Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Recovery rate data for silicon nitride nanoparticle isolation using sodium polytungstate density gradients.

ABSTRACT: The average recovery rate of silicon nitride nanoparticles isolated from serum using the method detailed in previous article "A novel method for isolation and recovery of ceramic nanoparticles and metal wear debris from serum lubricants at ultra-low wear rate" (Lal et al., 2016) [1] was tested gravimetrically by weighing particles doped into serum before and after the isolation process. An average recovery rate of approximately 89.6% (± 7.1?SD) was achieved.

SUBMITTER: Patel J

PROVIDER: S-EPMC6141149 | biostudies-other | 2018 Aug

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Recovery rate data for silicon nitride nanoparticle isolation using sodium polytungstate density gradients.

Patel J J Lal S S Wilshaw S P SP Hall R M RM Tipper J L JL

Data in brief 20180619

The average recovery rate of silicon nitride nanoparticles isolated from serum using the method detailed in previous article "A novel method for isolation and recovery of ceramic nanoparticles and metal wear debris from serum lubricants at ultra-low wear rate" (Lal et al., 2016) [1] was tested gravimetrically by weighing particles doped into serum before and after the isolation process. An average recovery rate of approximately 89.6% (± 7.1 SD) was achieved. ...[more]

PMID: 30229019

Similar Datasets

Concentration and size distribution data of silicon nitride nanoparticles measured using nanoparticle tracking analysis.

Project description:This article refers to the paper "A novel method for isolation and recovery of ceramic nanoparticles and metal wear debris from serum lubricants at ultra-low wear rates" (Lal et al., 2016) [1] and describes the concentration and size distribution data of silicon nitride nanoparticles measured using nanoparticle tracking analysis (NTA). A NanoSight LM10 instrument was used to capture the video data of silicon nitride nanoparticles moving under Brownian motion in the water. The video data was then analyzed using the NanoSight NTA software. This article also describes a methodology for calculating the percentage recovery of a nanoparticle isolation process.

| S-EPMC5675993 | biostudies-literature

Transparent polycrystalline cubic silicon nitride.

Project description:Glasses and single crystals have traditionally been used as optical windows. Recently, there has been a high demand for harder and tougher optical windows that are able to endure severe conditions. Transparent polycrystalline ceramics can fulfill this demand because of their superior mechanical properties. It is known that polycrystalline ceramics with a spinel structure in compositions of MgAl2O4 and aluminum oxynitride (γ-AlON) show high optical transparency. Here we report the synthesis of the hardest transparent spinel ceramic, i.e. polycrystalline cubic silicon nitride (c-Si3N4). This material shows an intrinsic optical transparency over a wide range of wavelengths below its band-gap energy (258 nm) and is categorized as one of the third hardest materials next to diamond and cubic boron nitride (cBN). Since the high temperature metastability of c-Si3N4 in air is superior to those of diamond and cBN, the transparent c-Si3N4 ceramic can potentially be used as a window under extremely severe conditions.

| S-EPMC5355983 | biostudies-literature

Quantum electromechanics on silicon nitride nanomembranes.

Project description:Radiation pressure has recently been used to effectively couple the quantum motion of mechanical elements to the fields of optical or microwave light. Integration of all three degrees of freedom-mechanical, optical and microwave-would enable a quantum interconnect between microwave and optical quantum systems. We present a platform based on silicon nitride nanomembranes for integrating superconducting microwave circuits with planar acoustic and optical devices such as phononic and photonic crystals. Using planar capacitors with vacuum gaps of 60?nm and spiral inductor coils of micron pitch we realize microwave resonant circuits with large electromechanical coupling to planar acoustic structures of nanoscale dimensions and femtoFarad motional capacitance. Using this enhanced coupling, we demonstrate microwave backaction cooling of the 4.48?MHz mechanical resonance of a nanobeam to an occupancy as low as 0.32. These results indicate the viability of silicon nitride nanomembranes as an all-in-one substrate for quantum electro-opto-mechanical experiments.

| S-EPMC4976205 | biostudies-literature

Versatile ultrathin nanoporous silicon nitride membranes.

Project description:Single- and multiple-nanopore membranes are both highly interesting for biosensing and separation processes, as well as their ability to mimic biological membranes. The density of pores, their shape, and their surface chemistry are the key factors that determine membrane transport and separation capabilities. Here, we report silicon nitride (SiN) membranes with fully controlled porosity, pore geometry, and pore surface chemistry. An ultrathin freestanding SiN platform is described with conical or double-conical nanopores of diameters as small as several nanometers, prepared by the track-etching technique. This technique allows the membrane porosity to be tuned from one to billions of pores per square centimeter. We demonstrate the separation capabilities of these membranes by discrimination of dye and protein molecules based on their charge and size. This separation process is based on an electrostatic mechanism and operates in physiological electrolyte conditions. As we have also shown, the separation capabilities can be tuned by chemically modifying the pore walls. Compared with typical membranes with cylindrical pores, the conical and double-conical pores reported here allow for higher fluxes, a critical advantage in separation applications. In addition, the conical pore shape results in a shorter effective length, which gives advantages for single biomolecule detection applications such as nanopore-based DNA analysis.

| S-EPMC2795523 | biostudies-literature

Facile synthesis of silicon nitride nanowires with flexible mechanical properties and with diameters controlled by flow rate.

Project description:Ultralong Si3N4 nanowires (NWs) were successfully synthesized with size controlled in N2 gas by using an efficient method. The diameters of the Si3N4 NWs increased when the flow rate of N2 gas increased, with average diameters of 290 nm from flow rates of 100 ml/min, 343 nm from flow rates of 200 ml/min and 425 nm from flow rates of 400 ml/min. Young's modulus was found to rely strongly on the diameters of the Si3N4 NWs, decreasing from approximately 526.0 GPa to 321.9 GPa; as the diameters increased from 360 nm to 960 nm. These findings provide a promising method for tailoring these mechanical properties of the NWs in a controlled manner over a wide range of Young's modulus values. Vapour-liquid-solid (VLS) mechanisms were used to model the growth of Si3N4 NWs on the inner wall of an alumina crucible and on the surface of the powder mixture. Alumina may be an effective mediator of NW growth that plays an important role in controlling the concentrations of Si-containing reactants to support the growth of NWs on the inner wall of the alumina crucible. This approach offers a valuable means for preparing ultralong Si3N4 NWs doped with Al with unique properties.

| S-EPMC5368666 | biostudies-literature

Silicon photonic acoustic detector (SPADE) using a silicon nitride microring resonator

Project description:Silicon photonics is an emerging platform for acoustic sensing, offering exceptional miniaturization and sensitivity. While efforts have focused on silicon-based resonators, silicon nitride resonators can potentially achieve higher Q-factors, further enhancing sensitivity. In this work, a 30 µm silicon nitride microring resonator was fabricated and coated with an elastomer to optimize acoustic sensitivity and signal fidelity. The resonator was characterized acoustically, and its capability for optoacoustic tomography was demonstrated. An acoustic bandwidth of 120 MHz and a noise-equivalent pressure of ∼ 7 mPa/Hz1/2 were demonstrated. The spatially dependent impulse response agreed with theoretical predictions, and spurious acoustic signals, such as reverberations and surface acoustic waves, had a marginal impact. High image fidelity optoacoustic tomography of a 20 µm knot was achieved, confirming the detector’s imaging capabilities. The results show that silicon nitride offers low signal distortion and high-resolution optoacoustic imaging, proving its versatility for acoustic imaging applications.

| S-EPMC10461202 | biostudies-literature

Photoluminescence and electronic transitions in cubic silicon nitride.

Project description:A spectroscopic study of cubic silicon nitride (?-Si3N4) at cryogenic temperatures of 8?K in the near IR - VUV range of spectra with synchrotron radiation excitation provided the first experimental evidence of direct electronic transitions in this material. The observed photoluminescence (PL) bands were assigned to excitons and excited and centers formed after the electron capture by neutral structural defects. The excitons are weakly quenched on neutral and strongly on charged defects. The fundamental band-gap energy of 5.05?±?0.05?eV and strong free exciton binding energy ~0.65?eV were determined. The latter value suggests a high efficiency of the electric power transformation in light in defect-free crystals. Combined with a very high hardness and exceptional thermal stability in air, our results indicate that ?-Si3N4 has a potential for fabrication of robust and efficient photonic emitters.

| S-EPMC4698759 | biostudies-literature

Nanophotonic Pockels modulators on a silicon nitride platform.

Project description:Silicon nitride (SiN) is emerging as a competitive platform for CMOS-compatible integrated photonics. However, active devices such as modulators are scarce and still lack in performance. Ideally, such a modulator should have a high bandwidth, good modulation efficiency, low loss, and cover a wide wavelength range. Here, we demonstrate the first electro-optic modulators based on ferroelectric lead zirconate titanate (PZT) films on SiN, in both the O-band and C-band. Bias-free operation, bandwidths beyond 33?GHz and data rates of 40?Gbps are shown, as well as low propagation losses (????1?dB?cm-1). A half-wave voltage-length product of 3.2?V?cm is measured. Simulations indicate that further improvement is possible. This approach offers a much-anticipated route towards high-performance phase modulators on SiN.

| S-EPMC6110768 | biostudies-literature

Room-temperature single-photon emitters in silicon nitride.

Project description:[Figure: see text].

| S-EPMC8664256 | biostudies-literature

Aluminum Nitride to Silicon Direct Bonding for an Alternative Silicon-On-Insulator Platform.

Project description:The next generation of microelectromechanical systems (MEMS) requires new materials and platforms that can exploit the intrinsic properties of advanced materials and structures, such as materials with high thermal conductivity, broad optical transmission spectra, piezoelectric properties, and miniaturization potential. Therefore, we need to look beyond standard SiO2-based silicon-on-insulator (SOI) structures to realize ubiquitous MEMS. This work proposes using AlN as an alternative SOI structure due to several inherent material property advantages as well as functional advantages. This work presents the results of reactively sputtered AlN films on a Si handle wafer bonded with a mirror-polished Si device wafer. Wafer bonding was achieved by using hydrophilic wafer bonding processes, which was realized by appropriate polymerization of the prebonding surfaces. Plasma activation of the AlN surface included O2, Ar, SF6, SF6 + Ar, and/or SF6 + O2, which resulted in a change in the chemical and topography state of the surface. Changes in the AlN surface properties included enhanced hydrophilicity, reduced surface roughness, and low nanotopography, components essential for successful hydrophilic direct wafer bonding. Wafer bonding experiments were carried out using promising surface activation methods. The results showed a multilayered bonding interface of Si(Device)/SiO2/ALON/AlN/Si(Handle) with fluorine in the aluminum oxynitride layer from the proceeding AlN surface activation process. More notably, this work provided wafer bonding tensile strength results of the AlN alternative SOI structure that compares with the traditional SiO2 SOI counterpart, making AlN to Si direct bonding an attractive alternative SOI platform.

| S-EPMC8397240 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data