Application of genetic algorithm to hexagon-based motion estimation.
Ontology highlight
ABSTRACT:
SUBMITTER: Kung CM
PROVIDER: S-EPMC3925528 | biostudies-other | 2014
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Different optimization techniques are used for the training and fine-tuning of feed forward neural networks, for the estimation of STATCOM voltages and reactive powers. In the first part, the paper presents the voltage regulation in IEEE buses using the Static Compensator (STATIC) and discusses efficient ways to solve the power systems featuring STATCOM by load flow equations. The load flow equations are solved using iterative algorithms such as Newton-Raphson method. In the second part, the paper focuses on the use of estimation techniques based on Artificial Neural Networks as an alternative to the iterative methods. Different training algorithms have been used for training the weights of Artificial Neural Networks; these methods include Back-Propagation, Particle Swarm Optimization, Shuffled Frog Leap Algorithm, and Genetic Algorithm. A performance analysis of each of these methods is done on the IEEE bus data to examine the efficiency of each algorithm. The results show that SFLA outperforms other techniques in training of ANN, seconded by PSO.
| S-EPMC5944206 | biostudies-literature
Project description:The stixel world is a simplification of the world in which obstacles are represented as vertical instances, called stixels, standing on a surface assumed to be planar. In this paper, previous approaches for stixel tracking are extended using a two-level scheme. In the first level, stixels are tracked by matching them between frames using a bipartite graph in which edges represent a matching cost function. Then, stixels are clustered into sets representing objects in the environment. These objects are matched based on the number of stixels paired inside them. Furthermore, a faster, but less accurate approach is proposed in which only the second level is used. Several configurations of our method are compared to an existing state-of-the-art approach to show how our methodology outperforms it in several areas, including an improvement in the quality of the depth reconstruction.
| S-EPMC5017348 | biostudies-literature
Project description:PURPOSE:To assess whether artifacts in multi-slice multi-echo spin echo neck imaging, thought to be caused by brief motion events such as swallowing, can be corrected by reacquiring corrupted central k-space data and estimating the remainder with parallel imaging. METHODS:A single phase-encode line (ky = 0, phase-encode direction anteroposterior) navigator echo was used to identify motion-corrupted data and guide the online reacquisition. If motion corruption was detected in the 7 central k-space lines, they were replaced with reacquired data. Subsequently, GRAPPA reconstruction was trained on the updated central portion of k-space and then used to estimate the remaining motion-corrupted k-space data from surrounding uncorrupted data. Similar compressed sensing-based approaches have been used previously to compensate for respiration in cardiac imaging. The g-factor noise amplification was calculated for the parallel imaging reconstruction of data acquired with a 10-channel neck coil. The method was assessed in scans with 9 volunteers and 12 patients. RESULTS:The g-factor analysis showed that GRAPPA reconstruction of 2 adjacent motion-corrupted lines causes high noise amplification; therefore, the number of 2-line estimations should be limited. In volunteer scans, median ghosting reduction of 24% was achieved with 2 adjacent motion-corrupted lines correction, and image quality was improved in 2 patient scans that had motion corruption close to the center of k-space. CONCLUSION:Motion-corrupted echo-trains can be identified with a navigator echo. Combined reacquisition and parallel imaging estimation reduced motion artifacts in multi-slice MESE when there were brief motion events, especially when motion corruption was close to the center of k-space.
| S-EPMC7065122 | biostudies-literature
Project description:The aim of this study was to find the optimum extrusion process conditions for texturized soybean meal as a meat analogue for food formulations using genetic algorithm. The defatted soybean meal was replaced with whole soybean meal at 10% and extruded in the temperature range of 150-200 °C, screw speed of 270-300 rpm and 20-25% feed moisture content based on the Box-Behnken design. The barrel temperature effect was markedly greater than those of the feed moisture content and screw speed on the product functional properties and appearance. Higher temperatures led to a higher rehydration capacity, water and oil absorption capacity, however, it had a negative effect on the product brightness. It was found that the extrusion at lower moisture content improved soy protein functionality. Genetic algorithm technique was applied to find the best process conditions. The optimized process conditions were found to be the temperature of 198.8 °C, screw speed of 291 rpm and feed moisture content of 20.2%. Overall, the whole soybean treatment was applicable to overcome the oil separation issue during extrusion and the process was optimized to produce texturized soy protein with the maximum attainable functionality.
| S-EPMC5380617 | biostudies-literature
Project description:Estimation of distribution algorithm (EDA) is an intelligent optimization algorithm based on the probability statistics theory. A fast elitism Gaussian estimation of distribution algorithm (FEGEDA) is proposed in this paper. The Gaussian probability model is used to model the solution distribution. The parameters of Gaussian come from the statistical information of the best individuals by fast learning rule. A fast learning rule is used to enhance the efficiency of the algorithm, and an elitism strategy is used to maintain the convergent performance. The performances of the algorithm are examined based upon several benchmarks. In the simulations, a one-dimensional benchmark is used to visualize the optimization process and probability model learning process during the evolution, and several two-dimensional and higher dimensional benchmarks are used to testify the performance of FEGEDA. The experimental results indicate the capability of FEGEDA, especially in the higher dimensional problems, and the FEGEDA exhibits a better performance than some other algorithms and EDAs. Finally, FEGEDA is used in PID controller optimization of PMSM and compared with the classical-PID and GA.
| S-EPMC4032667 | biostudies-other
Project description:The fast imaging speed and low-intensity requirement of structured illumination microscopy (SIM) have made it one of the most widely used imaging tools in live cell imaging. In order to obtain a high fidelity reconstructed image, a precise estimation of the phase of the illumination pattern is required, especially in those structured illumination based techniques that rely on high-order harmonics to improve the resolution. This can be achieved in one of two fundamental ways. The first is to build a high-end control system capable of shifting a sinusoidal pattern with high precision, while the second is to apply estimation algorithms to determine how patterns shift during post-processing. The latter method is preferred in low-cost super-resolution imaging systems; however, existing algorithms are either time-consuming or fail due to noise and a low modulation depth. In this paper, we introduce additional matrixes into the phase estimation algorithm and propose an inverse matrix based phase estimation method with which analytical solutions of the phases can be determined without iteration. The proposed algorithm was validated via simulation and experiments using a home-made total internal reflection fluorescent SIM system (TIRF-SIM). When tested, the method obtained the true phase even when the modulation depth was low. The source code is now available for download by researchers and others.
| S-EPMC6179402 | biostudies-other
Project description:PurposeRespiratory rate can provide auxiliary information on the physiological changes within the human body, such as physical and emotional stress. In a clinical setup, the abnormal respiratory rate can be indicative of the deterioration of the patient's condition. Most of the existing algorithms for the estimation of respiratory rate using photoplethysmography (PPG) are sensitive to external noise and may require the selection of certain algorithm-specific parameters, through the trial-and-error method.MethodsThis paper proposes a new algorithm to estimate the respiratory rate using a photoplethysmography sensor signal for health monitoring. The algorithm is resistant to signal loss and can handle low-quality signals from the sensor. It combines selective windowing, preprocessing and signal conditioning, modified Welch filtering and postprocessing to achieve high accuracy and robustness to noise.ResultsThe Mean Absolute Error and the Root Mean Square Error of the proposed algorithm, with the optimal signal window size, are determined to be 2.05 breaths count per minute and 2.47 breaths count per minute, respectively, when tested on a publicly available dataset. These results present a significant improvement in accuracy over previously reported methods. The proposed algorithm achieved comparable results to the existing algorithms in the literature on the BIDMC dataset (containing data of 53 subjects, each recorded for 8 min) for other signal window sizes.ConclusionThe results endorse that integration of the proposed algorithm to a commercially available pulse oximetry device would expand its functionality from the measurement of oxygen saturation level and heart rate to the continuous measurement of the respiratory rate with good efficiency at home and in a clinical setting.Supplementary informationThe online version contains supplementary material available at 10.1007/s40846-022-00700-z.
| S-EPMC9056464 | biostudies-literature
Project description:A voiding diary is commonly used in clinical practice to monitor urinary tract health. However, manual recording and use of a measuring cup can cause significant inaccuracy and inconvenience. Recently sound-based voided volume estimation algorithms such as proudP have shown potential to accurately measure the voided volumes of patients urination while overcoming these inconveniences. In order to validate the sound-based voided volume estimation algorithm, we chose bodyweight change after urination as a reference value. Total 508 subjects from the United States and Korea were enrolled. 584 data points that have matching bodyweights change data and urination sound data were collected, and fivefold cross validation was performed in order to evaluate the model on all data in the dataset. The mean voided volume estimated by the algorithm was 202.6 mL (SD: ± 114.8) while the mean bodyweight change after urination was 208.0 g (SD: ± 121.5), and there was a strong linear correlation with high statistical significance (Pearson's correlation coefficient = 0.92, p-value < 0.001). Two paired t-test showed the equivalence with bodyweight change data with 10 mL margin. Additionally, a Bland-Altman plot shows a mean difference of - 5.5 mL with LoA (- 98.0, 87.1). The results support high performance of the algorithm across the large population data from multi-site clinical trials.
| S-EPMC10761909 | biostudies-literature
Project description:Human machine interfaces that can track head motion will result in advances in physical rehabilitation, improved augmented reality/virtual reality systems, and aid in the study of human behavior. This paper presents a head position monitoring and classification system using thin flexible strain sensing threads placed on the neck of an individual. A wireless circuit module consisting of impedance readout circuitry and a Bluetooth module records and transmits strain information to a computer. A data processing algorithm for motion recognition provides near real-time quantification of head position. Incoming data is filtered, normalized and divided into data segments. A set of features is extracted from each data segment and employed as input to nine classifiers including Support Vector Machine, Naive Bayes and KNN for position prediction. A testing accuracy of around 92% was achieved for a set of nine head orientations. Results indicate that this human machine interface platform is accurate, flexible, easy to use, and cost effective.
| S-EPMC7846730 | biostudies-literature
Project description:High-density Electroencephalography (HD-EEG) has proven to be the EEG montage that estimates the neural activity inside the brain with highest accuracy. Multiple studies have reported the effect of electrode number on source localization for specific sources and specific electrode configurations. The electrodes for these configurations are often manually selected to uniformly cover the entire head, going from 32 to 128 electrodes, but electrode configurations are not often selected according to their contribution to estimation accuracy. In this work, an optimization-based study is proposed to determine the minimum number of electrodes that can be used and to identify the optimal combinations of electrodes that can retain the localization accuracy of HD-EEG reconstructions. This optimization approach incorporates scalp landmark positions of widely used EEG montages. In this way, a systematic search for the minimum electrode subset is performed for single- and multiple-source localization problems. The Non-dominated Sorting Genetic Algorithm II (NSGA-II) combined with source reconstruction methods is used to formulate a multi-objective optimization problem that concurrently minimizes (1) the localization error for each source and (2) the number of required EEG electrodes. The method can be used for evaluating the source localization quality of low-density EEG systems (e.g. consumer-grade wearable EEG). We performed an evaluation over synthetic and real EEG datasets with known ground-truth. The experimental results show that optimal subsets with 6 electrodes can attain an equal or better accuracy than HD-EEG (with more than 200 channels) for a single source case. This happened when reconstructing a particular brain activity in more than 88% of the cases in synthetic signals and 63% in real signals, and in more than 88% and 73% of cases when considering optimal combinations with 8 channels. For a multiple-source case of three sources (only with synthetic signals), it was found that optimized combinations of 8, 12 and 16 electrodes attained an equal or better accuracy than HD-EEG with 231 electrodes in at least 58%, 76%, and 82% of cases respectively. Additionally, for such electrode numbers, lower mean errors and standard deviations than with 231 electrodes were obtained.
| S-EPMC9250504 | biostudies-literature