrate is promising for industrial applications. After etching the Cu substrate, which is essential step in graphene transfer process, the etchant solution must be chemically treated to prevent water pollution. Here we investigated that a method of reusing Cu etchant used to synthesize graphene, the synthesis of graphene on the resulting reused Cu films (R-G), and the application of R-G to organic light-emitting diodes (OLEDs) and organic photovoltaic cells (OPVs). The turn-on voltage of OLEDs based on the R-G electrode was 4.2 V, and the efficiencies of OPVs based on the R-G electrode were 5.9-5.95%, that are similar to or better than those of the indium-tin-oxide-based devices. These results suggest that the reusing of Cu foil by the electroplating method could reduce the cost of graphene synthesis, thus opening a wide range of applications in graphene electronics.

| S-EPMC5381280 | biostudies-literature

Au-Ag-Cu nano-alloys: tailoring of permittivity.

Project description:Precious metal alloys enables new possibilities to tailor materials for specific optical functions. Here we present a systematic study of the effects of a nanoscale alloying on the permittivity of Au-Ag-Cu metals at 38 different atomic mixing ratios. The permittivity was measured and analyzed numerically by applying the Drude model. X-ray diffraction (XRD) revealed the face centered cubic lattice of the alloys. Both, optical spectra and XRD results point towards an equivalent composition-dependent electron scattering behavior. Correlation between the fundamental structural parameters of alloys and the resulting optical properties is elucidated. Plasmonic properties of the Au-Ag-Cu alloy nanoparticles were investigated by numerical simulations. Guidelines for designing plasmonic response of nano- structures and their patterns are presented from the material science perspective.

| S-EPMC4846990 | biostudies-literature

Eco-Friendly Cavity-Containing Iron Oxides Prepared by Mild Routes as Very Efficient Catalysts for the Total Oxidation of VOCs.

Project description:Iron oxides (FeOx) are non-toxic, non-expensive and environmentally friendly compounds, which makes them good candidates for many industrial applications, among them catalysis. In the present article five catalysts based on FeOx were synthesized by mild routes: hydrothermal in subcritical and supercritical conditions (Fe-HT, Few200, Few450) and solvothermal (Fe-ST1 and Fe-ST2). The catalytic activity of these catalysts was studied for the total oxidation of toluene using very demanding conditions with high space velocities and including water and CO₂ in the feed. The samples were characterized by X-ray diffraction (XRD), scanning and high-resolution transmission electron microscopy (SEM and HRTEM), X-ray photoelectron spectroscopy (XPS) and nitrogen adsorption-desorption isotherms. It was observed that the most active catalyst was a cavity-containing porous sample prepared by a solvothermal method with a relatively high surface area (55 m² g-1) and constituted by flower-like aggregates with open cavities at the catalyst surface. This catalyst displayed superior performance (100% of toluene conversion at 325 °C using highly demanding conditions) and this performance can be maintained for several catalytic cycles. Interestingly, the porous iron oxides present not only a higher catalytic activity than the non-porous but also a higher specific activity per surface area. The high activity of this catalyst has been related to the possible synergistic effect of compositional, structural and microstructural features emphasizing the role of the surface area, the crystalline phase present, and the properties of the surface.

| S-EPMC6119960 | biostudies-literature

Bottom-Up (Cu, Ag, Au)/Al2O3/Bi2Te3 Assembled Thermoelectric Heterostructures.

Project description:The interface affects the transmission behavior of electrons and phonons, which in turn determines the performance of thermoelectric materials. In this paper, metals (Cu, Ag, Au)/Al2O3/Bi2Te3 heterostructures have been fabricated from bottom to up to optimize the thermoelectric power factor. The introducing metals can be alloyed with Bi2Te3 or form interstitials or dopants to adjust the carrier concentration and mobility. In addition, the metal-semiconductor interface as well as the metal-insulator-semiconductor interface constructed by the introduced metal and Al2O3 would further participate in the regulation of the carrier transport process. By adjusting the metal and oxide layer, it is possible to realize the simultaneous optimization of electric conductivity and Seebeck coefficient. This work will enable the optimal and novel design of heterostructures for thermoelectric materials with further improved performance.

| S-EPMC8145968 | biostudies-literature

Silica-Supported Au-Ag Catalysts for the Selective Hydrogenation of Butadiene.

Project description:Gold and silver are miscible over the entire composition range, and form an attractive combination for fundamental studies on bimetallic catalysts. Au-Ag catalysts have shown synergistic effects for different oxidation and liquid-phase hydrogenation reactions, but have rarely been studied for gas-phase hydrogenation. In this study 3?nm particles of Au, Ag and Au-Ag supported on silica (SBA-15) were investigated as catalysts for selective hydrogenation of butadiene in an excess of propene. The Au catalyst was over an order of magnitude more active than the Ag catalyst at 120?°C. The initial activity of the Au-Ag catalysts scaled linearly with the Au-content, suggesting a direct correlation between the surface and overall compositions of the nanoparticles and the absence of synergistic effects. All Au-containing catalysts were highly selective to butenes (>99.9?%). The Au catalysts were stable, whereas the Au-Ag catalysts lost about half of their activity during 20?h run time at 200?°C, but the initial activity was restored by a consecutive oxidation-reduction treatment. Near ambient pressure x-ray photoelectron spectroscopy showed that exposure to H2 at elevated temperatures led to a gradual enrichment of the surface of the Au-Ag nanoparticles by Ag. These observations highlight the importance of considering progressive atomic rearrangements in bimetallic nanocatalysts under reaction conditions.

| S-EPMC6099385 | biostudies-literature

Eco-Friendly Synthesis of SnO2-Cu Nanocomposites and Evaluation of Their Peroxidase Mimetic Activity.

Project description:The enzyme mimetic activity of nanomaterials has been applied in colorimetric assays and point-of-care diagnostics. Several nanomaterials have been exploited for their peroxidase mimetic activity toward 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide. However, an efficient nanomaterial for the rapid and strong oxidation of TMB remains a strategic challenge. Therefore, in this study, we developed copper-loaded tin oxide (SnO2-Cu) nanocomposites that rapidly oxidize TMB. These nanocomposites have strong absorption at 650 nm and can be used for highly sensitive colorimetric detection. An environmentally friendly (green), rapid, easy, and cost-effective method was developed for the synthesis of these nanocomposites, which were characterized using ultraviolet-visible, energy-dispersive X-ray, and Fourier-transform infrared spectroscopy, as well as scanning electron microscopy. This is the first green synthesis of SnO2-Cu nanocomposites. Their enzyme mimetic activity, which was first studied here, was found to be strongly dependent on the temperature and pH value of the solution. The synthesized nanocomposites have the advantages of low cost, high stability, and ease of preparation for enzyme mimetic applications. Hence, SnO2-Cu nanocomposites are a promising alternative to peroxidase enzymes in colorimetric point-of-care diagnostics.

| S-EPMC8308257 | biostudies-literature

Theoretical study of the structures of bimetallic Ag-Au and Cu-Au clusters up to 108 atoms.

Project description:The stable structures of Ag-Au and Cu-Au clusters with 1 : 1, 1 : 3 and 3 : 1 compositions with up to 108 atoms are obtained using a modified adaptive immune optimization algorithm with Gupta potential. The dominant motifs of Ag-Au and Cu-Au clusters are decahedron and icosahedron, respectively. However, in Ag-rich Ag-Au clusters, more icosahedra are found, and in Cu-rich Cu-Au clusters, there exist several decahedral motifs. Four Leary tetrahedral motifs are predicted. CucoreAushell configurations are predicted in Cu-Au clusters. In Ag-Au clusters, most Ag atoms are on the surface, but partial ones are located in the inner shell, while Au atoms are interconnected in the middle shell.

| S-EPMC6731704 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data