Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Heterostructures of CuO and SnO_x for NO₂ Detection.

ABSTRACT: Controlling environmental pollution is a burning problem for all countries more than ever. Currently, due to the increasing industrialization, the number of days when the limits of air pollutants are over the threshold levels exceeds 80-85% of the year. Therefore, cheap and effective sensors are always welcome. One idea is to combine such solutions with cars and provide real-time information about the current pollution level. However, the environmental conditions are demanding, and thus the developed sensors need to be characterized by the high 3S parameters: sensitivity, stability and selectivity. In this paper, we present the results on the heterostructure of CuO/SnO_x and SnO_x/CuO as a possible approach for selective NO₂ detection. The developed gas sensors exhibited lower operating temperature and high response in the wide range of NO₂ and in a wide range of relative humidity changes. Material characterizations and impedance spectroscopy measurements were also conducted to analyze the chemical and electrical behavior.

SUBMITTER: Paleczek A

PROVIDER: S-EPMC8272026 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Heterostructural CuO-ZnO Nanocomposites: A Highly Selective Chemical and Electrochemical NO2 Sensor.

Project description:A simple one-step chemical method is employed for the successful synthesis of CuO(50%)-ZnO(50%) nanocomposites (NCs) and investigation of their gas sensing properties. The X-ray diffraction studies revealed that these CuO-ZnO NCs display a hexagonal wurtzite-type crystal structure. The average width of 50-100 nm and length of 200-600 nm of the NCs were confirmed by transmission electron microscopic images, and the 1:1 proportion of Cu and Zn composition was confirmed by energy-dispersive spectra, i.e., CuO(50%)-ZnO(50%) NC studies. The CuO(50%)-ZnO(50%) NCs exhibit superior gas sensing performance with outstanding selectivity toward NO2 gas at a working temperature of 200 °C. Moreover, these NCs were used for the indirect evaluation of NO2 via electrochemical detection of NO2 - (as NO2 converts into NO2 - once it reacts with moisture, resulting into acid rain, i.e., indirect evaluation of NO2). As compared with other known modified electrodes, CuO(50%)-ZnO(50%) NCs show an apparent oxidation of NO2 - with a larger peak current for a wider linear range of nitrite concentration from 20 to 100 mM. We thus demonstrate that the as-synthesized CuO(50%)-ZnO(50%) NCs act as a promising low-cost NO2 sensor and further confirm their potential toward tunable gas sensors (electrochemical and solid state) (Scheme 1).

| S-EPMC6893959 | biostudies-literature

2H-SnS2 assembled with petaloid 1T@2H-MoS2 nanosheet heterostructures for room temperature NO2 gas sensing.

Project description:In this study, we explored the gas-sensing capabilities of MoS2 petaloid nanosheets in the metallic 1T phase with the commonly investigated semiconducting 2H phase. By synthesizing SnS2 nanoparticles and MoS2 petaloid nanosheets through a hydrothermal method, we achieve notable sensing performance for NO2 gas at room temperature (27 °C). This investigation represents a novel study, and to the best of our knowledge no, prior similar investigations have been reported in the literature for 1T@2HMoS2/SnS2 heterostructures for room temperature NO2 gas sensing. The formed heterostructure between SnS2 nanoparticles and petaloid MoS2 nanosheets exhibits synergistic effects, offering highly active sites for NO2 gas adsorption, consequently enhancing sensor response. Our sensor demonstrated a remarkable sensing response (Ra/Rg = 7.49) towards 1 ppm of NO2, rapid response time of 54 s, baseline recovery in 345 s, good selectivity and long-term stability, underscoring its potential for practical gas-sensing applications.

| S-EPMC11293367 | biostudies-literature

Underpinning the Interaction between NO2 and CuO Nanoplatelets at Room Temperature by Tailoring Synthesis Reaction Base and Time.

Project description:An approach to tailor the morphology and sensing characteristics of CuO nanoplatelets for selective detection of NO2 gas is of great significance and an important step toward achieving the challenge of improving air quality and in assuring the safety of mining operations. As a result, in this study, we report on the NO2 room temperature gas-sensing characteristics of CuO nanoplatelets and the underlying mechanism toward the gas-sensing performance by altering the synthesis reaction base and time. High sensitivity of ?40 ppm-1 to NO2 gas at room temperature has been realized for gas sensors fabricated from CuO nanoplatelets, using NaOH as base for reaction times of 45 and 60 min, respectively at 75 °C. In both cases, the crystallite size, surface area, and hole concentration of the respective materials influenced the selectivity and sensitivity of the NO2 gas sensors. The mechanism underpinning the superior NO2 gas sensing are thoroughly discussed in terms of the crystallite size, hole concentration, and surface area as active sites for gas adsorption.

| S-EPMC6843718 | biostudies-literature

NO2 study

Project description:NO effects on gene expression, independent of cGMP, were examined globally. Differentiated human U937 cells that lack soluble guanylate cyclase were exposed to Snitrosoglutathione, a NO donor, or glutathione without or with dibutyryl-cAMP (Bt2cAMP). NO regulated 110 transcripts that annotated disproportionately to the cell cycle and cell proliferation (47/110, 43%) and more frequently than expected contained AU-rich, post-transcriptional regulatory elements (ARE). Bt2cAMP regulated 106 genes; cell cycle gene enrichment did not reach significance. Like NO, Bt2cAMP was associated with ARE-containing transcripts. Cell cycle genes induced by NO were G1/S phase associated (7/8) including E2F1 and p21/Waf1/Cip1; 6 of these 7 were E2F target genes involved in G1/S transition. Repressed genes were G2/M associated (24/27); 8 of 27 were known targets of p21. E2F1 mRNA and protein were increased by NO, as was E2F1 binding to E2F promoter elements. NO activated p38 MAPK, stabilizing p21 mRNA and increasing p21 protein. Subsequent increases in protein binding to CDE/CHR sites repressed key G2/M phase genes and increased the proportion of cells in G2/M. Thus, NO triggers a specific and coordinated program of cell cycle arrest independent of cGMP. Stress kinase pathways and mRNA stability are major mechanisms by which NO regulates the transcriptome. Keywords: other

2006-02-15 | GSE2649 | GEO

Detection of Organophosphorous Chemical Agents with CuO-Nanorod-Modified Microcantilevers.

Project description:Microcantilevers are really promising sensitive sensors despite their small surface. In order to increase this surface and consequently their sensitivity, we nanostructured them with copper oxide (CuO) nanorods. The synthesis of the nanostructure consists of the oxidation of a copper layer deposited beforehand on the surface of the sample. The oxidation is performed in an alkaline solution containing a mixture of Na(OH) and (NH4)2S2O8. The synthesis procedure was first optimized on a silicon wafer, then transferred to optical cantilever-based sensors. This transfer requires specific synthesis modifications in order to cover all the cantilever with nanorods. A masking procedure was specially developed and the copper layer deposition was also optimized. These nanostructured cantilevers were engineered in order to detect vapors of organophosphorous chemical warfare agents (CWA). The nanostructured microcantilevers were exposed to various concentration of dimethyl methylphosphonate (DMMP) which is a well-known simulant of sarin (GB). The detection measurements showed that copper oxide is able to detect DMMP via hydrogen interactions. The results showed also that the increase of the microcantilever surface with the nanostructures improves the sensors efficiency. The evolution of the detection performances of the CuO nanostructured cantilevers with the DMMP concentration was also evaluated.

| S-EPMC7070513 | biostudies-literature

Collaborative Enhancement of Humidity Sensing Performance by KCl-Doped CuO/SnO<sub>2</sub> p-n Heterostructures for Monitoring Human Activities.

Project description:In this study, a high-performance humidity sensor based on KCl-doped CuO/SnO2 p-n heterostructures was fabricated by a ball milling-roasting method. The morphology and nanostructure of the fabricated KCl-CuO/SnO2 composite were characterized by scanning electron microscopy, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, and nitrogen sorption analysis. The results showed that the humidity sensor had a high sensitivity of 194 kΩ/%RH, short response and recovery times of 1.0 and 1.5 s, a low hysteresis value, and good repeatability. The energy band structure and complex impedance spectrum of the KCl-CuO/SnO2 composite indicated that the excellent humidity sensing performance originated from the ionic conductivity of KCl, the formation of heterojunctions, the change in the Schottky barrier height, and the depletion of electronic depletion layers. The KCl-CuO/SnO2 sensor has great potential in respiratory monitoring, noncontact sensing of finger moisture, and environmental monitoring.

| S-EPMC9909783 | biostudies-literature

Trace Cd2+ Ions Detection on the Flower-Like Ag@CuO Substrate.

Project description:CuO flower-like material (FM) was prepared via the facile hydrothermal method, and Ag nanoparticles were deposited on the CuO FM to obtain Ag@CuO composite. Rhodamine 6G (R6G) was used as the probe molecule on Ag@CuO FM substrate to study surface enhanced Raman scattering (SERS). It is discovered that it exhibited an excellent SERS performance with limit of detection of 3.58 × 10-16 M and enhancement factor (EF) of 3.99 × 1010. More importantly, we used it as a SERS substrate to detect cadmium ions and found that its limit of detection (LOD) reaches up to 2.6 × 10-8 M, which is lower than the highest allowable Cd2+ concentration in drinking water set by the World Health Organization (WHO) and Environmental Protection Agency (EPA). Therefore, the proposed composite can be applicable to the detection of Cd2+ in drinking water and in soil.

| S-EPMC7558543 | biostudies-literature

CuO-Ga2O3 Thin Films as a Gas-Sensitive Material for Acetone Detection.

Project description:The p-n heterostructures of CuO-Ga2O3 obtained by magnetron sputtering technology in a fully reactive mode (deposition in pure oxygen) were tested under exposure to low acetone concentrations. After deposition, the films were annealed at previously confirmed conditions (400 °C/4 h/synthetic air) and further investigated by utilization of X-ray diffraction (XRD), X-ray reflectivity (XRR), energy-dispersive X-ray spectroscopy (EDS). The gas-sensing behavior was tested in the air/acetone atmosphere in the range of 0.1-1.25 ppm, as well as at various relative humidity (RH) levels (10-85%). The highest responses were obtained for samples based on the CuO-Ga2O3 (4% at. Ga).

| S-EPMC7309060 | biostudies-literature

Paraglaciecola agarilytica NO2

Project description:draft genome of Glaciecola agarilytica NO2

| PRJDB23 | ENA

Negatively-Doped Single-Walled Carbon Nanotubes Decorated with Carbon Dots for Highly Selective NO2 Detection.

Project description:In this study, we demonstrated a highly selective chemiresistive-type NO2 gas sensor using facilely prepared carbon dot (CD)-decorated single-walled carbon nanotubes (SWCNTs). The CD-decorated SWCNT suspension was characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), and UV-visible spectroscopy, and then spread onto an SiO2/Si substrate by a simple and cost-effective spray-printing method. Interestingly, the resistance of our sensor increased upon exposure to NO2 gas, which was contrary to findings previously reported for SWCNT-based NO2 gas sensors. This is because SWCNTs are strongly doped by the electron-rich CDs to change the polarity from p-type to n-type. In addition, the CDs to SWCNTs ratio in the active suspension was critical in determining the response values of gas sensors; here, the 2:1 device showed the highest value of 42.0% in a sensing test using 4.5 ppm NO2 gas. Furthermore, the sensor selectively responded to NO2 gas (response ~15%), and to other gases very faintly (NO, response ~1%) or not at all (CO, C6H6, and C7H8). We propose a reasonable mechanism of the CD-decorated SWCNT-based sensor for NO2 sensing, and expect that our results can be combined with those of other researches to improve various device performances, as well as for NO2 sensor applications.

| S-EPMC7764981 | biostudies-literature