Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Detection of asymptomatic nigrostriatal dopaminergic lesion in rats by exhaled air analysis using carbon nanotube sensors.

ABSTRACT: The ante-mortem diagnosis of Parkinson's disease (PD) still relies on clinical symptoms. Biomarkers could in principle be used for the early detection of PD-related neuronal damage, but no validated, inexpensive, and simple biomarkers are available yet. Here we report on the breath-print of presymptomatic PD in rats, using a model with 50% lesion of dopaminergic neurons in substantia nigra. Exhaled breath was collected from 19 rats (10 lesioned and 9 sham operated) and analyzed using organically functionalized carbon nanotube sensors. Discriminant factor analysis detected statistically significant differences between the study groups and a classification accuracy of 90% was achieved using leave-one-out cross-validation. The sensors' breath-print was supported by determining statistically significant differences of several volatile organic compounds in the breath of the lesioned rats and the sham operated rats, using gas chromatography combined with mass spectrometry. The observed breath-print shows potential for cost-effective, fast, and reliable early PD detection.

SUBMITTER: Tisch U

PROVIDER: S-EPMC3369793 | biostudies-other | 2012 Mar

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Super-stretchable, transparent carbon nanotube-based capacitive strain sensors for human motion detection.

Project description:Realization of advanced bio-interactive electronic devices requires mechanically compliant sensors with the ability to detect extremely large strain. Here, we design a new multifunctional carbon nanotube (CNT) based capacitive strain sensors which can detect strains up to 300% with excellent durability even after thousands of cycles. The CNT-based strain gauge devices exhibit deterministic and linear capacitive response throughout the whole strain range with a gauge factor very close to the predicted value (strictly 1), representing the highest sensitivity value. The strain tests reveal the presented strain gauge with excellent dynamic sensing ability without overshoot or relaxation, and ultrafast response at sub-second scale. Coupling these superior sensing capabilities to the high transparency, physical robustness and flexibility, we believe the designed stretchable multifunctional CNT-based strain gauge may have various potential applications in human friendly and wearable smart electronics, subsequently demonstrated by our prototypical data glove and respiration monitor.

| S-EPMC6505716 | biostudies-literature

In vitro gastrointestinal gas monitoring with carbon nanotube sensors.

Project description:In vitro simulators of the human gastrointestinal (GI) tract are remarkable technological platforms for studying the impact of food on the gut microbiota, enabling continuous and real-time monitoring of key biomarkers. However, comprehensive real-time monitoring of gaseous biomarkers in these systems is required with a cost-effective approach, which has been challenging to perform experimentally to date. In this work, we demonstrate the integration and in-line use of carbon nanotube (CNT)-based chemiresitive gas sensors coated with a thin polydimethylsiloxane (PDMS) membrane for the continuous monitoring of gases within the Simulator of the Human Microbial Ecosystem (SHIME). The findings demonstrate the ability of the gas sensor to continuously monitor the different phases of gas production in this harsh, anaerobic, highly humid, and acidic environment for a long exposure time (16 h) without saturation. This establishes our sensor platform as an effective tool for real-time monitoring of gaseous biomarkers in in vitro systems like SHIME.

| S-EPMC10774382 | biostudies-literature

Machine learning-assisted ammonium detection using zinc oxide/multi-walled carbon nanotube composite based impedance sensors.

Project description:We report a machine learning approach to accurately correlate the impedance variations in zinc oxide/multi walled carbon nanotube nanocomposite (F-MWCNT/ZnO-NFs) to NH4+ ions concentrations. Impedance response of F-MWCNT/ZnO-NFs nanocomposites with varying ZnO:MWCNT compositions were evaluated for its sensitivity and selectivity to NH4+ ions in the presence of structurally similar analytes. A decision-making model was built, trained and tested using important features of the impedance response of F-MWCNT/ZnO-NF to varying NH4+ concentrations. Different algorithms such as kNN, random forest, neural network, Naïve Bayes and logistic regression are compared and discussed. ML analysis have led to identify the most prominent features of an impedance spectrum that can be used as the ML predictors to estimate the real concentration of NH4+ ion levels. The proposed NH4+ sensor along with the decision-making model can identify and operate at specific operating frequencies to continuously collect the most relevant information from a system.

| S-EPMC8692315 | biostudies-literature

Debye screening in single-molecule carbon nanotube field-effect sensors.

Project description:Point-functionalized carbon nanotube field-effect transistors can serve as highly sensitive detectors for biomolecules. With a probe molecule covalently bound to a defect in the nanotube sidewall, two-level random telegraph noise (RTN) in the conductance of the device is observed as a result of a charged target biomolecule binding and unbinding at the defect site. Charge in proximity to the defect modulates the potential (and transmission) of the conductance-limiting barrier created by the defect. In this Letter, we study how these single-molecule electronic sensors are affected by ionic screening. Both charge in proximity to the defect site and buffer concentration are found to affect RTN amplitude in a manner that follows from simple Debye length considerations. RTN amplitude is also dependent on the potential of the electrolyte gate as applied to the reference electrode; at high enough gate potentials, the target DNA is completely repelled and RTN is suppressed.

| S-EPMC3735439 | biostudies-literature

Tuning Selectivity of Fluorescent Carbon Nanotube-Based Neurotransmitter Sensors.

Project description:Detection of neurotransmitters is an analytical challenge and essential to understand neuronal networks in the brain and associated diseases. However, most methods do not provide sufficient spatial, temporal, or chemical resolution. Near-infrared (NIR) fluorescent single-walled carbon nanotubes (SWCNTs) have been used as building blocks for sensors/probes that detect catecholamine neurotransmitters, including dopamine. This approach provides a high spatial and temporal resolution, but it is not understood if these sensors are able to distinguish dopamine from similar catecholamine neurotransmitters, such as epinephrine or norepinephrine. In this work, the organic phase (DNA sequence) around SWCNTs was varied to create sensors with different selectivity and sensitivity for catecholamine neurotransmitters. Most DNA-functionalized SWCNTs responded to catecholamine neurotransmitters, but both dissociation constants (Kd) and limits of detection were highly dependent on functionalization (sequence). Kd values span a range of 2.3 nM (SWCNT-(GC)15 + norepinephrine) to 9.4 μM (SWCNT-(AT)15 + dopamine) and limits of detection are mostly in the single-digit nM regime. Additionally, sensors of different SWCNT chirality show different fluorescence increases. Moreover, certain sensors (e.g., SWCNT-(GT)10) distinguish between different catecholamines, such as dopamine and norepinephrine at low concentrations (50 nM). These results show that SWCNTs functionalized with certain DNA sequences are able to discriminate between catecholamine neurotransmitters or to detect them in the presence of interfering substances of similar structure. Such sensors will be useful to measure and study neurotransmitter signaling in complex biological settings.

| S-EPMC5539566 | biostudies-other

Graphene as a functional layer for semiconducting carbon nanotube transistor sensors.

Project description:Single-walled carbon nanotubes (SWCNTs) hold vast potential for future electronic devices due to their outstanding properties, however covalent functionalization often destroys the intrinsic properties of SWCNTs, thus limiting their full potential. Here, we demonstrate the fabrication of a functionalized graphene/semiconducting SWCNT (T@fG) heterostructured thin film transistor as a chemical sensor. In this structural configuration, graphene acts as an atom-thick, impermeable layer that can be covalently functionalized via facile diazonium chemistry to afford a high density of surface functional groups while protecting the underlying SWCNT network from chemical modification, even during a covalent chemical reaction. As a result, the highly functionalized carbon-based hybrid structure exhibits excellent transistor properties with a carrier mobility and ON/OFF ratio as high as 64 cm2/Vs and 5400, respectively. To demonstrate its use in potential applications, T@fG thin films were fabricated as aqueous ammonium sensors exhibiting a detection limit of 0.25 μM in a millimolar ionic strength solution, which is comparable with state-of-the-art aqueous ammonium nanosensors.

| S-EPMC5754036 | biostudies-literature

Quantification of Nitric Oxide Concentration Using Single-Walled Carbon Nanotube Sensors.

Project description:Nitric oxide (NO), a free radical present in biological systems, can have many detrimental effects on the body, from inflammation to cancer. Due to NO's short half-life, detection and quantification is difficult. The inability to quantify NO has hindered researchers' understanding of its impact in healthy and diseased conditions. Single-walled carbon nanotubes (SWNTs), when wrapped in a specific single-stranded DNA chain, becomes selective to NO, creating a fluorescence sensor. Unfortunately, the correlation between NO concentration and the SWNT's fluorescence intensity has been difficult to determine due to an inability to immobilize the sensor without altering its properties. Through the use of a recently developed sensor platform, systematic studies can now be conducted to determine the correlation between SWNT fluorescence and NO concentration. This paper explains the methods used to determine the equations that can be used to convert SWNT fluorescence into NO concentration. Through the use of the equations developed in this paper, an easy method for NO quantification is provided. The methods outlined in this paper will also enable researchers to develop equations to determine the concentration of other reactive species through the use of SWNT sensors.

| S-EPMC7831316 | biostudies-literature

Nigrostriatal dopaminergic depletion increases static orofacial allodynia.

Project description:BackgroundThis study investigated mesencephalic dopamine depletion effects on static mechanical allodynia (SMA) elicited by chronic constriction of the infraorbitary nerve (CCI-IoN).MethodsDopamine depletion (6-OHDA administration into the medial forebrain bundle) effects on CCI-IoN-induced SMA were explored using behavioral (nocifensive behavior score upon non-noxious stimuli using von Frey filament), pharmacological (bromocriptine injections) and immunohistochemical (PKCγ and pERK1/2) techniques.ResultsThe central dopamine depletion increased significantly the SMA score. Intraperitoneal and intracisternal injections of bromocriptine alleviated the allodynic behavior observed in both CCI-IoN and CCI-IoN + 6-OHDA animal groups. At the cellular level, dopamine depletion induced a significant increase in PKCγ expression in the medullary dorsal horn (MDH) in rat with CCI-IoN + 6-OHDA when compared to sham animals (CCI-IoN only). Similarly, after static non-noxious stimuli, the expression of pain marker proteins pERK1/2 within the MDH revealed significantly a higher number of positive cells in CCI-IoN + 6-OHDA rats when compared to the CCI-IoN group.ConclusionThis study demonstrates that nigrostriatal dopamine depletion exacerbates the neuropathic pain resulting from CCI-IoN. This effect is probably due to an action through descending pain inhibitory systems which increased pain sensitization at the MDH level. It demonstrates also an analgesic effect elicited by D2R activation at the segmental level.

| S-EPMC4757596 | biostudies-literature

Thin and Flexible Carbon Nanotube-Based Pressure Sensors with Ultrawide Sensing Range.

Project description:A scalable electrophoretic deposition (EPD) approach is used to create novel thin, flexible, and lightweight carbon nanotube-based textile pressure sensors. The pressure sensors can be produced using an extensive variety of natural and synthetic fibers. These piezoresistive sensors are sensitive to pressures ranging from the tactile range (<10 kPa), the body weight range (?500 kPa), and very high pressures (?40 MPa). The EPD technique enables the creation of a uniform carbon nanotube-based nanocomposite coating, in the range of 250-750 nm thick, of polyethyleneimine (PEI) functionalized carbon nanotubes on nonconductive fibers. In this work, nonwoven aramid fibers are coated by EPD onto a backing electrode followed by film formation onto the fibers creating a conductive network. The electrically conductive nanocomposite coating is firmly bonded to the fiber surface and shows piezoresistive electrical/mechanical coupling. The pressure sensor displays a large in-plane change in electrical conductivity with applied out-of-plane pressure. In-plane conductivity change results from fiber/fiber contact as well as the formation of a sponge-like piezoresistive nanocomposite "interphase" between the fibers. The resilience of the nanocomposite interphase enables sensing of high pressures without permanent changes to the sensor response, showing high repeatability.

| S-EPMC6286676 | biostudies-literature

Carbon Nanotube Formic Acid Sensors Using a Nickel Bis( ortho-diiminosemiquinonate) Selector.

Project description:Formic acid is corrosive, and a sensitive and selective sensor could be useful in industrial, medical, and environmental settings. We present a chemiresistor for detection of formic acid composed of single-walled carbon nanotubes (CNTs) and nickel bis( ortho-diiminosemiquinonate) (1), a planar metal complex that can act as a ditopic hydrogen-bonding selector. Formic acid is detected in concentrations as low as 83 ppb. The resistance of the material decreases on exposure to formic acid, but slightly increases on exposure to acetic acid. We propose that 1 assists in partial protonation of the CNT by formic acid, but the response toward acetic acid is dominated by inter-CNT swelling. This technology establishes CNT-based chemiresistive discrimination between formic and acetic acid vapors.

| S-EPMC5866241 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data