Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Functionalization of Single-Walled Carbon Nanotubes with End-Capped Polystyrene via a Single-Step Diels-Alder Cycloaddition.

ABSTRACT: A facile, single-step, [4+2] Diels-Alder cycloaddition reaction for the surface functionalization of single-walled carbon nanotubes (SWNTs) with end-capped polystyrene chains is presented. The thermal cycloaddition reaction took place at high temperature (~230 °C) without any catalyst between the sp² network of carbon nanotubes, which acted as dienophile, and the diphenylethylene cyclobutene (DPE-CB) terminal group of the polystyrene chain. Anionic polymerization was employed for the synthesis of the polystyrene macromolecule, and successful and quantitative end-capping reaction with the DPE-CB molecule was confirmed by matrix-assisted laser desorption/ionization time of flight mass spectroscopy. Thermogravimetric analysis revealed the wt % of the grafted macromolecule on the CNT surface as well as the grafting density of the polymer chains on the SWNTs (0.027 chains nm^-2). Direct evidence for the surface functionalization and the presence of thin polystyrene film was obtained by transmission electron microscopy (TEM) and by atomic force microscopy (AFM).

SUBMITTER: Stathouraki MM

PROVIDER: S-EPMC8038725 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

5-Hydroxyindoles by intramolecular alkynol-furan diels-alder cycloaddition.

Project description:A convergent approach provides a convenient access to synthetically and biologically useful 3,4-disubstituted 5-hydroxyindoles. The one-pot procedure uses microwave heating to initiate an intramolecular [4 + 2]-cycloaddition of an alkynol segment onto a furan followed by a fragmentation, aromatization, and N-Boc deprotection cascade. Yields range from 15 to 74%, with aromatic substituents providing better conversions. 4-Trimethylsilylated analogues undergo a 1,3-silatropic rearrangement to give the O-TMS ethers.

| S-EPMC3684082 | biostudies-literature

Noncovalent Functionalization of Single-Walled Carbon Nanotubes with a Photocleavable Polythiophene Derivative.

Project description:Single-walled carbon nanotubes (SWCNTs) have received extensive research attention owing to their extraordinary optical, electrical, and mechanical properties, which make them particularly attractive for application in optoelectronic devices. However, SWCNTs are insoluble in almost all solvents. Therefore, developing methods to solubilize SWCNTs is crucial for their use in solution-based processes. In this study, we developed a photocleavable polythiophene-derivative polymer dispersant for SWCNTs. The noncovalent surface functionalization of SWCNTs with a polymer allows their dispersal in tetrahydrofuran. The resultant solution-processed polymer/SWCNT composite film undergoes a hydrophobic-to-hydrophilic change in surface properties upon light irradiation (313 nm) because hydrophilic carboxyl groups are formed upon photocleavage of the hydrophobic solubilizing units in the polymer. Furthermore, the photocleaved composite film displays a 38-fold increase in electrical conductivity. This is due to the removal of the solubilizing unit, which is electrically insulating.

| S-EPMC8746816 | biostudies-literature

Intramolecular diels-alder/1,3-dipolar cycloaddition cascade of 1,3,4-oxadiazoles.

Project description:Full details of a systematic exploration of the intramolecular [4 + 2]/[3 + 2] cycloaddition cascade of 1,3,4-oxadiazoles are disclosed in which the scope and utility of the reaction are defined.

| S-EPMC2587417 | biostudies-literature

Hetero-Diels-Alder Cycloaddition with RAFT Polymers as Bioconjugation Platform.

Project description:We introduce the bioconjugation of polymers synthesized by RAFT polymerization, bearing no specific functional end group, by means of hetero-Diels-Alder cycloaddition through their inherent terminal thiocarbonylthio moiety with a diene-modified model protein. Quantitative conjugation occurs over the course of a few hours, at ambient temperature and neutral pH, and in the absence of any catalyst. Our technology platform affords thermoresponsive bioconjugates, whose aggregation is solely controlled by the polymer chains.

| S-EPMC7693046 | biostudies-literature

Room temperature amine sensors enabled by sidewall functionalization of single-walled carbon nanotubes.

Project description:A new series of sidewall modified single-walled carbon nanotubes (SWCNTs) with perfluorophenyl molecules bearing carboxylic acid or methyl ester moieties are herein reported. Pristine and functionalized SWCNTs (p-SWCNTs and f-SWCNTs, respectively) were characterized by X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and scanning electron microscopy (SEM). The nitrene-based functionalization provided intact SWCNTs with methyl 4-azido-2,3,5,6-tetrafluorobenzoate (SWCNT-N-C6F4CO2CH3) and 4-azido-2,3,5,6-tetrafluorobenzoic acid (SWCNT-N-C6F4CO2H) attached every 213 and 109 carbon atoms, respectively. Notably, SWCNT-N-C6F4CO2H was sensitive in terms of the percentage of conductance variation from 5 to 40 ppm of ammonia (NH3) and trimethylamine (TMA) with a two-fold higher variation of conductance compared to p-SWCNTs at 40 ppm. The sensors are highly sensitive to NH3 and TMA as they showed very low responses (0.1%) toward 200 ppm of volatile organic compounds (VOCs) containing various functional groups representative of different classes of analytes such as benzene, tetrahydrofurane (THF), hexane, ethyl acetate (AcOEt), ethanol, acetonitrile (CH3CN), acetone and chloroform (CHCl3). Our system is a promising candidate for the realization of single-use chemiresistive sensors for the detection of threshold crossing by low concentrations of gaseous NH3 and TMA at room temperature.

| S-EPMC6390973 | biostudies-literature

Chemi- vs physisorption in the radical functionalization of single-walled carbon nanotubes under microwaves.

Project description:The effect of microwaves on the functionalization of single-walled carbon nanotubes (SWNTs) by the diazonium method was studied. The usage of a new approach led to the identification of the strength of the interaction (physical or chemical) between the functional groups and the carbon nanotube surface. Moreover, the nature (chemical formula) of the adsorbed/grafted functional groups was determined. According to thermogravimetric analysis coupled with mass spectrometry and Raman spectroscopy, the optimal functionalization level was reached after 5 min of reaction. Prolonged reaction times can lead to undesired reactions such as defunctionalization, solvent addition and polymerization of the grafted functions. The strength (chemi- vs physisorption) of the bonds between the grafted functional groups and the SWNTs is discussed showing the occurrence of physical adsorption as a consequence of defunctionalization after 15 min of reaction under microwaves. Several chemical mechanisms of grafting could be identified, and it was possible to distinguish conditions leading to the desired chemical grafting from those leading to undesired reactions such as physisorption and polymerization.

| S-EPMC4077304 | biostudies-literature

Carbohydrate conjugation through microwave-assisted functionalization of single-walled carbon nanotubes using perfluorophenyl azides.

Project description:Carbohydrate-functionalized single-walled carbon nanotubes (SWNTs) were synthesized using microwave-assisted reaction of perfluorophenyl azide with the nanotubes. The results showed that microwave radiation provides a rapid and effective means to covalently attach carbohydrates to SWNTs, producing carbohydrate-SWNT conjugates for biorecognition. The carbohydrate-functionalized SWNTs were furthermore shown to interact specifically with cognate carbohydrate-specific proteins (lectins), resulting in predicted recognition patterns. The carbohydrate-presenting SWNTs constitute a new platform for sensitive protein- or cell recognition, which pave the way for glycoconjugated carbon nanomaterials in biorecognition applications.

| S-EPMC4383660 | biostudies-literature

Diels-Alder cycloaddition for fluorophore targeting to specific proteins inside living cells.

Project description:The inverse-electron-demand Diels-Alder cycloaddition between trans-cyclooctenes and tetrazines is biocompatible and exceptionally fast. We utilized this chemistry for site-specific fluorescence labeling of proteins on the cell surface and inside living mammalian cells by a two-step protocol. Escherichia coli lipoic acid ligase site-specifically ligates a trans-cyclooctene derivative onto a protein of interest in the first step, followed by chemoselective derivatization with a tetrazine-fluorophore conjugate in the second step. On the cell surface, this labeling was fluorogenic and highly sensitive. Inside the cell, we achieved specific labeling of cytoskeletal proteins with green and red fluorophores. By incorporating the Diels-Alder cycloaddition, we have broadened the panel of fluorophores that can be targeted by lipoic acid ligase.

| S-EPMC3381951 | biostudies-literature

Single-step extraction of small-diameter single-walled carbon nanotubes in the presence of riboflavin.

Project description:We propose a novel approach to disperse and extract small-diameter single-walled carbon nanotubes (SWCNTs) using an aqueous solution of riboflavin and Sephacryl gel. The extraction of small-diameter semiconducting SWCNTs was observed, regardless of the initial diameter distribution of the SWCNTs. Dispersion of SWCNTs occurs due to the adsorption of π-conjugated isoalloxazine moieties on the surface of small-diameter nanotubes and interactions between hydroxy groups of ribityl chains with water. During the SWCNT extraction, specific adsorption of riboflavin to SWCNTs leads to the minimization of interactions between the SWCNTs and gel media. Our experimental findings are supported by ab initio calculations demonstrating the impact of the riboflavin wrapping pattern around the SWCNTs on their interaction with the allyl dextran gel.

| S-EPMC9795860 | biostudies-literature

A one-step route to solubilised, purified or functionalised single-walled carbon nanotubes.

Project description:Reductive dissolution is a promising processing route for single walled carbon nanotubes (SWCNTs) that avoids the damage caused by ultrasonication and aggressive oxidation whilst simultaneously allowing access to a wealth of SWCNT functionalisation reactions. Here, reductive dissolution has been simplified to a single one-pot reaction through the use of sodium naphthalide in dimethylacetamide allowing direct synthesis of SWCNT Na+ solutions. Gram quantities of SWCNTs can be dissolved at concentrations over 2 mg mL-1. These reduced SWCNT solutions can easily be functionalised through the addition of alkyl halides; reducing steric bulk of the grafting moiety and increasing polarisability of the leaving group increases the extent of functionalisation. An optimised absolute sodium concentration of 25 mM is shown to be more important than carbon to metal ratio in determining the maximum degree of functionalisation. This novel dissolution system can be modified for use as a non-destructive purification route for raw SWCNT powder by adjusting the degree of charging to dissolve carbonaceous impurities, catalyst particles and defective material, before processing the remaining SWCNTs.

| S-EPMC4786951 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data