Heterojunction structures for reduced noise in large-area and sensitive perovskite x-ray detectors.
Ontology highlight
ABSTRACT:
SUBMITTER: Zhou Y
PROVIDER: S-EPMC8442865 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:This work reports on a compositionally graded heterojunction for photovoltaic application by cooperating fluorine-doped carbon quantum dots (FCQDs in short) into the CsPbI2.5Br0.5 inorganic perovskite layer. Using this CsPbI2.5Br0.5/FCQDs graded heterojunction in conjunction with low-temperature-processed carbon electrode, a power conversion efficiency of 13.53% for 1 cm2 all-inorganic perovskite solar cell can be achieved at AM 1.5G solar irradiation. To the best of our knowledge, this is one of the highest efficiency reported for carbon electrode based all-inorganic perovskite solar cells so far, and the first report of 1 cm2 carbon counter electrode based inorganic perovskite solar cell with PCE exceeding 13%. Moreover, the inorganic perovskite/carbon quantum dot graded heterojunction photovoltaics maintained over 90% of their initial efficiency after thermal aging at 85° for 1056 hours. This conception of constructing inorganic perovskite/FCQDs graded heterojunction offers a feasible pathway to develop efficient and stable photovoltaics for scale-up and practical applications.
| S-EPMC8292841 | biostudies-literature
Project description:X-ray detectors play a pivotal role in development and advancement of humankind, from far-reaching impact in medicine to furthering the ability to observe distant objects in outer space. While other electronics show the ability to adapt to flexible and lightweight formats, state-of-the-art X-ray detectors rely on materials requiring bulky and fragile configurations, severely limiting their applications. Lead halide perovskites is one of the most rapidly advancing novel materials with success in the field of semiconductor devices. Here, an ultraflexible, lightweight, and highly conformable passively operated thin film perovskite X-ray detector with a sensitivity as high as 9.3 ± 0.5 µC Gy-1 cm-2 at 0 V and a remarkably low limit of detection of 0.58 ± 0.05 ?Gy s-1 is presented. Various electron and hole transporting layers accessing their individual impact on the detector performance are evaluated. Moreover, it is shown that this ultrathin form-factor allows for fabrication of devices detecting X-rays equivalently from front and back side.
| S-EPMC7740104 | biostudies-literature
Project description:X-ray radiography is the most widely used imaging technique with applications encompassing medical and industrial imaging, homeland security, and materials research. Although a significant amount of research and development has gone into improving the spatial resolution of the current state-of-the-art indirect X-ray detectors, it is still limited by the detector thickness and microcolumnar structure quality. This paper demonstrates high spatial resolution X-ray imaging with solution-processable two-dimensional hybrid perovskite single-crystal scintillators grown inside microcapillary channels as small as 20 µm. These highly scalable non-hygroscopic detectors demonstrate excellent spatial resolution similar to the direct X-ray detectors. X-ray imaging results of a camera constructed using this scintillator show Modulation Transfer Function values significantly better than the current state-of-the-art X-ray detectors. These structured detectors open up a new era of low-cost large-area ultrahigh spatial resolution high frame rate X-ray imaging with numerous applications.
| S-EPMC8613224 | biostudies-literature
Project description:Metal halide perovskites (MHPs) have demonstrated excellent performances in detection of X-rays and gamma-rays. Most studies focus on improving the sensitivity of single-pixel MHP detectors. However, little work pays attention to the dark current, which is crucial for the back-end circuit integration. Herein, the requirement of dark current is quantitatively evaluated as low as 10-9 A/cm2 for X-ray imagers integrated on pixel circuits. Moreover, through the semiconductor device analysis and simulation, we reveal that the main current compositions of thick perovskite X-ray detectors are the thermionic-emission current (JT) and the generation-recombination current (Jg-r). The typical observed failures of p-n junctions in thick detectors are caused by the high generation-recombination current due to the band mismatch and interface defects. This work provides a deep insight into the design of high sensitivity and low dark current perovskite X-ray detectors.
| S-EPMC9756221 | biostudies-literature
Project description:A variety of medical, industrial, and scientific applications requires highly sensitive and cost-effective x-ray detectors for photon energies ranging from keV to MeV. Adapting the thickness of polycrystalline or single crystal conversion layers especially to high-energy applications increases the complexity of fabrication and potentially decreases the performance of conventional direct conversion x-ray detectors. To tackle the challenges with respect to the active layer thickness and to combine the superior performance of single crystal materials with the low-cost nature of polycrystalline conversion layers, we investigate thin film x-ray detector technologies based on a folded device architecture. Analytical models simulating the sensitivity and the detective quantum efficiency (DQE) are used to evaluate the performance of folded detectors based on polycrystalline organic-inorganic perovskite semiconductors in various layout configurations and for different photon energies. Simulations of folded perovskite devices show high sensitivities. The DQE analysis introduces additional noise related boundary conditions for the folding length. A comparison with conventional detectors based on state of the art conversion materials at different photon energies demonstrates the potential of the folded detector layout as simulated sensitivities are comparable to single crystal detectors.
| S-EPMC6435812 | biostudies-literature
Project description:X-ray detection limit and sensitivity are important figure of merits for perovskite X-ray detectors, but literatures lack a valid mathematic expression for determining the lower limit of detection for a perovskite X-ray detector. In this work, we present a thorough analysis and new method for X-ray detection limit determination based on a statistical model that correlates the dark current and the X-ray induced photocurrent with the detection limit. The detection limit can be calculated through the measurement of dark current and sensitivity with an easy-to-follow practice. Alternatively, the detection limit may also be obtained by the measurement of dark current and photocurrent when repeatedly lowering the X-ray dose rate. While the material quality is critical, we show that the device architecture and working mode also have a significant influence on the sensitivity and the detection limit. Our work establishes a fair comparison metrics for material and detector development.
| S-EPMC8421435 | biostudies-literature
Project description:Perovskite materials have demonstrated superior performance in many aspects of optoelectronic applications including X-ray scintillation, photovoltaic, photodetection, and so on. In this work, we demonstrate a self-powered flexible all-perovskite X-ray detector with high sensitivity and fast response, which can be realized by integrating CsPbBr3 perovskite nanocrystals (PNCs) as the X-ray scintillator with a CH3NH3PbI3 perovskite photodetector. The PNCs scintillator exhibits ultra-fast light decay of 2.81 ns, while the perovskite photodetector gives a fast response time of ∼0.3 μs and high-specific detectivity of ∼2.4×1012 Jones. The synergistic effect of these two components ultimately leads to a self-powered flexible all-perovskite X-ray detector that delivers high sensitivity of 600-1,270 μC/mGyaircm3 under X-ray irradiation and fast radiation-to-current response time.
| S-EPMC8365385 | biostudies-literature
Project description:We developed a new concept of X- and ?-ray radiation semiconductor detectors based on a large area graphene/semi-insulating single crystal CdTe Schottky-type heterojunction. These two terminal electronic devices can be easily fabricated by forming a Van der Waals contact between large area chemical vapor deposited graphene and CdTe substrates in air and at room temperature. This approach significantly reduces the fabrication cost and improves the reproducibility and stability of electrical properties. A detailed analysis of their AC and DC electrical properties was carried out in order to determine the width of the space charge region and dominant charge transport mechanisms at reverse bias. The unoptimized graphene/CdTe heterojunction detectors exhibited a promising spectral resolution of 241Am (59?keV) and 137Cs (662?keV) isotope radiation at room temperature.
| S-EPMC6355853 | biostudies-other
Project description:Interest in fast and easy detection of high-energy radiation (x-, γ-rays and neutrons) is closely related to numerous practical applications ranging from biomedicine and industry to homeland security issues. In this regard, crystals of hybrid halide perovskite have proven to be excellent detectors of x- and γ-rays, offering exceptionally high sensitivities in parallel to the ease of design and handling. Here, we demonstrate that by assembling a methylammonium lead tri-bromide perovskite single crystal (CH3NH3PbBr3 SC) with a Gadolinium (Gd) foil, one can very efficiently detect a flux of thermal neutrons. The neutrons absorbed by the Gd foil turn into γ-rays, which photo-generate charge carriers in the CH3NH3PbBr3 SC. The induced photo-carriers contribute to the electric current, which can easily be measured, providing information on the radiation intensity of thermal neutrons. The dependence on the beam size, bias voltage and the converting distance is investigated. To ensure stable and efficient charge extraction, the perovskite SCs were equipped with carbon electrodes. Furthermore, other types of conversion layers were also tested, including borated polyethylene sheets as well as Gd grains and Gd2O3 pellets directly engulfed into the SCs. Monte Carlo N-Particle (MCNP) radiation transport code calculations quantitatively confirmed the detection mechanism herein proposed.
| S-EPMC8405692 | biostudies-literature
Project description:Lead halide perovskites show great potential to be used in wearable optoelectronics. However, obstacles for real applications lie in their instability under light, moisture and temperature stress, noxious lead ions leakage and difficulties in fabricating uniform luminescent textiles at large scale and high production rates. Overcoming these obstacles, we report simple, high-throughput electrospinning of large-area (> 375 cm2) flexible perovskite luminescent textiles woven by ultra-stable polymer@perovskite@cyclodextrin@silane composite fibers. These textiles exhibit bright and narrow-band photoluminescence (a photoluminescence quantum yield of 49.7%, full-width at half-maximum <17 nm) and the time to reach 50% photoluminescence of 14,193 h under ambient conditions, showcasing good stability against water immersion (> 3300 h), ultraviolet irradiation, high temperatures (up to 250 °C) and pressure surge (up to 30 MPa). The waterproof PLTs withstood fierce water scouring without any detectable leaching of lead ions. These low-cost and scalable woven PLTs enable breakthrough application in marine rescue.
| S-EPMC9842651 | biostudies-literature