Dataset Information

Solidified floating organic droplet microextraction coupled with HPLC for rapid determination of trans, trans muconic acid in benzene biomonitoring.

ABSTRACT: Benzene is one of the carcinogenic compounds in the work environments. Exposure assessment of benzene through biological monitoring is an acceptable way to accurately measure the real exposure in order to conducting the health risk assessment, but it is always complicated, laborious, time consuming and costly process. A new sensitive, simple, fast and environmental friendly method was developed for the determination of urinary metabolite of benzene, trans trans muconic acid (t,t-MA) by dispersive liquid-liquid micro extraction based on solidification of floating organic droplet coupled with high-performance liquid chromatography with ultra violet detector. Central composite design methodology was utilized to evaluate the effective factors on the extraction output of the target metabolite. The calibration curve was plotted in the concentration ranges of 0.02-5 µg mL^-1. The precision and accuracy of the method were assayed via the relative standard deviation (RSD%) and relative recovery (RR%) using spiked samples with three replications. The RR% and RSD% of the optimized method were 86.9-91.3% and 4.3-6.3% respectively. The limit of detection (LOD) of the method was 0.006 µg mL^-1. The level of t,t-MA in real samples was ranged from 0.54 to 1.64 mg/g creatinine. We demonstrated that t,t-MA can be extracted and determined by an inexpensive, simple and fast method.

SUBMITTER: Dehghani F

PROVIDER: S-EPMC8333051 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Droplet microfluidics are characterized by the generation and manipulation of discrete volumes of solutions, generated with the use of immiscible phases. Those droplets can then be controlled, transported, analyzed or their content modified. In this wide droplet microfluidic toolbox, no means are available to generate, in a controlled manner, droplets co-encapsulating to aqueous phases. Indeed, current methods rely on random co-encapsulation of two aqueous phases during droplet generation or the merging of two random droplets containing different aqueous phases. In this study, we present a novel droplet microfluidic device to reliably and efficiently co-encapsulate two different aqueous phases in micro-droplets. In order to achieve this, we combined existing droplet microfluidic modules in a novel way. The different aqueous phases are individually encapsulated in droplets of different sizes. Those droplet populations are then filtered in order to position each droplet type towards its adequate trapping compartment in traps of a floating trap array. Single droplets, each containing a different aqueous phase, are thus paired and then merged. This pairing at high efficiency is achieved thanks to a unique combination of floating trap arrays, a droplet railing system and a droplet size-based filtering mechanism. The microfluidic chip design presented here provides a filtering threshold with droplets larger than 35 μm (big droplets) being deviated to the lower rail while droplets smaller than 20 μm (small droplets) remain on the upper rail. The effects of the rail height and the distance between the two (upper and lower) rails were investigated. The optimal trap dimensions provide a trapping efficiency of 100% for small and big droplets with a limited double trapping (both compartments of the traps filled with the same droplet type) of 5%. The use of electrocoalescence enables the generation of a droplet while co-encapsulating two aqueous phases. Using the presented microfluidic device libraries of 300 droplets, dual aqueous content can be generated in less than 30 min.

Dataset Information

Solidified floating organic droplet microextraction coupled with HPLC for rapid determination of trans, trans muconic acid in benzene biomonitoring.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets