Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Hybrid Copolymerization of Ethylene Oxide and tert-Butyl Methacrylate with Organocatalyst.

ABSTRACT: Hybrid copolymerization of structurally different, reactivity and mechanism distinct monomers (e.g., cyclic and vinyl type monomers) is of great interest and challenge for both academic research and practical application. Herein, ethylene oxide-co-tert-butyl methacrylate-co-poly(ethylene glycol) benzyl methacrylate (EO-co-BMA-co-bPEO), a statistical copolymer was synthesized via hybrid copolymerization of EO and BMA using an uncharged, non-nucleophilic organobase t-BuP₄ as the catalyst. Detailed characterizations indicate that hybrid copolymerization of ethylene oxide and vinyl monomer forms a statistical copolymer concurrently with the transesterification of tert-butyl group and oligomer PEO anions. The application of the copolymer as all solid lithium-ion battery polymer electrolyte was investigated by detecting the ionic conductivity (σ) with electrical impedance spectrum measurement.

SUBMITTER: Xiao W

PROVIDER: S-EPMC8347643 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Effect of Graphene oxide or Functionalized Graphene Oxide on the Copolymerization Kinetics of Styrene/n-butyl Methacrylate.

Project description:Nanocomposite materials based on copolymers of styrene and n-butyl methacrylate with either graphene oxide (GO) or functionalized graphene oxide (F-GO) were synthesized using the in-situ bulk radical copolymerization technique. Reaction kinetics was studied both experimentally and theoretically using a detailed kinetic model also taking into account the effect of diffusion-controlled phenomena on the reaction kinetic rate constants. It was found that the presence of GO results in lower polymerization rates accompanied by the synthesis of copolymers having higher average molecular weights. In contrast, the presence of F-GO did not seem to significantly alter the conversion vs time curves, whereas it results in slightly lower average molecular weights. The first observation was attributed to side reactions of the initiator primary radicals with the hydroxyl groups on the surface of GO, resulting in lower initiator efficiency, whereas the second to grafted structures formed from copolymer macromolecules on the F-GO surface. The copolymerization model predictions including MWD data were found to be in satisfactory agreement with the experimental data. At least four adjustable parameters were employed and their best-fit values were provided.

| S-EPMC6630914 | biostudies-literature

Solvent Effects on Radical Copolymerization Kinetics of 2-Hydroxyethyl Methacrylate and Butyl Methacrylate.

Project description:2-Hydroxyethyl methacrylate (HEMA) is an important component of many acrylic resins used in coatings formulations, as the functionality ensures that the chains participate in the cross-linking reactions required to form the final product. Hence, the knowledge of their radical copolymerization kinetic coefficients is vital for both process and recipe improvements. The pulsed laser polymerization (PLP) technique is paired with size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) to provide kinetic coefficients for the copolymerization of HEMA with butyl methacrylate (BMA) in various solvents. The choice of solvent has a significant impact on both copolymer composition and on the composition-averaged propagation rate coefficient (kp,cop). Compared to the bulk system, both n-butanol and dimethylformamide reduce the relative reactivity of HEMA during copolymerization, while xylene as a solvent enhances HEMA reactivity. The magnitude of the solvent effect varies with monomer concentration, as shown by a systematic study of monomer/solvent mixtures containing 50 vol%, 20 vol%, and 10 vol% monomer. The observed behavior is related to the influence of hydrogen bonding on monomer reactivity, with the experimental results fit using the terminal model of radical copolymerization to provide estimates of reactivity ratios and kp,HEMA.

| S-EPMC6474149 | biostudies-literature

Hybrid Mesoporous Silica Nanoparticles Grafted with 2-(tert-butylamino)ethyl Methacrylate-b-poly(ethylene Glycol) Methyl Ether Methacrylate Diblock Brushes as Drug Nanocarrier.

Project description:This paper introduces the synthesis of well-defined 2-(tert-butylamino)ethyl methacrylate-b-poly(ethylene glycol) methyl ether methacrylate diblock copolymer, which has been grafted onto mesoporous silica nanoparticles (PTBAEMA-b-PEGMEMA-MSNs) via atom transfer radical polymerization (ATRP). The ATRP initiators were first attached to the MSN surfaces, followed by the ATRP of 2-(tert-butylamino)ethyl methacrylate (PTBAEMA). CuBr2/bipy and ascorbic acid were employed as the catalyst and reducing agent, respectively, to grow a second polymer, poly(ethylene glycol) methyl ether methacrylate (PEGMEMA). The surface structures of these fabricated nanomaterials were then analyzed using Fourier Transform Infrared (FTIR) spectroscopy. The results of Thermogravimetric Analysis (TGA) show that ATRP could provide a high surface grafting density for polymers. Dynamic Light Scattering (DLS) was conducted to investigate the pH-responsive behavior of the diblock copolymer chains on the nanoparticle surface. In addition, multifunctional pH-sensitive PTBAEMA-b-PEGMEMA-MSNs were loaded with doxycycline (Doxy) to study their capacities and long-circulation time.

| S-EPMC6983194 | biostudies-literature

Tris(4-tert-butyl-phen-yl)phosphine oxide.

Project description:In the title compound, C(30)H(39)OP, the P=O bond length is 1.4866?(12)?Å and the P-C bond lengths range from 1.804?(2) to 1.808?(13)?Å. The molecle is located on a crystallographic mirror plane. The methyl groups of one tert-butyl group are disordered over two sites in a 0.776?(4):0.224?(4) ratio.

| S-EPMC2980249 | biostudies-literature

Crystal structure of tert-butyl-diphenyl-phosphine oxide.

Project description:In the structure of the title triorganophosphine oxide, C16H19OP, the P-O bond is 1.490 (1) Å. The P atom has a distorted tetrahedral geometry. The O atom inter-acts with both phenyl groups of a neighboring mol-ecule [C⋯O = 2.930 (3) and 2.928 (4) Å]. The C-O interaction directs an extended supramolecular arrangement along the a-axis.

| S-EPMC4459331 | biostudies-literature

Bis(formylphenolato)cobalt(II)-Mediated Alternating Radical Copolymerization of tert-Butyl 2-Trifluoromethylacrylate with Vinyl Acetate.

Project description:The organometallic-mediated radical polymerization (OMRP) of vinyl acetate (VAc) and its OMR copolymerization (OMRcoP) with tert-butyl 2-trifluoromethylacrylate (MAF-TBE) mediated by Co(SAL)₂ (SAL = 2-formylphenolato or deprotonated salicylaldehyde) produced relatively well-defined PVAc and poly(VAc-alt-MAF-TBE) copolymers at moderate temperature (<40 °C) in bulk. The resulting alternating copolymer was characterized by ¹H-, 13C- and 19F-nuclear magnetic resonance (NMR) spectroscopies, and by size exclusion chromatography. The linear first-order kinetic plot, the linear evolutions of the molar mass with total monomer conversion, and the relatively low dispersity (Đ~1.55) of the resulting copolymers suggest that this cobalt complex provides some degree of control over the copolymerization of VAc and MAF-TBE. Compared to the previously investigated cobalt complex OMRP mediators having a fully oxygen-based first coordination sphere, this study emphasizes a few peculiarities of Co(SAL)₂: a lower ability to trap radical chains as compared to Co(acac)₂ and the absence of catalytic chain transfer reactions, which dominates polymerizations carried in the presence of 9-oxyphenalenone cobalt derivative.

| S-EPMC6418862 | biostudies-literature

N-[2-(2-Methoxyphenyl)benzylidene]-tert-butyl-amine N-oxide.

Project description:In the mol-ecule of the title compound, C(18)H(21)NO(2), the two benzene rings are oriented at a dihedral angle of 58.19?(3)°. Intra-molecular C-H?O hydrogen bonds result in the formation of one six- and one five-membered ring, which adopt twist and envelope conformations, respectively. In the crystal structure, C-H?O hydrogen bonds link the mol-ecules.

| S-EPMC2961506 | biostudies-literature

Dichloridobis(di-tert-butyl-methyl-phosphine oxide-?O)diphenyl-tin(IV).

Project description:The complete mol-ecule of the title compound, [Sn(C(6)H(5))(2)Cl(2)(C(9)H(21)OP)(2)], is generated by crystallographic inversion symmetry, the Sn atom is located on a special position of site symmetry . The Sn atom adopts an all-trans SnC(2)O(2)Cl(2) octa-hedral geometry. As a consequence of the bulky substituents at the O atom, the P-O-Sn bond angle is 163.9?(3)°.

| S-EPMC2961504 | biostudies-literature

Fluoride releasing in polymer blends of poly(ethylene oxide) and poly(methyl methacrylate)

Project description: Not available

| S-EPMC10884178 | biostudies-literature

(R)-N-{2-tert-Butyl-2-[(R)-tert-butyl-sulfonamido]ethylidene}-tert-butane-sulfonamide.

Project description:The title compound, C(14)H(30)N(2)O(2)S(2), is the product of the monoaddition reaction of tert-butyl magnesium chloride with bis-[(R)-N-tert-butanesulfinyl]ethanediimine. There are two almost identical mol-ecules in the asymmetric unit, the mol-ecular conformation of which is stabilized by an intra-molecular N-H?N hydrogen bond.

| S-EPMC2959383 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data