Browse
Submit Data
Databases
API
Help

Dataset Information

9 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Silica gel and microwave-promoted synthesis of dihydropyrrolizines and tetrahydroindolizines from enaminones

ABSTRACT: A wide range of N-(ethoxycarbonylmethyl)enaminones, prepared by the Eschenmoser sulfide contraction between N-(ethoxycarbonylmethyl)pyrrolidine-2-thione and various bromomethyl aryl and heteroaryl ketones, underwent cyclization in the presence of silica gel to give ethyl 6-(hetero)aryl-2,3-dihydro-1H-pyrrolizine-5-carboxylates within minutes upon microwave heating in xylene at 150 °C. Instead of functioning as a nucleophile, the enaminone acted as an electrophile at its carbonyl group during the cyclization. Yields of the bicyclic products were generally above 75%. The analogous microwave-assisted reaction to produce ethyl 2-aryl-5,6,7,8-tetrahydroindolizine-3-carboxylates from (E)-ethyl 2-[2-(2-oxo-2-arylethylidene)piperidin-1-yl]acetates failed in nonpolar solvents, but occurred in ethanol at lower temperature and microwave power, although requiring much longer time. A possible mechanism for the cyclization is presented, and further functionalization of the newly created pyrrole ring in the dihydropyrrolizine core is described.

SUBMITTER: Klintworth R

PROVIDER: S-EPMC8551872 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ultrasound and Microwave-Assisted Synthesis of Hexagonally Ordered Ce-Promoted Mesoporous Silica as Ni Supports for Ethanol Steam Reforming.

Project description:Solvothermal synthesis of mesoporous materials based on amphiphilic molecules as structure-directing agents can be enhanced using non-conventional technologies for stirring and thermal activation. Here, we disclose a green synthesis approach for the preparation of cerium-modified hexagonally ordered silica sieves. Ultrasound micromixing enabled us to obtain well-dispersed Ce in the self-assembled silica network and yielded ordered materials with high cerium content (Ce/Si molar ratio = 0.08). Microwave dielectric heating, applied by an innovative open-end coaxial antenna, was used to reduce the overall hydrothermal synthesis time and to improve the surface area and textural properties. These mesoporous materials were used as a Ni catalyst support (10 wt.% metal loading) for the ethanol steam reforming reaction. The new catalysts featured complete ethanol conversion, high H2 selectivity (65%) and better stability, compared to the same catalyst prepared with magnetic stirring and conventional heating. The Ce-promoted silica sieves offered a suitable support for the controlled growth of nanocarbon that does not result in catalyst deactivation or poisoning after 6 h on stream.

| S-EPMC10053107 | biostudies-literature

HFIP-Promoted Bischler Indole Synthesis under Microwave Irradiation.

Project description:1,1,1,3,3,3-Hexafluoropropan-2-ol (HFIP) was found to be effective for the Bischler indole synthesis under microwave irradiation in the absence of a metal catalyst. Under the catalysis of HFIP, a wide range of ?-amino arylacetones were successfully transformed into indole derivatives with moderate to good yields.

| S-EPMC6321335 | biostudies-literature

Microwave-Assisted Synthesis of Fluorescent Pyrido[2,3-b]indolizines from Alkylpyridinium Salts and Enaminones.

Project description:Pyridinium ylides are well recognized as dipoles for cycloaddition reactions. In its turn, the microwave-assisted interaction of N-(cyanomethyl)-2-alkylpyridinium salts with enaminones unexpectedly proceeds as a domino sequence of cycloisomerization and cyclocondensation reactions, instead of a 1,3-dipolar cycloaddition. The reaction takes place in the presence of sodium acetate as base and employs benign solvents. The optical properties of the resulting pyrido[2,3-b]indolizines were studied, showing green light emission with high fluorescence quantum yields.

| S-EPMC7570714 | biostudies-literature

Microwave Assisted Synthesis, Part 1: Rapid Solventless Synthesis of 3-Substituted Coumarins and Benzocoumarins by Microwave Irradiation of the Corresponding Enaminones.

Project description:The reactivity of enaminones toward a variety of reagents under microwave irradiation is reported. The results are compared with traditional solution methods.

| S-EPMC6146883 | biostudies-other

Boron Trifluoride Etherate Promoted Microwave-Assisted Synthesis of Antimalarial Acridones.

Project description:A microwave-assisted, rapid and efficient method using boron trifluoride etherate (BF3.Et2O) for the synthesis of acridones, via an intramolecular acylation of N-phenylanthranilic acid derivatives, has been developed. The reaction proceeds under solvent-free conditions, tolerates a wide range of functional groups, and provides rapid access to a range of acridones in good to excellent yields. Several of the synthesized acridones exhibited potent antimalarial activities against CQ sensitive and multi-drug resistant (MDR) parasites.

| S-EPMC8939876 | biostudies-literature

Tandem Transesterification-Esterification Reactions Using a Hydrophilic Sulfonated Silica Catalyst for the Synthesis of Wintergreen Oil from Acetylsalicylic Acid Promoted by Microwave Irradiation.

Project description:SiO2-SO3H, with a surface area of 115 m2/g and pore volume of 0.38 cm3g-1, and 1.32 mmol H+/g was used as a 20% w/w catalyst for the preparation of methyl salicylate (wintergreen oil or MS) from acetylsalicylic acid (ASA). A 94% conversion was achieved in a microwave reactor over 40 min at 120 °C in MeOH. The resulting crude product was purified by flash chromatography. The catalyst could be reused three times.

| S-EPMC9330306 | biostudies-literature

Solvent-free synthesis of modified pectin compounds promoted by microwave irradiation.

Project description:Microwave-assisted solvent-free modification of pectin was successfully accomplished, consisting in the esterification of several fatty acids by pectin alcoholic functions. The reaction was performed by simply mixing the reagents with a catalytic amount of the inorganic base (potassium carbonate) and irradiating the obtained mixture with microwaves for a short time (3-6 min). The replacement of the traditional heating with a microwave source allowed the development of a new synthetic protocol which provided increased yield of the final products, since it eliminates the small amount of degraded polysaccharide produced during traditional oil bath heating. The desired esters were fully characterized by FT-IR spectroscopy and thermogravimetric analysis.

| S-EPMC6268555 | biostudies-literature

Sol-Gel Synthesis of the Double Perovskite Sr2FeMoO6 by Microwave Technique.

Project description:The effect of microwave radiation on the hydrothermal synthesis of the double perovskite Sr2FeMoO6 has been studied based on a comparison of the particle size and structural characteristics of products from both methods. A temperature, pressure, and pH condition screening was performed, and the most representative results of these are herein presented and discussed. Radiation of microwaves in the hydrothermal synthesis method led to a decrease in crystallite size, which is an effect from the reaction temperature. The particle size ranged from 378 to 318 nm when pH was 4.5 and pressure was kept under 40 bars. According to X-ray diffraction (XRD) results coupled with the size-strain plot method, the product obtained by both synthesis methods (with and without microwave radiation) have similar crystal purity. The Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) techniques showed that the morphology and the distribution of metal ions are uniform. The Curie temperature obtained by thermogravimetric analysis indicates that, in the presence of microwaves, the value was higher with respect to traditional synthesis from 335 K to 342.5 K. Consequently, microwave radiation enhances the diffusion and nucleation process of ionic precursors during the synthesis, which promotes a uniform heating in the reaction mixture leading to a reduction in the particle size, but keeping good crystallinity of the double perovskite. Precursor phases and the final purity of the Sr2FeMoO6 powder can be controlled via hydrothermal microwave heating on the first stages of the Sol-Gel method.

| S-EPMC8305548 | biostudies-literature

Fast nucleation for silica nanoparticle synthesis using a sol-gel method.

Project description:We have developed a method that for the first time allowed us to synthesize silica particles in 20 minutes using a sol-gel preparation. Therefore, it is critically important to understand the synthesis mechanism and kinetic behavior in order to achieve a higher degree of fine tuning ability during the synthesis. In this study, we have employed our ability to modulate the physical nature of the reaction medium from sol-gel to emulsion, which has allowed us to halt the reaction at a particular time; this has allowed us to precisely understand the mechanism and chemistry of the silica polymerization. The synthesis medium is kept quite simple with tetraethyl orthosilicate (TEOS) as a precursor in an equi-volumetric ethanol-water system and with sodium hydroxide as a catalyst. Synthesis is performed under ambient conditions at 20 °C for 20 minutes followed by phasing out of any unreacted TEOS and polysilicic acid chains via their emulsification with supersaturated water. We have also demonstrated that the developed particles with various sizes can be used as seeds for further particle growth and other applications. Luminol, a chemiluminescent molecule, has been entrapped successfully between the layers of silica and was demonstrated for the chemiluminescence of these particles.

| S-EPMC5137187 | biostudies-literature

Synthesis of stable ACC using mesoporous silica gel as a support.

Project description:Stable amorphous calcium carbonate supported by mesoporous silica gel was successfully synthesized. The silica gel support is prepared through the hydrolytic polycondensation of ethyl silicate under suitable conditions. Laser scanning confocal microscopy (LSCM) observations reveal that the morphology of the products is branched with cruciform-like and flower-like structure. Raman spectroscopic analysis and scanning electron microscopy (SEM) observation of the products confirm the combination of stable amorphous calcium carbonate (ACC) nanoparticles and mesoporous silica gel. A possible growth mechanism for the branched structure has been proposed. Results indicate potential application of this work to ACC storage, crystal engineering, biomimetic synthesis, etc.

| S-EPMC4158389 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data