Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Chemical and Physical Characteristics of Doxorubicin Hydrochloride Drug-Doped Salmon DNA Thin Films.

ABSTRACT: Double-stranded salmon DNA (SDNA) was doped with doxorubicin hydrochloride drug molecules (DOX) to determine the binding between DOX and SDNA, and DOX optimum doping concentration in SDNA. SDNA thin films were prepared with various concentrations of DOX by drop-casting on oxygen plasma treated glass and quartz substrates. Fourier transform infrared (FTIR) spectroscopy was employed to investigate the binding sites for DOX in SDNA, and electrical and photoluminescence (PL) analyses were used to determine the optimum doping concentration of DOX. The FTIR spectra showed that up to a concentration of 30 μM of DOX, there was a tendency for binding with a periodic orientation via intercalation between nucleosides. The current and PL intensity increased as the DOX concentration increased up to 30 μM, and then as the concentration of DOX further increased, we observed a decrease in current as well as PL quenching. Finally, the optical band gap and second band onset of the transmittance spectra were analyzed to further verify the DOX binding and optimum doping concentration into SDNA thin films as a function of the DOX concentration.

SUBMITTER: Gnapareddy B

PROVIDER: S-EPMC4530373 | biostudies-other | 2015 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Topological, chemical and electro-optical characteristics of riboflavin-doped artificial and natural DNA thin films.

Project description:DNA is considered as a useful building bio-material, and it serves as an efficient template to align functionalized nanomaterials. Riboflavin (RF)-doped synthetic double-crossover DNA (DX-DNA) lattices and natural salmon DNA (SDNA) thin films were constructed using substrate-assisted growth and drop-casting methods, respectively, and their topological, chemical and electro-optical characteristics were evaluated. The critical doping concentrations of RF ([RF]C, approx. 5 mM) at given concentrations of DX-DNA and SDNA were obtained by observing the phase transition (from crystalline to amorphous structures) of DX-DNA and precipitation of SDNA in solution above [RF]C. [RF]C are verified by analysing the atomic force microscopy images for DX-DNA and current, absorbance and photoluminescence (PL) for SDNA. We study the physical characteristics of RF-embedded SDNA thin films, using the Fourier transform infrared spectrum to understand the interaction between the RF and DNA molecules, current to evaluate the conductance, absorption to understand the RF binding to the DNA and PL to analyse the energy transfer between the RF and DNA. The current and UV absorption band of SDNA thin films decrease up to [RF]C followed by an increase above [RF]C. By contrast, the PL intensity illustrates the reverse trend, as compared to the current and UV absorption behaviour as a function of the varying [RF]. Owing to the intense PL characteristic of RF, the DNA lattices and thin films with RF might offer immense potential to develop efficient bio-sensors and useful bio-photonic devices.

| S-EPMC5830726 | biostudies-literature

Metal and Lanthanide Ion-Co-doped Synthetic and Salmon DNA Thin Films.

Project description:Researchers have begun to use DNA molecules as an efficient template for arrangement of multiple functionalized nanomaterials for specific target applications. In this research, we demonstrated a simple process to co-dope synthetic DNA nanostructures (by a substrate-assisted growth method) and natural salmon DNA thin films (by a drop-casting method) with divalent metal ions (M2+, e.g., Co2+ and Cu2+) and trivalent lanthanide ions (Ln3+, e.g., Tb3+ and Eu3+). To identify the relationship among the DNA and dopant ions, DNA nanostructures were constructed while varying the Ln3+ concentration ([Ln3+]) at a fixed [M2+] with ion combinations of Co2+-Tb3+, Co2+-Eu3+, Cu2+-Tb3+, and Cu2+-Eu3+. Accordingly, we were able to estimate the critical [Ln3+] (named the optimum [Ln3+], [Ln3+]O) at a given [M2+] in the DNA nanostructures that corresponds to the phase change of the DNA nanostructures from crystalline to amorphous. The phase of the DNA nanostructures stayed crystalline up to [Tb3+]O ≡ 0.4 mM and [Eu3+]O ≡ 0.4 mM for Co2+ ([Tb3+]O ≡ 0.6 mM and [Eu3+]O ≡ 0.6 mM for Cu2+) and then changed to amorphous above 0.4 mM (0.6 mM). Consequently, phase diagrams of the four combinations of dopant ion pairs were created by analyzing the DNA lattice phases at given [M2+] and [Ln3+]. Interestingly, we observed extrema values of the measured physical quantities of DNA thin films near [Ln3+]O, where the maximum current, photoluminescence peak intensity, and minimum absorbance were obtained. M2+- and Ln3+-multidoped DNA nanostructures and DNA thin films may be utilized in the development of useful optoelectronic devices or sensors because of enhancement and contribution of multiple functionalities provided by M2+ and Ln3+.

| S-EPMC6648499 | biostudies-literature

Atomic-level structural and chemical analysis of Cr-doped Bi2Se3 thin films.

Project description:We present a study of the structure and chemical composition of the Cr-doped 3D topological insulator Bi2Se3. Single-crystalline thin films were grown by molecular beam epitaxy on Al2O3 (0001), and their structural and chemical properties determined on an atomic level by aberration-corrected scanning transmission electron microscopy and electron energy loss spectroscopy. A regular quintuple layer stacking of the Bi2Se3 film is found, with the exception of the first several atomic layers in the initial growth. The spectroscopy data gives direct evidence that Cr is preferentially substituting for Bi in the Bi2Se3 host. We also show that Cr has a tendency to segregate at internal grain boundaries of the Bi2Se3 film.

| S-EPMC4879552 | biostudies-literature

Resistive Switching Characteristics of Li-Doped ZnO Thin Films Based on Magnetron Sputtering.

Project description:A kind of devices Pt/Ag/ZnO:Li/Pt/Ti with high resistive switching behaviors were prepared on a SiO2/Si substrate by using magnetron sputtering method and mask technology, composed of a bottom electrode (BE) of Pt/Ti, a resistive switching layer of ZnO:Li thin film and a top electrode (TE) of Pt/Ag. To determine the crystal lattice structure and the Li-doped concentration in the resulted ZnO thin films, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) tests were carried out. Resistive switching behaviors of the devices with different thicknesses of Li-doped ZnO thin films were studied at different set and reset voltages based on analog and digital resistive switching characteristics. At room temperature, the fabricated devices represent stable bipolar resistive switching behaviors with a low set voltage, a high switching current ratio and a long retention up to 104 s. In addition, the device can sustain an excellent endurance more than 103 cycles at an applied pulse voltage. The mechanism on how the thicknesses of the Li-doped ZnO thin films affect the resistive switching behaviors was investigated by installing conduction mechanism models. This study provides a new strategy for fabricating the resistive random access memory (ReRAM) device used in practice.

| S-EPMC6515171 | biostudies-literature

Highly conductive and transparent gallium doped zinc oxide thin films via chemical vapor deposition.

Project description:Degenerately doped ZnO is seen as a potential substitute to the ubiquitous and expensive Sn doped In2O3 as a transparent electrode in optoelectronic devices. Here, highly conductive and transparent Ga doped ZnO thin films were grown via aerosol assisted chemical vapor deposition. The lowest resistivity (7.8 × 10-4 Ω.cm) and highest carrier concentration (4.23 × 1020 cm-3) ever reported for AACVD grown ZnO: Ga was achieved due to using oxygen poor growth conditions enabled by diethylzinc and triethylgallium precursors.

| S-EPMC6971236 | biostudies-literature

Bi-stable resistive switching characteristics in Ti-doped ZnO thin films.

Project description:Ti-doped ZnO (ZnO/Ti) thin films were grown on indium tin oxide substrates by a facile electrodeposition route. The morphology, crystal structure and resistive switching properties were examined, respectively. The morphology reveals that grains are composed of small crystals. The (002) preferential growth along c-axis of ZnO/Ti could be observed from structural analysis. The XPS study shows the presence of oxygen vacancies in the prepared films. Typical bipolar and reversible resistance switching effects were observed. High ROFF/RON ratios (approximately 14) and low operation voltages within 100 switching cycles are obtained. The filament theory and the interface effect are suggested to be responsible for the resistive switching phenomenon.

| S-EPMC3623890 | biostudies-other

Transparent and conducting boron doped ZnO thin films grown by aerosol assisted chemical vapor deposition.

Project description:ZnO based transparent conducting oxides are important as they provide an alternative to the more expensive Sn : In2O3 that currently dominates the industry. Here, we investigate B-doped ZnO thin films grown via aerosol assisted chemical vapour deposition. B : ZnO films were produced from zinc acetate and triethylborane using either tetrahydrofuran or methanol (MeOH) as the solvent. The lowest resistivity of 5.1 × 10-3 Ω cm along with a visible light transmittance of ∼75-80% was achieved when using MeOH as the solvent. XRD analysis only detected the wurtzite phase of ZnO suggesting successful solid solution formation with B3+ substituting Zn2+ sites in the lattice. Refinement of the XRD patterns showed minimal distortion to the ZnO unit cell upon doping when MeOH was the solvent due to the immiscibility of the [BEt3] solution (1.0 M solution in hexane) in methanol that limited the amount of B going into the films, thus preventing excessive doping.

| S-EPMC9671099 | biostudies-literature

Electrical, Structural, Optical, and Adhesive Characteristics of Aluminum-Doped Tin Oxide Thin Films for Transparent Flexible Thin-Film Transistor Applications.

Project description:The properties of Al-doped SnOx films deposited via reactive co-sputtering were examined in terms of their potential applications for the fabrication of transparent and flexible electronic devices. Al 2.2-atom %-doped SnOx thin-film transistors (TFTs) exhibit improved semiconductor characteristics compared to non-doped films, with a lower sub-threshold swing of ~0.68 Vdec-1, increased on/off current ratio of ~8 × 10?, threshold voltage (Vth) near 0 V, and markedly reduced (by 81%) Vth instability in air, attributable to the decrease in oxygen vacancy defects induced by the strong oxidizing potential of Al. Al-doped SnOx films maintain amorphous crystallinity, an optical transmittance of ~97%, and an adhesive strength (to a plastic substrate) of over 0.7 kgf/mm; such films are thus promising semiconductor candidates for fabrication of transparent flexible TFTs.

| S-EPMC6337128 | biostudies-literature

Joining Chemical Pressure and Epitaxial Strain to Yield Y-doped BiFeO3 Thin Films with High Dielectric Response.

Project description:BiFeO3 is one of the most promising multiferroic materials but undergoes two major drawbacks: low dielectric susceptibility and high dielectric loss. Here we report high in-plane dielectric permittivity (?' ?2500) and low dielectric loss (tan ??<?0.01) obtained on Bi0.95Y0.05FeO3 films epitaxially grown on SrTiO3 (001) by pulsed laser deposition. High resolution transmission electron microscopy and geometric phase analysis evidenced nanostripe domains with alternating compressive/tensile strain and slight lattice rotations. Nanoscale mixed phase/domain ensembles are commonly found in different complex materials with giant dielectric/electromechanical (ferroelectric/ relaxors) or magnetoresistance (manganites) response. Our work brings insight into the joined role of chemical pressure and epitaxial strain on the appearance of nanoscale stripe structure which creates conditions for easy reorientation and high dielectric response, and could be of more general relevance for the field of materials science where engineered materials with huge response to external stimuli are a highly priced target.

| S-EPMC4860595 | biostudies-literature

An Aerosol-Assisted Chemical Vapor Deposition Route to Tin-Doped Gallium Oxide Thin Films with Optoelectronic Properties.

Project description:Gallium oxide is a wide-bandgap compound semiconductor material renowned for its diverse applications spanning gas sensors, liquid crystal displays, transparent electrodes, and ultraviolet detectors. This paper details the aerosol assisted chemical vapor deposition synthesis of tin doped gallium oxide thin films using gallium acetylacetonate and monobutyltin trichloride dissolved in methanol. It was observed that Sn doping resulted in a reduction in the transmittance of Ga2O3 films within the visible spectrum, while preserving the wide bandgap characteristics of 4.8 eV. Furthermore, Hall effect testing revealed a substantial decrease in the resistivity of Sn-doped Ga2O3 films, reducing it from 4.2 × 106 Ω cm to 2 × 105 Ω cm for the 2.5 at. % Sn:Ga2O3 compared to the nominally undoped Ga2O3.

| S-EPMC11360363 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data