Two-step deposition of Al-doped ZnO on p-GaN to form ohmic contacts.
Ontology highlight
ABSTRACT:
SUBMITTER: Su X
PROVIDER: S-EPMC5529301 | biostudies-other | 2017 Dec
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Low Al-composition p-GaN/Mg-doped Al0.25Ga0.75N/n(+)-GaN polarization-induced backward tunneling junction (PIBTJ) was grown by metal-organic chemical vapor deposition on sapphire substrate. A self-consistent solution of Poisson-Schrödinger equations combined with polarization-induced theory was used to model PIBTJ structure, energy band diagrams and free carrier concentrations distribution. The PIBTJ displays reliable and reproducible backward tunneling with a current density of 3?A/cm(2) at the reverse bias of -1?V. The absence of negative differential resistance behavior of PIBTJ at forward bias can mainly be attributed to the hole compensation centers, including C, H and O impurities, accumulated at the p-GaN/Mg-doped AlGaN heterointerface.
| S-EPMC4159626 | biostudies-literature
Project description:CdZnTe (CZT) has made a significant impact as a material for room-temperature nuclear-radiation detectors due to its potential impact in applications related to nonproliferation, homeland security, medical imaging, and gamma-ray telescopes. In all such applications, common metals, such as gold, platinum and indium, have been used as electrodes for fabricating the detectors. Because of the large mismatch in the thermal-expansion coefficient between the metal contacts and CZT, the contacts can undergo stress and mechanical degradation, which is the main cause for device instability over the long term. Here, we report for the first time on our use of Al-doped ZnO as the preferred electrode for such detectors. The material was selected because of its better contact properties compared to those of the metals commonly used today. Comparisons were conducted for the detector properties using different contacts, and improvements in the performances of ZnO:Al-coated detectors are described in this paper. These studies show that Al:ZnO contacts to CZT radiation detectors offer the potential of becoming a transformative replacement for the common metallic contacts due to the dramatic improvements in the performance of detectors and improved long-term stability.
| S-EPMC4877641 | biostudies-literature
Project description:Mesoporous Al-doped ZnO thin films incorporated with gold nanoparticles (Au NPs) were synthesized using a sol-gel and evaporation-induced self-assembly process. In this study, the complementary effects of Au NP incorporation and Al doping on the thermoelectric properties of mesoporous ZnO thin films were analysed. The incorporated Au NPs induced an increase in electrical conductivity but a detriment in the pore arrangement of the mesoporous ZnO thin film, which was accompanied by a decrease in porosity. However, the addition of the Al dopant minimized the pore structural collapse because of the inhibition of the grain growth in the ZnO skeletal structure, resulting in the enhancement of the pore arrangement and porosity. When the Au NPs and Al dopant were added at the same time, the degradation in the pore structure was minimized and the electrical conductivity was effectively increased, but the absolute value of the Seebeck coefficient was decreased. However, as a result, the thermoelectric power factor was increased by 2.4 times compared to that of the pristine mesoporous ZnO thin film. It was found that co-introducing the Au NPs and Al doping to the mesoporous ZnO structure was effective in preserving the pore structure and increasing the electric conductivity, thereby enhancing the thermoelectric property of the mesoporous ZnO thin film.
| S-EPMC6549978 | biostudies-literature
Project description:This study investigated carrier compensation induced by thermal annealing in sputtered ZnO:Al (Al₂O₃: 0.25, 0.5, 1.0, and 2.0 wt %) films. The films were post-annealed in a N₂ atmosphere at low (1 × 10-23 atm) and high (1 × 10-4 atm) oxygen partial pressures (PO2). In ZnO:Al films with low Al contents (i.e., 0.25 wt %), the carrier density (n) began to decrease at annealing temperatures (Ta) of 600 °C at low PO2. At higher PO2 and/or Al contents, n values began to decrease significantly at lower Ta (ca. 400 °C). In addition, Zn became desorbed from the films during heating in a high vacuum (i.e., <1 × 10-⁷ Pa). These results suggest the following: (i) Zn interstitials and Zn vacancies are created in the ZnO lattice during post-annealing treatments, thereby leading to carrier compensation by acceptor-type Zn vacancies; (ii) The compensation behavior is significantly enhanced for ZnO:Al films with high Al contents.
| S-EPMC5459124 | biostudies-other
Project description:The incorporation of doping elements in ZnO nanostructures plays an important role in adjusting the optical and electrical properties in optoelectronic devices. In the present study, we fabricated 1-D ZnO nanorods (NRs) doped with different In contents (0% ~ 5%) on p-GaN films using a facile hydrothermal method, and investigated the effect of the In doping on the morphology and electronic structure of the NRs and the electrical and optical performances of the n-ZnO NRs/p-GaN heterojunction light emitting diodes (LEDs). As the In content increased, the size (diameter and length) of the NRs increased, and the electrical performance of the LEDs improved. From the electroluminescence (EL) spectra, it was found that the broad green-yellow-orange emission band significantly increased with increasing In content due to the increased defect states (oxygen vacancies) in the ZnO NRs, and consequently, the superposition of the emission bands centered at 415 nm and 570 nm led to the generation of white-light. These results suggest that In doping is an effective way to tailor the morphology and the optical, electronic, and electrical properties of ZnO NRs, as well as the EL emission property of heterojunction LEDs.
| S-EPMC4437377 | biostudies-literature
Project description:We propose and fabricate a heterojunction between Al-doped ZnO and (Mg, N)-doped CuCrO2 thin films using the sputtering deposition method. These materials possess wide bandgap that makes them transparent in the visible light but excellent UV-absorbers. On the other hand, the high conductivity of these materials, respectively as n-type and p-type transparent conducting oxides, facilitates the charge transport. We show that the p-n junction fabricated from these materials has the potential to act as a high-performance UV photovoltaic photodetector. The proposed structure, demonstrates fast responses in order of sub seconds, photosensitivity of ~ 41,000, responsivity of 1.645 mA/W, and a detectivity of 3.52 × 1012 Jones that are significantly improved in comparison with the Al-doped ZnO photoconductor. This excellent improvement is attributed to the capability of the photovoltaic configuration that creates a built-in voltage and facilitates the charge separation and collection rather than recombination in the photoconductor configuration.
| S-EPMC8455524 | biostudies-literature
Project description:Extrinsically doped ZnO thin films are of interest due to their high electrical conductivity and transparency to visible light. In this study, P doped ZnO thin films were grown on glass substrates via aerosol assisted chemical vapour deposition. The results show that P is a successful dopant for ZnO in the V+ oxidation state and is able to reduce resistivity to 6.0 × 10-3 Ω cm while maintaining visible light transmittance at ∼75%. The thins films were characterized by X-ray diffraction studies that showed only Bragg peaks for the wurtzite ZnO phase. Fitting of the diffraction data to a Le Bail model also showed a general expansion of the ZnO unit cell upon doping due to the substitution of Zn2+ ions with the larger P5+.
| S-EPMC9056824 | biostudies-literature
Project description:ZnO based transparent conducting oxides are important as they provide an alternative to the more expensive Sn : In2O3 that currently dominates the industry. Here, we investigate B-doped ZnO thin films grown via aerosol assisted chemical vapour deposition. B : ZnO films were produced from zinc acetate and triethylborane using either tetrahydrofuran or methanol (MeOH) as the solvent. The lowest resistivity of 5.1 × 10-3 Ω cm along with a visible light transmittance of ∼75-80% was achieved when using MeOH as the solvent. XRD analysis only detected the wurtzite phase of ZnO suggesting successful solid solution formation with B3+ substituting Zn2+ sites in the lattice. Refinement of the XRD patterns showed minimal distortion to the ZnO unit cell upon doping when MeOH was the solvent due to the immiscibility of the [BEt3] solution (1.0 M solution in hexane) in methanol that limited the amount of B going into the films, thus preventing excessive doping.
| S-EPMC9671099 | biostudies-literature
Project description:An effective strategy for improving the charge transport efficiency of p-type Cu2O photocathodes is the use of counter n-type semiconductors with a proper band alignment, preferably using Al-doped ZnO (AZO). Atomic layer deposition (ALD)-prepared AZO films show an increase in the built-in potential at the Cu2O/AZO interface as well as an excellent conformal coating with a thin thickness on irregular Cu2O. Considering the thin thickness of the AZO overlayers, it is expected that the composition of the Al and the layer stacking sequence in the ALD process will significantly influence the charge transport behavior and the photoelectrochemical (PEC) performance. We designed various stacking orders of AZO overlayers where the stacking layers consisted of Al2O3 (or Al) and ZnO using the atomically controlled ALD process. Al doping in ZnO results in a wide bandgap and does not degrade the absorption efficiency of Cu2O. The best PEC performance was obtained for the sample with an AZO overlayer containing conductive Al layers in the bottom and top regions. The Cu2O/AZO/TiO2/Pt photoelectrode with this overlayer exhibits an open circuit potential of 0.63 V and maintains a high cathodic photocurrent value of approximately -3.2 mA cm-2 at 0 VRHE for over 100 min.
| S-EPMC8004703 | biostudies-literature
Project description:Silver nanowires in conjunction with sputter-coated Al-doped ZnO (AZO) thin films were used as a composite transparent top electrode for hybrid radial-junction ZnO nanowire/a-Si:H p-i-n thin-film solar cells. Solar cells with the composite nanowire top contacts attained a short-circuit current density (Jsc) of 13.9 mA/cm2 and a fill factor (FF) of 62% on glass substrates while a Jsc of 13.0 mA/cm2 and FF of 62% was achieved on plastic substrates. The power conversion efficiency (PCE) of the 3-dimensional solar cells improved by up to 60% compared to using AZO electrodes alone due to enhanced coverage of the top electrode over the 3-D structures, decreasing the series resistance of the device by 5×. The composite layer also showed a 10× reduction in sheet resistance compared to the AZO thin-film contact under applied mechanical strain.
| S-EPMC5566356 | biostudies-other