Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Magnetoelectricity of CoFe2O4 and tetragonal phase BiFeO3 nanocomposites prepared by pulsed laser deposition.

ABSTRACT: The coupling between the tetragonal phase (T-phase) of BiFeO3 (BFO) and CoFe2O4 (CFO) in magnetoelectric heterostructures has been studied. Bilayers of CFO and BFO were deposited on (001) LaAlO3 single crystal substrates by pulsed laser deposition. After 30?min of annealing, the CFO top layer exhibited a T-phase-like structure, developing a platform-like morphology with BFO. Magnetic hysteresis loops exhibited a strong thickness effect of the CFO layer on the coercive field, in particular along the out-of-plane direction. Magnetic force microscopy images revealed that the T-phase CFO platform contained multiple magnetic domains, which could be tuned by applying a tip bias. A combination of shape, strain, and exchange coupling effects are used to explain the observations.

SUBMITTER: Gao M

PROVIDER: S-EPMC5762771 | biostudies-literature | 2018 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Magnetoelectricity of CoFe2O4 and tetragonal phase BiFeO3 nanocomposites prepared by pulsed laser deposition.

Gao Min M Viswan Ravindranath R Tang Xiao X Leung Chung Ming CM Li Jiefang J Viehland D D

Scientific reports 20180110 1

The coupling between the tetragonal phase (T-phase) of BiFeO3 (BFO) and CoFe2O4 (CFO) in magnetoelectric heterostructures has been studied. Bilayers of CFO and BFO were deposited on (001) LaAlO3 single crystal substrates by pulsed laser deposition. After 30 min of annealing, the CFO top layer exhibited a T-phase-like structure, developing a platform-like morphology with BFO. Magnetic hysteresis loops exhibited a strong thickness effect of the CFO layer ...[more]

PMID: 29321643

Similar Datasets

Li-rich thin film cathode prepared by pulsed laser deposition.

Project description:Li-rich layer-structured cathode thin films are prepared by pulsed laser deposition. X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), X-ray photoelectron spectroscopy (XPS) and electrochemical testing in half battery cells are used to characterize crystal structure, surface morphology, chemical valence states and electrochemical performance of these thin films, respectively. It is observed that partial layer to spinel transformation takes place during post annealing, and the layered structure further gradually transforms to spinel during electrochemical cycling based on the analysis of dQ/dV. Electrochemical measurement shows that the thin film electrode deposited at 350 mTorr and post-annealed at 800 °C possesses the best performance.

| S-EPMC3840378 | biostudies-other

Towards Scalable Large-Area Pulsed Laser Deposition.

Project description:One of the significant limitations of the pulsed laser deposition method in the mass-production-technologies of micro- and nanoelectronic and molecular device electronic fabrication is the issue of ensuring deposition of films with uniform thickness on substrates with large diameter (more than 100 mm) since the area of the laser spot (1-5 mm2) on the surface of the ablated target is incommensurably smaller than the substrate area. This paper reports the methodology that allows to calculate the distribution profile of the film thickness over the surface substrate with a large diameter, taking into account the construction and technological parameters of the pulsed laser deposition equipment. Experimental verification of the proposed methodology showed that the discrepancy with the experiment does not exceed 8%. The modeling of various technological parameters influence on the thickness uniformity has been carried out. Based on the modeling results, recommendations and parameters are proposed for manufacturing uniform thickness films. The results allow for increasing the film thickness uniformity with the thickness distribution < 5% accounts for ~ 31% of 300 mm diameter substrate.

| S-EPMC8432691 | biostudies-literature

New Insight into the Gas Phase Reaction Dynamics in Pulsed Laser Deposition of Multi-Elemental Oxides.

Project description:The gas-phase reaction dynamics and kinetics in a laser induced plasma are very much dependent on the interactions of the evaporated target material and the background gas. For metal (M) and metal-oxygen (MO) species ablated in an Ar and O2 background, the expansion dynamics in O2 are similar to the expansion dynamics in Ar for M+ ions with an MO+ dissociation energy smaller than O2. This is different for metal ions with an MO+ dissociation energy larger than for O2. This study shows that the plume expansion in O2 differentiates itself from the expansion in Ar due to the formation of MO+ species. It also shows that at a high oxygen background pressure, the preferred kinetic energy range to form MO species as a result of chemical reactions in an expanding plasma, is up to 5 eV.

| S-EPMC9320868 | biostudies-literature

Growth mechanism of epitaxial YSZ on Si by Pulsed Laser Deposition.

Project description:The epitaxial growth of yttria-stabilized zirconia (YSZ) on silicon with native oxide was investigated in order to gain more insight in the growth mechanism. Specifically, attention was paid to the possibilities to control the chemical interactions between YSZ, silicon and oxygen during initial growth. The sources of oxygen during growth proved to play an important role in the growth process, as shown by individual manipulation of all sources present during Pulsed Laser Deposition. Partial oxidation of the YSZ plasma and sufficient delivery of oxygen to the growing film were necessary to prevent silicide formation and obtain optimal YSZ crystalline qualities. In these conditions, thickness increase of the silicon native oxide before growth just started to occur, while a much faster regrowth of silicon oxide at the YSZ-Si interface occurred during growth. Control of all these contributions to the growth process is necessary to obtain reproducible growth of high quality YSZ.

| S-EPMC5893595 | biostudies-literature

Controlling exchange bias in Fe3O4/FeO composite particles prepared by pulsed laser irradiation.

Project description:Spherical iron oxide nanocomposite particles composed of magnetite and wustite have been successfully synthesized using a novel method of pulsed laser irradiation in ethyl acetate. Both the size and the composition of nanocomposite particles are controlled by laser irradiation condition. Through tuning the laser fluence, the Fe3O4/FeO phase ratio can be precisely controlled, and the magnetic properties of final products can also be regulated. This work presents a successful example of the fabrication of ferro (ferri) (FM)/antiferromagnetic (AFM) systems with high chemical stability. The results show this novel simple method as widely extendable to various FM/AFM nanocomposite systems.

| S-EPMC3211284 | biostudies-literature

Pulsed laser deposition of Zn(O,Se) layers in nitrogen background Pressure.

Project description:Zinc oxy-selenide Zn(O,Se) is a novel material, that can replace the toxic CdS buffer layer in thin film solar cells and other optoelectronic devices. In this paper a systematic study of the structural, optical and electrical properties of Zn(O,Se) layers, grown by pulsed laser deposition under 50 mTorr of nitrogen background pressure, over a wide range of the substrate temperature, from RT to 600?°C, is reported. XRD, Raman, HR-SEM, XPS, UV-Vis techniques and Hall effect measurements have been used to investigate the structural, and optoelectronic properties of Zn(O,Se) layers. XRD analysis revealed that the polycrystalline ternary Zn(O,Se) phase formed at 500?°C. Raman analysis confirmed the formation of the polycrystalline Zn(O,Se) phase at 500?°C and an amorphous phase at substrate temperatures below 500?°C. Similarly, XPS analysis accompanied with the modified Auger parameters confirmed formation of ternary Zn(O,Se) layer at 500?°C as well. HR-SEM investigation showed the growth of homogenous, dense and adherent films onto a glass substrate. Furthermore, optical studies revealed that all prepared films are practically transparent in the visible region of the spectrum, with a band gap around 3?eV. Hall effect measurements revealed that conductivity, and electron concentration, increased by four orders of magnitude at 600?°C. It was found, that nitrogen background pressure maintained stable ratios of elemental contents in the whole range of the substrate temperature for Zn(O,Se) layers.

| S-EPMC6877616 | biostudies-literature

Vacancy cluster in ZnO films grown by pulsed laser deposition.

Project description:Undoped and Ga-doped ZnO films were grown on c-sapphire using pulsed laser deposition (PLD) at the substrate temperature of 600 °C. Positron annihilation spectroscopy study (PAS) shows that the dominant VZn-related defect in the as-grown undoped ZnO grown with relative low oxygen pressure P(O2) is a vacancy cluster (most likely a VZn-nVO complex with n = 2, 3) rather than the isolated VZn which has a lower formation energy. Annealing these samples at 900 °C induces out-diffusion of Zn from the ZnO film into the sapphire creating the VZn at the film/sapphire interface, which favors the formation of vacancy cluster containing relatively more VZn. Increasing the P(O2) during growth also lead to the formation of the vacancy cluster with relatively more VZn. For Ga-doped ZnO films, the oxygen pressure during growth has significant influence on the electron concentration and the microstructure of the VZn-related defect. Green luminescence (GL) and yellow luminescence (YL) were identified in the cathodoluminescence study (CL) study, and both emission bands were quenched after hydrogen plasma treatment. The origin of the GL is discussed.

| S-EPMC6401145 | biostudies-other

Tunable critical temperature for superconductivity in FeSe thin films by pulsed laser deposition.

Project description:Stabilized FeSe thin films in ambient pressure with tunable superconducting critical temperature would be a promising candidate for superconducting electronic devices. By carefully controlling the depositions on twelve kinds of substrates using a pulsed laser deposition technique single crystalline FeSe thin films were fabricated. The high quality of the thin films was confirmed by X-ray diffraction with a full width at half maximum of 0.515° in the rocking curve and clear four-fold symmetry in ?-scan. The films have a maximum T c ~ 15?K on the CaF2 substrate and were stable in ambient conditions air for more than half a year. Slightly tuning the stoichiometry of the FeSe targets, the superconducting critical temperature becomes adjustable below 15?K with quite narrow transition width less than 2?K. These FeSe thin films deposited on different substrates are optimized respectively. The Tc of these optimized films show a relation with the out-of-plane (c-axis) lattice parameter of the FeSe films.

| S-EPMC5840431 | biostudies-literature

One-step Synthesis of Few-layer WS2 by Pulsed Laser Deposition.

Project description:Atomically thin tungsten disulfide (WS2) has attracted much attention in recent years due its indirect-to-direct band gap transition, band gap tunability, and giant spin splitting. However, the fabrication of atomically thin WS2 remains largely underdeveloped in comparison to its structural analogue MoS2. Here we report the direct fabrication of highly crystalline few-layer WS2 on silver substrates by pulse laser deposition at the relatively low temperature of 450 °C. The growth takes places by conventional epitaxy, through the in-situ formation of nearly lattice-matching Ag2S on the silver surface. Intriguingly, it was observed that the resulting film was composed of not only the usual semiconducting 2H-WS2 structure but also the less common metallic 1T-WS2. Modifications of the synthesis parameters allow for control over the crystalline quality, film thickness and crystal phase composition of the resulting WS2 film.

| S-EPMC4676019 | biostudies-other

Combined magnetron sputtering and pulsed laser deposition of TiO 2 and BFCO thin films.

Project description:We report the successful demonstration of a hybrid system that combines pulsed laser deposition (PLD) and magnetron sputtering (MS) to deposit high quality thin films. The PLD and MS simultaneously use the same target, leading to an enhanced deposition rate. The performance of this technique is demonstrated through the deposition of titanium dioxide and bismuth-based perovskite oxide Bi2FeCrO6 (BFCO) thin films on Si(100) and LaAlO3 (LAO) (100). These specific oxides were chosen due to their functionalities, such as multiferroic and photovoltaic properties (BFCO) and photocatalysis (TiO2). We compare films deposited by conventional PLD, MS and PLD combined with MS, and show that under all conditions the latter technique offers an increased deposition rate (+50%) and produces films denser (+20%) than those produced by MS or PLD alone, and without the large clusters found in the PLD-deposited films. Under optimized conditions, the hybrid technique produces films that are two times smoother than either technique alone.

| S-EPMC5451404 | biostudies-literature