Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrochromic Type E-Paper Using Poly(1H-Thieno[3,4-d]Imidazol-2(3H)-One) Derivatives by a Novel Printing Fabrication Process.

ABSTRACT: In this study, we report poly(1H-thieno[3,4-d]imidazol-2(3H)-one) (pTIO) derivatives for an electrochromic (EC) type e-paper and its novel printing fabrication process. pTIO is a kind of conductive polymer (CP) s which are known as one of the EC materials. The electrochromism of pTIO is unique, because its color in doped state is almost transparent (pale gray). A transparent state is required to show a white color in a see-through view of an EC type e-paper. An electrochromism of CP has a good memory effect which is applicable for e-paper. The corresponding monomers of CP are able to be polymerized with an electrochemical method, which be made good use of for the fabrication process of e-paper. pTIO derivatives are copolymerized with other pi-conjugated X unit, which adjusts the color of electrochromism. Finally, we fabricated a segment matrix EC display using pTIO derivatives by ink-jet printing.

SUBMITTER: Kondo Y

PROVIDER: S-EPMC5448890 | biostudies-other | 2011 Dec

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Rapid Fabrication of Epidermal Paper-Based Electronic Devices Using Razor Printing.

Project description:This work describes the use of a benchtop razor printer to fabricate epidermal paper-based electronic devices (EPEDs). This fabrication technique is simple, low-cost, and compatible with scalable manufacturing processes. EPEDs are fabricated using paper substrates rendered omniphobic by their cost-effective silanization with fluoroalkyl trichlorosilanes, making them inexpensive, water-resistant, and mechanically compliant with human skin. The highly conductive inks or thin films attached to one of the sides of the omniphobic paper makes EPEDs compatible with wearable applications involving wireless power transfer. The omniphobic cellulose fibers of the EPED provide a moisture-independent mechanical reinforcement to the conductive layer. EPEDs accurately monitor physiological signals such as ECG (electrocardiogram), EMG (electromyogram), and EOG (electro-oculogram) even in high moisture environments. Additionally, EPEDs can be used for the fast mapping of temperature over the skin and to apply localized thermotherapy. Our results demonstrate the merits of EPEDs as a low-cost platform for personalized medicine applications.

| S-EPMC6187327 | biostudies-literature

Thieno[3,4-d][1,3]dithiole-2-thione.

Project description:In the title compound, C(5)H(2)S(4), the terminal monocyclic S atom deviates by 0.117 (1) Å from the mean plane of the other non-H atoms (r.m.s. deviation = 0.001 Å). All six C-S bonds and the central C-C bond in the rings are characterized by π-conjugated lengths, endowing the mol-ecule with high π-conjugation. In the crystal, the mol-ecules are parallel packed, forming columnar stacks along the a axis. Short inter-molecular S⋯S contacts [3.397 (1) and 3.486 (1) Å], are observed.

| S-EPMC3247483 | biostudies-literature

3,5,6-Trimethyl-thieno[2,3-d]pyrimidin-4(3H)-one.

Project description:In the title compound, C(9)H(10)N(2)OS, the thienopyrimidine ring system is almost planar [greatest deviation from the mean plane = 0.0318 (13) Å for the S atom]. The crystal packing features C-H⋯O hydrogen bonds and π-π stacking inter-actions between inversion-related pairs of mol-ecules with a centroid-centroid distance of 3.530 (3) Å.

| S-EPMC3435752 | biostudies-literature

Designing Nanoporous Membranes through Templateless Electropolymerization of Thieno[3,4-<i>b</i>]thiophene Derivatives with High Water Content.

Project description:In this work, we present the synthesis of original thieno[3,4-b]thiophene monomers with rigid substituents (e.g., perfluorinated chains, and aromatic groups) and demonstrate the ability to prepare nanotubular and nanoporous structures via templateless, surfactant-free electropolymerization in organic solvents (dichloromethane). For the majority of synthesized monomers, including a significant amount of water in the electropolymerization solvent leads to the formation of nanoporous membranes with tunable size and surface hydrophobicity. If water is not included in the electropolymerization solvent, most of the surfaces prepared are relatively smooth. Tests with different water contents show that the formation of nanoporous membranes pass through the formation of vertically aligned nanotubes and that the increase in water content induces an increase in the number of nanotubes while their diameter and height remain unchanged. An increase in surface hydrophobicity is observed with the formation of nanopores up to ?300 nm in diameter, but as the nanopores further increase in diameter, the surfaces become more hydrophilic with an observed decrease in the water contact angle. These materials and the ease with which they can be fabricated are extremely interesting for applications in separation membranes, opto-electronic devices, as well as for sensors.

| S-EPMC6704440 | biostudies-literature

Greyscale and Paper Electrochromic Polymer Displays by UV Patterning.

Project description:Electrochromic devices have important implications as smart windows for energy efficient buildings, internet of things devices, and in low-cost advertising applications. While inorganics have so far dominated the market, organic conductive polymers possess certain advantages such as high throughput and low temperature processing, faster switching, and superior optical memory. Here, we present organic electrochromic devices that can switch between two high-resolution images, based on UV-patterning and vapor phase polymerization of poly(3,4-ethylenedioxythiophene) films. We demonstrate that this technique can provide switchable greyscale images through the spatial control of a UV-light dose. The color space was able to be further altered via optimization of the oxidant concentration. Finally, we utilized a UV-patterning technique to produce functional paper with electrochromic patterns deposited on porous paper, allowing for environmentally friendly electrochromic displays.

| S-EPMC6419265 | biostudies-literature

1-Dodecyl-1H-benzo[d]imidazol-2(3H)-one.

Project description:In the title compound, C(19)H(30)N(2)O, the fused ring system is essentially planar, the maximum deviation from the mean plane being 0.013?(2)?Å for the N atom bearing the dodecyl chain. The 1-dodecyl group is almost perpendicular to the 1H-benzo[d]imidazol-2(3H)-one plane as indicated by the dihedral angle of 82.9?(2)°between planes through the fused ring system and the first three C atoms of the chain. The C-C-C-C torsion angles (about ±179°) of the dodecyl group indicate an anti-periplanar conformation. In the crystal, inversion dimers are formed by pairs of N-H?O hydrogen bonds.

| S-EPMC3515176 | biostudies-literature

Partial Biodegradable Blend for Fused Filament Fabrication: In-Process Thermal and Post-Printing Moisture Resistance.

Project description:Despite the extensive research, the moisture-based degradation of the 3D-printed polypropylene and polylactic acid blend is not yet reported. This research is a part of study reported on partial biodegradable blends proposed for large-scale additive manufacturing applications. However, the previous work does not provide information about the stability of the proposed blend system against moisture-based degradation. Therefore, this research presents a combination of excessive physical interlocking and minimum chemical grafting in a partial biodegradable blend to achieve stability against in-process thermal and moisture-based degradation. In this regard, a blend of polylactic acid and polypropylene compatibilized with polyethylene graft maleic anhydride is presented for fused filament fabrication. The research implements, for the first time, an ANOVA for combined thermal and moisture-based degradation. The results are explained using thermochemical and microscopic techniques. Scanning electron microscopy is used for analyzing the printed blend. Fourier transform infrared spectroscopy has allowed studying the intermolecular interactions due to the partial blending and degradation mechanism. Differential scanning calorimetry analyzes the blending (physical interlocking or chemical grafting) and thermochemical effects of the degradation mechanism. The thermogravimetric analysis further validates the physical interlocking and chemical grafting. The novel concept of partial blending with excessive interlocking reports high mechanical stability against moisture-based degradation.

| S-EPMC9025397 | biostudies-literature

Rapid Fabrication of MgNH4PO4·H2O/SrHPO4 Porous Composite Scaffolds with Improved Radiopacity via 3D Printing Process.

Project description:Although bone repair scaffolds are required to possess high radiopacity to be distinguished from natural bone tissues in clinical applications, the intrinsic radiopacity of them is usually insufficient. For improving the radiopacity, combining X-ray contrast agents with bone repair scaffolds is an effective method. In the present research, MgNH4PO4·H2O/SrHPO4 3D porous composite scaffolds with improved radiopacity were fabricated via the 3D printing technique. Here, SrHPO4 was firstly used as a radiopaque agent to improve the radiopacity of magnesium phosphate scaffolds. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS) were used to characterize the phases, morphologies, and element compositions of the 3D porous composite scaffolds. The radiography image showed that greater SrHPO4 contents corresponded to higher radiopacity. When the SrHPO4 content reached 9.34%, the radiopacity of the composite scaffolds was equal to that of a 6.8 mm Al ladder. The porosity and in vitro degradation of the porous composite scaffolds were studied in detail. The results show that magnesium phosphate scaffolds with various Sr contents could sustainably degrade and release the Mg, Sr, and P elements during the experiment period of 28 days. In addition, the cytotoxicity on MC3T3-E1 osteoblast precursor cells was evaluated, and the results show that the porous composite scaffolds with a SrHPO4 content of 9.34% possessed superior cytocompatibility compared to that of the pure MgNH4PO4·H2O scaffolds when the extract concentration was 0.1 g/mL. Cell adhesion experiments showed that all of the scaffolds could support MC3T3-E1 cellular attachment well. This research indicates that MgNH4PO4·H2O/SrHPO4 porous composite scaffolds have potential applications in the bone repair fields.

| S-EPMC8468055 | biostudies-literature

Iron (II) Metallo-Supramolecular Polymers Based on Thieno[3,2-b]thiophene for Electrochromic Applications.

Project description:Four new bis(tpy) unimers with different linkers between the thieno[3,2-b]thiophene-2,5-diyl central unit and terpyridine-4'-yl (tpy) end-groups: no linker (Tt), ethynediyl (TtE), 1,4-phenylene (TtPh) and 2,2'-bithophene-5,5'-diyl (TtB) are prepared, characterized, and assembled with Fe2+ ions to metallo-supramolecular polymers (Fe-MSPs). The Fe-MSP films prepared by spin-casting on Indium Tin Oxide (ITO) glass are characterized by atomic force microscope (AFM) microscopy, cyclic voltammetry, and UV/vis spectroscopy and studied for their electrochromism and effect of the unimer structure on their electrochromic performance. Of the studied MSPs, Fe-Tt shows the highest optical contrast as well as coloration efficiency (CE = 641 cm2 C-1) and the fastest optical response. This makes it an excellent candidate for possible use in electrochromic devices.

| S-EPMC7865520 | biostudies-literature

2-Chloro-methyl-2,3-dihydro-thieno[3,4-b][1,4]dioxine.

Project description:In the mol-ecule of the title compound, C(7)H(7)ClO(2)S, the six-membered ring adopts a twisted conformation. In the crystal structure, weak inter-molecular C-H⋯O hydrogen bonds link the mol-ecules. There is also a weak C-H⋯π inter-action.

| S-EPMC2968817 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data